Skip to main content

Browse the archive

Staging
v0.5.1
swh:1:snp:c5feb7ee9221a3820c8879e85e8a18470c0b3afa
sort by:
Revision Author Date Message Commit Date
5788744 Junio C Hamano 02 July 2007, 07:35:58 UTC GIT 1.5.2.3 Signed-off-by: Junio C Hamano <gitster@pobox.com> 02 July 2007, 07:35:58 UTC
2064887 Matt Kraai 30 June 2007, 17:05:03 UTC Correct the name of NO_R_TO_GCC_LINKER in the comment describing it. Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> 30 June 2007, 18:16:09 UTC
181ea68 Sam Vilain 30 June 2007, 08:56:16 UTC git-remote: document -n The 'show' and 'prune' commands accept an option '-n'; document what it does. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Signed-off-by: Junio C Hamano <gitster@pobox.com> 30 June 2007, 17:50:28 UTC
38d697a Sam Vilain 30 June 2007, 08:56:12 UTC repack: improve documentation on -a option Some minor enhancements to the git-repack manual page. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Signed-off-by: Junio C Hamano <gitster@pobox.com> 30 June 2007, 17:50:18 UTC
b833651 Junio C Hamano 29 June 2007, 04:28:36 UTC Merge branch 'maint' of git://repo.or.cz/git-gui into maint * 'maint' of git://repo.or.cz/git-gui: git-gui: Don't require a .pvcsrc to create Tools/Migrate menu hack git-gui: Don't nice git blame on MSYS as nice is not supported git-gui: Don't require $DISPLAY just to get --version git-gui: Bind Tab/Shift-Tab to cycle between panes in blame git-gui: Correctly install to /usr/bin on Cygwin 29 June 2007, 04:28:36 UTC
7e508eb Shawn O. Pearce 26 June 2007, 19:27:35 UTC git-gui: Don't require a .pvcsrc to create Tools/Migrate menu hack The Tools/Migrate menu option is a hack just for me. Yes, that's right, git-gui has a hidden feature that really only works for me, and the users that I support within my day-job's great firewall. The menu option is not supported outside of that environment. In the past we only enabled Tools/Migrate if our special local script 'gui-miga' existed in the proper location, and if there was a special '.pvcsrc' in the top level of the working directory. This latter test for the '.pvcsrc' file is now failing, as the file was removed from all Git repositories due to changes made to other tooling within the great firewall's realm. I have changed the test to only work on Cygwin, and only if the special 'gui-miga' is present. This works around the configuration changes made recently within the great firewall's realm, but really this entire Tools/Migrate thing should be abstracted out into some sort of plugin system so other users can extend git-gui as they need. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 27 June 2007, 04:35:30 UTC
fffaaba Shawn O. Pearce 27 June 2007, 04:27:13 UTC git-gui: Don't nice git blame on MSYS as nice is not supported Johannes Sixt reported that MinGW/MSYS does not have a nice.exe to drop the priority of a child process when it gets spawned. So we have to avoid trying to start `git blame` through nice when we are on Windows and do not have Cygwin available to us. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 27 June 2007, 04:27:13 UTC
b69ba46 Frank Lichtenheld 25 June 2007, 14:03:54 UTC config: Change output of --get-regexp for valueless keys Print no space after the name of a key without value. Otherwise keys without values are printed exactly the same as keys with empty values. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 27 June 2007, 01:20:47 UTC
e373bb7 Frank Lichtenheld 25 June 2007, 14:03:53 UTC config: Complete documentation of --get-regexp The asciidoc documentation of the --get-regexp option was incomplete. Add some missing pieces: - List the option in SYNOPSIS - Mention that key names are printed Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 27 June 2007, 01:19:20 UTC
e3ae6bb Sam Vilain 26 June 2007, 23:44:22 UTC cleanup merge-base test script Add a picture, and keep the setup and the tests together. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Signed-off-by: Junio C Hamano <gitster@pobox.com> 27 June 2007, 01:17:53 UTC
1164f1e Linus Torvalds 26 June 2007, 21:34:02 UTC Fix zero-object version-2 packs A pack-file can get created without any objects in it (to transfer "no data" - which can happen if you use a reference git repo, for example, or just otherwise just end up transferring only branch head information and already have all the objects themselves). And while we probably should never create an index for such a pack, if we do (and we do), the index file size sanity checking was incorrect. This fixes it. Reported-and-tested-by: Jocke Tjernlund <tjernlund@tjernlund.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> 27 June 2007, 01:02:15 UTC
582c739 Sven Verdoolaege 26 June 2007, 21:19:41 UTC Ignore submodule commits when fetching over dumb protocols Without this patch, the code would look for the submodule commits in the superproject and (needlessly) fail when it couldn't find them. Signed-off-by: Sven Verdoolaege <skimo@liacs.nl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> 27 June 2007, 01:02:13 UTC
4e817d1 Shawn O. Pearce 22 June 2007, 05:10:12 UTC git-gui: Don't require $DISPLAY just to get --version Junio asked that we don't force the user to have a valid X11 server configured in $DISPLAY just to obtain the output of `git gui version`. This makes sense, the user may be an automated tool that is running without an X server available to it, such as a build script or other sort of package management system. Or it might just be a user working in a non-GUI environment and wondering "what version of git-gui do I have installed?". Tcl has a lot of warts, but one of its better ones is that a comment can be continued to the next line by escaping the LF that would have ended the comment using a backslash-LF sequence. In the past we have used this trick to escape away the 'exec wish' that is actually a Bourne shell script and keep Tcl from executing it. I'm using that feature here to comment out the Bourne shell script and hide it from the Tcl engine. Except now our Bourne shell script is a few lines long and checks to see if it should print the version, or not. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 22 June 2007, 05:10:12 UTC
fb626dc Shawn O. Pearce 12 June 2007, 04:04:30 UTC git-gui: Bind Tab/Shift-Tab to cycle between panes in blame The blame viewer is composed of two different areas, the file area on top and the commit area on the bottom. If users are trying to shift the focus it is probably because they want to shift from one area to the other, so we just setup Tab and Shift-Tab to jump from the one half to the other in a cycle. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 21 June 2007, 03:25:23 UTC
82a2d6b Shawn O. Pearce 19 June 2007, 14:48:09 UTC git-gui: Correctly install to /usr/bin on Cygwin Mark Levedahl <mlevedahl@gmail.com> noted that installation on Cygwin to /usr/bin can cause problems with the automatic guessing of our library location. The problem is that installation to /usr/bin means we actually have: /usr/bin = c:\cygwin\bin /usr/share = c:\cygwin\usr\share So git-gui guesses that its library should be found within the c:\cygwin\share directory, as that is where it should be relative to the script itself in c:\cygwin\bin. In my first version of this patch I tried to use `cygpath` to resolve /usr/bin and /usr/share to test that they were in the same relative locations, but that didn't work out correctly as we were actually testing /usr/share against itself, so it always was equal, and we always used relative paths. So my original solution was quite wrong. Mark suggested we just always disable relative behavior on Cygwin, because of the complexity of the mount mapping problem, so that's all I'm doing. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 21 June 2007, 03:22:49 UTC
c7c8485 Junio C Hamano 16 June 2007, 06:58:18 UTC GIT 1.5.2.2 Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 08:13:35 UTC
4c7100a Junio C Hamano 15 June 2007, 05:20:16 UTC Documentation: adjust to AsciiDoc 8 It turns out that the attribute definition we have had for a long time to hide "^" character from AsciiDoc 7 was not honored by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is a similar breakage with the "compatible" mode with + characters. The double colon at the end of definition list term needs to be attached to the term, without a whitespace. After this minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with compatibility mode seems to produce reasonably good results. Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 08:11:16 UTC
66e41f7 Junio C Hamano 16 June 2007, 06:48:35 UTC Avoid diff cost on "git log -z" Johannes and Marco discovered that "git log -z" spent cycles in diff even though there is no need to actually compute diffs. Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 06:48:35 UTC
7b99bef Junio C Hamano 16 June 2007, 06:35:32 UTC git-branch --track: fix tracking branch computation. The original code did not take hierarchical branch names into account at all. [jc: cherry-picked 11f68d9 from 'master'] Tested-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 06:35:32 UTC
1367214 Junio C Hamano 16 June 2007, 06:33:06 UTC $EMAIL is a last resort fallback, as it's system-wide. $EMAIL is a system-wide setup that is used for many many many applications. If the git user chose a specific user.email setup, then _this_ should be honoured rather than $EMAIL. [jc: cherry-picked ec563e8 from 'master'] Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 06:33:06 UTC
fadf488 Johannes Schindelin 05 June 2007, 02:36:49 UTC merge-recursive: refuse to merge binary files [jc: cherry-picked 9f30855 from 'master'] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 06:28:10 UTC
634cd48 Johannes Schindelin 05 June 2007, 02:36:11 UTC Move buffer_is_binary() to xdiff-interface.h We already have two instances where we want to determine if a buffer contains binary data as opposed to text. [jc: cherry-picked 6bfce93e from 'master'] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 06:27:23 UTC
fa0c87c Alex Riesen 13 June 2007, 18:54:32 UTC Add a local implementation of hstrerror for the system which do not have it The function converts the value of h_errno (last error of name resolver library, see netdb.h). One of systems which supposedly do not have the function is SunOS. POSIX does not mandate its presence. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 05:48:34 UTC
18a9368 Jakub Narebski 13 June 2007, 23:12:20 UTC Generated spec file to be ignored is named git.spec and not git-core.spec Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 16 June 2007, 05:43:58 UTC
4f01d0f Junio C Hamano 13 June 2007, 03:48:31 UTC Merge branch 'ar/clone' into maint * ar/clone: Fix clone to setup the origin if its name ends with .git 13 June 2007, 03:48:31 UTC
44bdc43 Junio C Hamano 13 June 2007, 03:48:21 UTC Merge branch 'sv/objfixes' into maint * sv/objfixes: Don't assume tree entries that are not dirs are blobs 13 June 2007, 03:48:21 UTC
2cf69cf Kristian Høgsberg 11 June 2007, 17:04:40 UTC Unquote From line from patch before comparing with given from address. This makes --suppress-from actually work when you're unfortunate enough to have non-ASCII in your name. Also, if there's a match use the optionally RFC2047 quoted version from the email. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 12 June 2007, 07:13:49 UTC
6894f49 Luiz Fernando N. Capitulino 11 June 2007, 12:56:56 UTC git-cherry: Document 'limit' command-line option Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Junio C Hamano <gitster@pobox.com> 12 June 2007, 07:13:20 UTC
31c74ca Junio C Hamano 12 June 2007, 07:05:24 UTC Merge branch 'maint' of git://repo.or.cz/git-gui into maint * 'maint' of git://repo.or.cz/git-gui: git-gui: Save geometry before the window layout is damaged git-gui: Give amend precedence to HEAD over MERGE_MSG git-gui: Include 'war on whitespace' fixes from git.git 12 June 2007, 07:05:24 UTC
39fa2a9 Shawn O. Pearce 12 June 2007, 03:52:43 UTC git-gui: Save geometry before the window layout is damaged Because Tk does not assure us the order that it will process children in before it destroys the main toplevel we cannot safely save our geometry data during a "bind . <Destroy>" event binding. The geometry may have already changed as a result of a one or more children being removed from the layout. This was pointed out in gitk by Mark Levedahl, and patched over there by commit b6047c5a8166a71e01c6b63ebbb67c6894d95114. So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when the window is closed by the user, and forward that close event to our main do_quit routine. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 12 June 2007, 03:52:43 UTC
b2f3bb1 Shawn O. Pearce 11 June 2007, 23:39:55 UTC git-gui: Give amend precedence to HEAD over MERGE_MSG Apparently git-commit.sh (the command line commit user interface in core Git) always gives precedence to the prior commit's message if `commit --amend` is used and a $GIT_DIR/MERGE_MSG file also exists. We actually were doing the same here in git-gui, but the amended message got lost if $GIT_DIR/MERGE_MSG already existed because we started a rescan immediately after loading the prior commit's body into the edit buffer. When that happened the rescan found MERGE_MSG existed and replaced the commit message buffer with the contents of that file. This meant the user never saw us pick up the commit message of the prior commit we are about to replace. Johannes Sixt <J.Sixt@eudaptics.com> found this bug in git-gui by running `git cherry-pick -n $someid` and then trying to amend the prior commit in git-gui, thus combining the contents of $someid with the contents of HEAD, and reusing the commit message of HEAD, not $someid. With the recent changes to make cherry-pick use the $GIT_DIR/MERGE_MSG file Johannes saw git-gui pick up the message of $someid, not HEAD. Now we always use HEAD if we are amending. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 11 June 2007, 23:48:41 UTC
615b865 Shawn O. Pearce 11 June 2007, 23:06:10 UTC git-gui: Include 'war on whitespace' fixes from git.git Earlier git.git applied a large "war on whitespace" patch that was created using 'apply --whitespace=strip'. Unfortunately a few of git-gui's own files got caught in the mix and were also cleaned up. That was a6080a0a44d5ead84db3dabbbc80e82df838533d. This patch is needed in git-gui.git to reapply those exact same changes here, otherwise our version generator script is unable to obtain our version number from git-describe when we are hosted in the git.git repository. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 11 June 2007, 23:06:10 UTC
c288a2f Junio C Hamano 11 June 2007, 07:51:39 UTC Merge branch 'maint' of git://repo.or.cz/git-gui into maint * 'maint' of git://repo.or.cz/git-gui: (46 commits) git-gui: Changed blame header bar background to match main window git-gui: Favor the original annotations over the recent ones git-gui: Improve our labeling of blame annotation types git-gui: Use three colors for the blame viewer background git-gui: Jump to original line in blame viewer git-gui: Display both commits in our tooltips git-gui: Run blame twice on the same file and display both outputs git-gui: Display the "Loading annotation..." message in italic git-gui: Rename fields in blame viewer to better descriptions git-gui: Label the uncommitted blame history entry git-gui: Switch internal blame structure to Tcl lists git-gui: Cleanup redundant column management in blame viewer git-gui: Better document our blame variables git-gui: Remove unused commit_list from blame viewer git-gui: Automatically expand the line number column as needed git-gui: Make the line number column slightly wider in blame git-gui: Use lighter colors in blame view git-gui: Remove unnecessary space between columns in blame viewer git-gui: Remove the loaded column from the blame viewer git-gui: Clip the commit summaries in the blame history menu ... 11 June 2007, 07:51:39 UTC
23c9ccb J. Bruce Fields 10 June 2007, 20:20:34 UTC tutorial: use "project history" instead of "changelog" in header The word "changelog" seems a little too much like jargon to me, and beginners must understand section headers so they know where to look for help. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> 10 June 2007, 20:46:17 UTC
d9bd321 J. Bruce Fields 06 February 2007, 07:55:07 UTC Documentation: user-manual todo Some more user-manual todo's: how to share objects between repositories, how to recover. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> 10 June 2007, 20:39:53 UTC
8ceca74 J. Bruce Fields 05 June 2007, 22:42:58 UTC user-manual: add a missing section ID I forgot to give an ID for this section. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> 10 June 2007, 20:38:50 UTC
1da158e Gerrit Pape 05 June 2007, 08:47:51 UTC Fix typo in remote branch example in git user manual In Documentation/user-manual.txt the example $ git checkout --track -b origin/maint maint under "Getting updates with git pull", should read $ git checkout --track -b maint origin/maint This was noticed by Ron, and reported through http://bugs.debian.org/427502 Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> 10 June 2007, 20:38:50 UTC
99f171b J. Bruce Fields 05 June 2007, 22:33:27 UTC user-manual: quick-start updates Update text to reflect new position in appendix. Update the name to reflect the fact that this is closer to reference than tutorial documentation (as suggested by Jonas Fonseca). Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> 10 June 2007, 20:38:50 UTC
29cf5e1 william pursell 09 June 2007, 15:44:12 UTC Make command description imperative statement, not third-person present. In several of the text messages, the tense of the verb is inconsistent. For example, "Add" vs "Creates". It is customary to use imperative for command description. Signed-off-by: Junio C Hamano <gitster@pobox.com> 09 June 2007, 17:42:48 UTC
5035242 Junio C Hamano 08 June 2007, 08:19:13 UTC checkout: do not get confused with ambiguous tag/branch names Although it is not advisable, we have always allowed a branch and a tag to have the same basename (i.e. it is not illegal to have refs/heads/frotz and refs/tags/frotz at the same time). When talking about a specific commit, the interpretation of 'frotz' has always been "use tag and then check branch", although we warn when ambiguities exist. However "git checkout $name" is defined to (1) first see if it matches the branch name, and if so switch to that branch; (2) otherwise it is an instruction to detach HEAD to point at the commit named by $name. We did not follow this definition when $name appeared under both refs/heads/ and refs/tags/ -- we switched to the branch but read the tree from the tagged commit, which was utterly bogus. Signed-off-by: Junio C Hamano <gitster@pobox.com> 08 June 2007, 08:19:13 UTC
d80ded0 Shawn O. Pearce 08 June 2007, 06:02:48 UTC git-gui: Changed blame header bar background to match main window The main window's diff header bar background switched from orange to gold recently, and I liked the effect it had on readability of the text. Since I wanted the blame viewer to match, here it is. Though this probably should be a user defined color, or at least a constant somewhere that everyone can reference. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 08 June 2007, 06:50:07 UTC
defe13a Alex Riesen 06 June 2007, 23:39:05 UTC Fix clone to setup the origin if its name ends with .git The problem is visible when cloning a local repo. The cloned repository will have the origin url setup incorrectly: the origin name will be copied verbatim in origin url of the cloned repository. Normally, the name is to be expanded into absolute path. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> 06 June 2007, 23:40:03 UTC
e2ac7cb Sam Vilain 06 June 2007, 10:25:17 UTC Don't assume tree entries that are not dirs are blobs When scanning the trees in track_tree_refs() there is a "lazy" test that assumes that entries are either directories or files. Don't do that. Signed-off-by: Junio C Hamano <gitster@pobox.com> 06 June 2007, 22:43:18 UTC
23fcdc7 Michael Milligan 05 June 2007, 06:06:30 UTC git-cvsimport: Make sure to use $git_dir always instead of .git sometimes CVS import was failing on a couple repos I was trying to import. I was setting GIT_DIR=newproj.git and using the -i flag, but this bug was thwarting the effort... evil CVS. Signed-off-by: Junio C Hamano <gitster@pobox.com> 06 June 2007, 22:23:35 UTC
e59ade9 Sam Vilain 06 June 2007, 21:23:16 UTC fix documentation of unpack-objects -n unpack-objects -n didn't print the object list as promised on the manual page, so alter the documentation to reflect the behaviour Signed-off-by: Junio C Hamano <gitster@pobox.com> 06 June 2007, 22:20:13 UTC
a1a5a63 Johannes Sixt 06 June 2007, 08:11:55 UTC Accept dates before 2000/01/01 when specified as seconds since the epoch Tests with git-filter-branch on a repository that was converted from CVS and that has commits reaching back to 1999 revealed that it is necessary to parse dates before 2000/01/01 when they are specified as seconds since 1970/01/01. There is now still a limit, 100000000, which is 1973/03/03 09:46:40 UTC, in order to allow that dates are represented as 8 digits. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com> 06 June 2007, 22:20:12 UTC
0f32da5 Shawn O. Pearce 06 June 2007, 07:22:22 UTC git-gui: Favor the original annotations over the recent ones Usually when you are looking at blame annotations for a region of a file you are more interested in why something was originally done then why it is here now. This is because most of the time when we get original annotation data we are looking at a simple refactoring performed to better organize code, not to change its semantic meaning or function. Reorganizations are sometimes of interest, but not usually. We now show the original commit data first in the tooltip. This actually looks quite nice as the original commit will usually have an author date prior to the current (aka move/copy) annotation's commit, so the two commits will now tend to appear in chronological order. I also found myself to always be clicking on the line of interest in the file column but I always wanted the original tracking data and not the move/copy data. So I changed our default commit from $asim_data (the simple move/copy annotation) to the more complex $amov_data (the -M -C -C original annotation). Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 07:22:22 UTC
949da61 Shawn O. Pearce 06 June 2007, 07:03:16 UTC git-gui: Improve our labeling of blame annotation types It feels wrong to call the -M -C -C annotations "move/copy tracking" as they are actually the original locations. So I'm relabeling the status bar to show "copy/move tracking annotations" for the current file (no -M -C -C) as that set of annotations tells us who put the hunk here (who moved/copied it). I'm now calling the -M -C -C pass "original location annotations" as that's what we're really digging for. I also tried to clarify some of the text in the hover tooltip. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 07:03:52 UTC
5d198d6 Shawn O. Pearce 06 June 2007, 06:53:36 UTC git-gui: Use three colors for the blame viewer background To prevent neighboring lines that are different commits from using the same background color we now use 3 colors and assign them by selecting the color that is not used before or after the line in question. We still color "on the fly" as we receive hunks from git-blame, but we delay our color decisions until we are getting the original location data (the slower -M -C -C pass) as that is usually more fine-grained than the current location data. Credit goes to Martin Waitz for the tri-coloring concept. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 06:53:36 UTC
0dfed77 Shawn O. Pearce 04 June 2007, 08:07:35 UTC git-gui: Jump to original line in blame viewer When the user clicks on a commit link within one of the columns in the blame viewer we now jump them not just to that commit/file pair but also to the line of the original file. This saves the user a lot of time, as they don't need to search through the new file data for the chunk they were previously looking at. We also restore the prior view when the user clicks the back button to return to a pior commit/file pair that they were looking at. Turned out this was quite tricky to get working in Tk. Every time I tried to jump the text widgets to the correct locations by way of the "yview moveto" or "see" subcommands Tk performed the change until the current event finished dispatching, and then reset the views back to 0, making the change never take place. Forcing Tk to run the pending events before we jump the UI resolves the issue. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:52 UTC
383d4e0 Shawn O. Pearce 02 June 2007, 23:03:55 UTC git-gui: Display both commits in our tooltips If we have commit data from both the simple blame and the rename/move tracking blame and they differ than there is a bigger story to tell. We now include data from both commits so that the user can see that this link as moved, who moved it, and where it originated from. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:52 UTC
172c92b Shawn O. Pearce 02 June 2007, 22:21:18 UTC git-gui: Run blame twice on the same file and display both outputs We now perform two passes over any input file given to the blame viewer. Our first pass is a quick "git-blame" with no options, getting the details of how each line arrived into this file. We are specifically ignoring/omitting the rename detection logic as this first pass is to determine why things got into the state they are in. Once the first pass is complete and is displayed in the UI we run a second pass, using the much more CPU intensive "-M -C -C" options to perform extensive rename/movement detection. The output of this second pass is shown in a different column, allowing the user to see for any given line how it got to be, and if it came from somewhere else, where that is. This is actually very instructive when run on our own lib/branch.tcl script. That file grew recently out of a very large block of code in git-gui.sh. The first pass shows when I created that file, while the second pass shows the original commit information. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:51 UTC
debcd0f Shawn O. Pearce 02 June 2007, 21:15:56 UTC git-gui: Display the "Loading annotation..." message in italic If the user clicks on a line region that we haven't yet received an annotation for from git-blame we show them "Loading annotation". But I don't want the user to confuse this loading message with a commit whose first line is "Loading annotation" and think we messed up our display somehow. Since we never use italics for anything else, I'm going with the idea that italic slant can be used to show data is missing/elided out at the time being. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:51 UTC
fc816d7 Shawn O. Pearce 03 June 2007, 03:26:24 UTC git-gui: Rename fields in blame viewer to better descriptions Calling the commit message pane $w_cmit is a tad confusing when we also have the $w_cgrp column that shows the abbreviated SHA-1s. So w_cmit -> w_cviewer, as it is the "commit viewer"; and w_cgrp -> w_amov as it is the "annotated commit + move tracking" column. Also changed line_data -> amov_data, as that list is exactly the results shown in w_amov. Why call the column "move tracking"? Because this column holds data from "git blame -M -C". I'm considering adding an additional column that holds the data from "git blame" without -M/-C, showing who did the copy/move, and when they did it. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:51 UTC
c5db65a Shawn O. Pearce 02 June 2007, 20:03:52 UTC git-gui: Label the uncommitted blame history entry If the user runs the blame viewer on a working directory file instead of a specific commit-ish then we have no value for the commit SHA1 or the summary line; this causes the history menu to get an empty entry at the very bottom. We now look for this odd case and call the meny entry "Working Directory". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:50 UTC
2f85b7e Shawn O. Pearce 02 June 2007, 20:01:43 UTC git-gui: Switch internal blame structure to Tcl lists The Tcl list datatype is significantly faster to work with than the array type, especially if our indexes are a consecutive set of numbers, like say line numbers in a file. This rather large change reorganizes the internal data structure of the blame viewer to use a proper Tcl list for the annotation information about a line. Each line is given its own list within the larger line_data list, where the indexes correspond to various facts about that particular line. The interface does seem to be more responsive this way, with less time required by Tcl to process blame, and to switch to another version of the same file. It could just be a placebo effect, but either way most Tcl experts perfer lists for this type of work over arrays. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:50 UTC
14c4dfd Shawn O. Pearce 02 June 2007, 19:34:52 UTC git-gui: Cleanup redundant column management in blame viewer The code to handle our three different text widgets is a bit on the messy side as we issue the same command on all three widgets one at a time. Adding (or removing) columns from the viewer is messy, as a lot of locations need to have the new column added into the sequence, or removed from it. We also now delete the tags we create for each commit when we switch to display another "commit:path" pair. This way the text viewer doesn't get bogged down with a massive number of tags as we traverse through history. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:50 UTC
c17c175 Shawn O. Pearce 02 June 2007, 19:13:35 UTC git-gui: Better document our blame variables The array variable "order" used to be used to tell us in what order each commit was received in. Recent changes have removed that need for an ordering and the "order" array is now just a boolean 'do we have that commit yet' flag. The colors were moved to fields, so they appear inside of the blame viewer instance. This keeps two different concurrently running blame viewers from stepping on each other's ordering of the colors in group_colors. Most of the other fields were moved around a little bit so that they are organized by major category and value lifespan. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:50 UTC
b611015 Shawn O. Pearce 02 June 2007, 18:45:35 UTC git-gui: Remove unused commit_list from blame viewer This list used to store the commits in the order we received them in. I originally was using it to update the colors of the commit before and the commit after the current commit, but since that interface concept turned out to be horribly ugly and has been removed we no longer need this list. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:49 UTC
81fb7ef Shawn O. Pearce 02 June 2007, 18:41:10 UTC git-gui: Automatically expand the line number column as needed After we finish reading a chunk of data from the file stream we know how many digits we need in the line number column to show the current maximum line number. If our line number column isn't wide enough, we should expand it out to the correct width. Any file over our default allowance of 5 digits (99,999 lines) is so large that the slight UI "glitch" when we widen the column out is trivial compared to the time it will take Git to fully do the annotations. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:49 UTC
375e136 Shawn O. Pearce 02 June 2007, 18:35:44 UTC git-gui: Make the line number column slightly wider in blame Most source code files are under 9,999 lines of text, so using a field width of 5 characters meant that we should have had one char padding on the left edge (because we right-justify the line number). Unfortunately when I added the right margin earlier (when I removed the padding) I ate into the extra character's space, losing the left margin. This put the line numbers too close to the commit column in any file with more than 999 lines in it. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:49 UTC
000a106 Shawn O. Pearce 02 June 2007, 18:31:01 UTC git-gui: Use lighter colors in blame view The colors I originally picked out on a Mac OS X system look a tad too dark on a Windows 2000 system; the greys are dark enough to make it difficult to read some lines of text and the green used to highlight the current commit was also difficult to read text on. I also added a third grey to the mix, to try and help some files that wind up with a number of neighboring chunks getting the same colors. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:49 UTC
0632570 Shawn O. Pearce 02 June 2007, 06:55:53 UTC git-gui: Remove unnecessary space between columns in blame viewer On Mac OS X the OS has "features" that like to draw thick black borders around the text field that has focus. This is nice if you want to know where your text is going and are blind as a bat, but it isn't the best thing to have in a table that is being faked through the abuse of Tk text widgets. By setting our takefocus, highlightthickness and padx/y we can get rid of this border and get our text widgets packed right next to each other, with no padding between them. This makes the blame background color smoothly run across the entire line of commit data, line number and file content. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:48 UTC
0eab69a Shawn O. Pearce 02 June 2007, 06:38:26 UTC git-gui: Remove the loaded column from the blame viewer Originally I had placed this loaded column between the line number and the file line data to help users know if a particular line has received annotation data or not yet. This way users would know if the line(s) they were interested in were ready for viewing, or if they still had to wait. It also was an entertaining way for the user to spend their time waiting for git-blame --incremental to compute the complete set of annotations. However it is completely useless now that we show the abbreviated commit SHA-1 and author initials in the leftmost column. That area is empty until we get the annotation data, and as soon as we get it in we display something there, indicating to the user that there is now blame data ready. Further with the tooltips the user is likely to see the data as soon as it comes in, as they are probably not keeping their mouse perfectly still. So I'm removing the field to save screen space for more useful things, like file content. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:48 UTC
b55a243 Shawn O. Pearce 02 June 2007, 04:09:55 UTC git-gui: Clip the commit summaries in the blame history menu Some commit lines can get really long when users enter a lot of text without linewrapping (for example). Rather than letting the menu get out of control in terms of width we clip the summary to the first 50+ characters. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:48 UTC
08dda17 Shawn O. Pearce 02 June 2007, 03:48:18 UTC git-gui: Use a label instead of a button for the back button Apparently Tk on Mac OS X won't draw a button with an image using a transparent background. Instead it draws the button using some sort of 3D effect, even though I asked for no relief and no border. The background is also not our orange that we expected it to be. Earlier I had tried this same trick on Windows and it draws the same way as the button did, so I'm going to switch to the label as that seems to be more portable. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:48 UTC
79c50bf Shawn O. Pearce 02 June 2007, 01:59:29 UTC git-gui: Show original filename in blame tooltip If we have two commits right next to each other in the final file and they were kept as different blocks in the leftmost column then its probably because the original filename was different. To help the user know where they are digging into when they click on that link we now show the original file in the tooltip, but to save space we do so only if the original file is not the same as the file we are currently viewing. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:47 UTC
669fbc3 Shawn O. Pearce 02 June 2007, 01:54:06 UTC git-gui: Combine blame groups only if commit and filename match Consecutive chunks of a file could come from the same commit, but have different original file names. Previously we would have put them into a single group, but then the hyperlink would jump to only one of the files, and the other would not be accessible. Now we can get to the other file too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:47 UTC
22c6769 Shawn O. Pearce 02 June 2007, 01:47:12 UTC git-gui: Allow digging through history in blame viewer gitweb has long had a feature where the user can click on any commit the blame display and go visit that commit's information page. From the user could go get the blame display for the file they are tracking, and try to digg through the history of any part of the code they are interested in seeing. We now offer somewhat similiar functionality in git-gui. The 4 digit commit abreviation in the first column of our blame view is now offered as a hyperlink if the commit isn't the one we are now viewing the blame output for (as there is no point in linking back to yourself). Clicking on that link will stop the current blame engine (if still running), push the new target commit onto the history stack, and restart the blame viewer at that commit, using the "original file name" as supplied by git-blame for that chunk of the output. Users can navigate back to a version they had been viewing before by way of a back button, which offers the prior commits in a popup menu displayed right below the back button. I'm always showing the menu here as the cost of switching between views is very high; you don't want to jump to a commit you are not interested in looking at again. During switches we throw away all data except the cached commit data, as that is relatively small compared to most source files and their annotation marks. Unfortunately throwing this per-file data away in Tcl seems to take some time; I probably should move the line indexed arrays to proper lists and use [lindex] rather than the array lookup (usually lists are faster). We now start the git-blame process using "nice", so that its priority will drop hopefully below our own. If I don't do this the blame engine gets a lot of CPU under Windows 2000 and the git-gui user interface is almost non-responsive, even though Tcl is just sitting there waiting for events. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:47 UTC
982cf98 Shawn O. Pearce 01 June 2007, 22:29:20 UTC git-gui: Display a progress bar during blame annotation gathering Computing the blame records for a large file with a long project history can take git a while to run; traditionally we have shown a little meter in the status area of our blame viewer that lets the user know how many lines have been finished, and how far we are through the process. Usually such progress indicators are drawn with a little progress bar in the window, where the bar shows how much has been completed and hides itself when the process is complete. I'm using a very simple hack to do that: draw a canvas with a filled rectangle. Of course the time remaining has absolutely no relationship to the progress meter. It could take very little time for git-blame to get the first 90% of the file, and then it could take many times that to get the remaining 10%. So the progress meter doesn't really have any sort of assurances that it relates to the true progress of the work. But in practice on some ugly history it does seem to hold a reasonable indicator to the completion status. Besides, its amusing to watch and that keeps the user from realizing git is being somewhat slow. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:47 UTC
d0b741d Shawn O. Pearce 01 June 2007, 21:55:43 UTC git-gui: Allow the user to control the blame/commit split point At one point I tried to present the blame viewer to an audience of people on a 640 by 480 pixel LCD projector. This did not work at all as the top area (the file data) was taking up all of the screen realestate and the split point was not adjustable by the user. In general locking the user into a specific ratio of display is just not user friendly. So we now place a split pane control into the middle of our blame window, so the user can adjust it to their current needs. If the window increases (or decreases) in height we assign the difference to the file data area, as that is generally the area of the window that users are trying to see more of when they grow the window. Unfortunately there appears to be a bug in the "pack" layout manager in Tcl/Tk 8.4.1. The status bar and the lower commit pane was being squashed if the window decreased in height. I think the pack manager was just not decreasing the size of the panedwindow slave properly if the main window shrank. Switching to the "grid" layout manager fixes the problem, but is slightly uglier setup code. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:46 UTC
223475a Shawn O. Pearce 01 June 2007, 20:10:56 UTC git-gui: Show author initials in blame groups Frequently when I'm looking at blocks of code in the blame viewer I want to know who is the culprit, or who I should be praising for a job well done. The tooltips nicely show this if I mouse over a block, but it doesn't work to get this detail at a glance. Since we don't use the leftmost commit column for anything after the first line within a commit group I'm now tossing the author's initials into that field, right justified. It is quite clearly not a SHA-1 number as we always show the SHA-1 in lowercase, while we explicitly select only the uppercase characters from an author's name field, and only those that are following whitespace. I'm using initials here over anything else as they are quite commonly unique within small development teams. The leading part of the email address field was out for some of the teams I work with, as there the email addresses are all of the form "Givenname.Surname@initech.com". That will never fit into the 4 characters available. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:46 UTC
ddc1fa8 Shawn O. Pearce 01 June 2007, 19:31:01 UTC git-gui: Space the commit group continuation out in blame view The | in the continued lines of the same commit group as not easily seen on the left edge; putting a single space in front of the pipe makes it slightly more visually appealing to me as I can follow the line down through the group to the next commit marker. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:46 UTC
b5a4122 Shawn O. Pearce 01 June 2007, 07:34:00 UTC git-gui: Cleanup minor style nit Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:46 UTC
8154e1a Shawn O. Pearce 01 June 2007, 07:33:28 UTC git-gui: Remove unnecessary reshow of blamed commit Because we no longer redraw colors every time we select a particular commit there is no need to redraw the screen after we get a new commit in from blame --incremental. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:45 UTC
74fe898 Shawn O. Pearce 01 June 2007, 07:19:27 UTC git-gui: Highlight the blame commit header from everything else The selected commit's blame header is now drawn in green, using the same background color that is shown in the main file content viewer. The result is a much better looking commit pane, as we use bold for header "keys" and proportional width fonts for the stuff that doesn't need to be fixed width to maintain its formatting. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:45 UTC
41bf23d Shawn O. Pearce 01 June 2007, 07:01:45 UTC git-gui: Display tooltips in blame viewer When the mouse is over a particular line and we have blame data for that line, but its not the active commit, we should show the user information about that commit like who the author was and what the subject (first line) was. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:45 UTC
37ebc93 Shawn O. Pearce 01 June 2007, 06:59:21 UTC git-gui: Use arror cursor in blame viewer file data Since we don't allow the user to select text from the file viewer right now I'm disabling the normal text cursor and putting in a plain arror instead. This way users don't think they can select and copy text, because they can't. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:45 UTC
c9e6bfd Shawn O. Pearce 01 June 2007, 05:04:46 UTC git-gui: Simplify consecutive lines that come from the same commit If two consecutive lines in the final file came from the same commit then we store a "|" in the first column rather than the commit id, for the second and subsequent lines in that block. This cleans up the interface so runs associated with the same commit can be more easily seen visually. We also now use the abbreviation "work" for the uncommitted stuff in your working directory, rather than "0000". This looks nicer to the eyes and explains pretty quickly what is going on. There was also a minor bug in the commit abbreviation column for the last line of the file. This is now also fixed. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:44 UTC
f96cd7b Shawn O. Pearce 01 June 2007, 04:38:31 UTC git-gui: Improve the coloring in blame viewer The git-gui blame viewer has always been ugly as s**t. Linus Torvalds suggested the coloring scheme I'm using here, which is two different shades of grey for the background colors, and black text on a pale green background for the currently selected/focused commit. The difference is a massive improvement. The interface no longer will cause seizures in people who are prone to that sort of thing. It no longer uses a very offensive hot pink. The green being current actually makes sense. And not having the background of the other non-current lines change when you change the current commit is really a big deal. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:43 UTC
bea39c2 Shawn O. Pearce 01 June 2007, 04:08:58 UTC git-gui: Remove empty blank line at end of blame The blame viewer has this silly blank line at the bottom of it; we really don't want to see it displayed as we will never get any blame data for that line (it doesn't exist in the source). Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:43 UTC
d89a494 Shawn O. Pearce 01 June 2007, 04:05:49 UTC git-gui: Cleanup blame::new widget initialization A lot of this code was pre-class, which meant that I just sort of copied and pasted my way through it, rather than being really smart and using a variable for each widget's path name. Since we have a field for each path, we can use those throughout the constructor and make things a lot neater. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:43 UTC
a46fe1c Shawn O. Pearce 01 June 2007, 03:58:55 UTC git-gui: Add a 4 digit commit abbreviation to the blame viewer We now show the first 4 digits of each commit in the left most column of our blame viewer, before the line numbers. These are drawn as the data becomes available from git-blame --incremental, and helps the user to visually group lines together. I'm using only the first 4 digits because within a given cluster of lines its unlikely that two neighboring commits will have the same 4 digit prefix. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:26:42 UTC
9adccb0 Matthijs Melchior 05 June 2007, 21:50:02 UTC New selection indication and softer colors The default font was already bold, so marking the selected file with bold font did not work. Change that to lightgray background. Also, the header colors are now softer, giving better readability. Signed-off-by: Matthijs Melchior <mmelchior@xs4all.nl> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 06 June 2007, 05:14:12 UTC
cb8773d Shawn O. Pearce 03 June 2007, 00:09:00 UTC Revert "Make the installation target of git-gui a little less chatty" This reverts commit c289f6fa1f8642a5caf728ef8ff87afd5718cd99. Junio pointed out that Alex's change breaks in some cases, like when V=1, and is more verbose than it should be even if that worked. I'm backing it out and redoing it. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 03 June 2007, 01:01:29 UTC
cfb07cc Shawn O. Pearce 02 June 2007, 20:11:26 UTC git-gui: Verify Tcl/Tk is new enough for our needs For quite a while we have been assuming the user is running on a Tcl/Tk 8.4 or later platform. This may not be the case on some very old systems. Unfortunately I am pretty far down the path of using the Tcl/Tk 8.4 commands and options and cannot easily work around them to support earlier versions of Tcl/Tk. So we'll check that we are using the correct version up front, and if not we'll stop with a related error message. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 03 June 2007, 00:00:55 UTC
6309172 Shawn O. Pearce 02 June 2007, 21:18:46 UTC git-gui: Attach font_ui to all spinbox widgets Earlier I missed making sure our spinbox widgets used the same font as the other widgets around them. This meant that using a main font with a size of 20 would make every widget in the options dialog huge, but the spinboxes would be left with whatever the OS native font is. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 02 June 2007, 23:56:27 UTC
41cf68a Junio C Hamano 02 June 2007, 22:01:33 UTC GIT 1.5.2.1 Signed-off-by: Junio C Hamano <junkio@cox.net> 02 June 2007, 23:02:49 UTC
996e2d6 Kristian Høgsberg 01 June 2007, 21:08:12 UTC Use =20 when rfc2047 encoding spaces. Encode ' ' using '=20' even though rfc2047 allows using '_' for readability. Unfortunately, many programs do not understand this and just leave the underscore in place. Using '=20' seems to work better. [jc: with adjustment to t3901] Signed-off-by: Kristian Høgsberg <hoegsberg@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net> 02 June 2007, 19:00:26 UTC
cedb8d5 Josh Triplett 02 June 2007, 17:08:54 UTC Create a new manpage for the gitignore format, and reference it elsewhere Only git-ls-files(1) describes the gitignore format in detail, and it does so with reference to git-ls-files options. Most users don't use the plumbing command git-ls-files directly, and shouldn't have to look in its manpage for information on the gitignore format. Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor out the gitignore documentation into that file, changing it to refer to .gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference gitignore(5) from other relevant manpages and documentation. Remove now-redundant information on exclude patterns from git-ls-files(1), leaving only information on how git-ls-files options specify exclude patterns and what precedence they have. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net> 02 June 2007, 18:59:19 UTC
4159c57 Jeff King 01 June 2007, 09:10:30 UTC Documentation: robustify asciidoc GIT_VERSION replacement Instead of using sed on the resulting file, we now have a git_version asciidoc attribute. This means that we don't pipe the output of asciidoc, which means we can detect build failures. Problem reported by Scott Lamb, solution suggested by Jonas Fonseca. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net> 02 June 2007, 18:28:13 UTC
160e822 Shawn O. Pearce 01 June 2007, 22:20:30 UTC git-gui: Don't quit when we destroy a child widget Its wrong to exit the application if we destroy a random widget contained withing something else; especially if its some small trivial thing that has no impact on the overall operation. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 02 June 2007, 03:12:56 UTC
c289f6f Alex Riesen 01 June 2007, 23:09:56 UTC Make the installation target of git-gui a little less chatty Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 02 June 2007, 03:08:29 UTC
b8848f7 Shawn O. Pearce 01 June 2007, 03:32:54 UTC git-gui: Allow as few as 0 lines of diff context Johannes Sixt pointed out that dropping to 0 lines of context does allow the user to get more fine-grained hunk selection, especially since we don't currently support "highlight and apply (or revert)". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 01 June 2007, 03:32:54 UTC
8e29f90 Junio C Hamano 31 May 2007, 07:09:26 UTC Merge branch 'maint-1.5.1' into maint * maint-1.5.1: git-config: Improve documentation of git-config file handling git-config: Various small fixes to asciidoc documentation decode_85(): fix missing return. fix signed range problems with hex conversions 31 May 2007, 07:09:26 UTC
1701409 Frank Lichtenheld 31 May 2007, 00:35:37 UTC git-config: Improve documentation of git-config file handling The description which files git-config uses and how the various command line options and environment variables affect its behaviour was incomplete, outdated and confusing. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net> 31 May 2007, 06:56:37 UTC
90a36e5 Frank Lichtenheld 31 May 2007, 00:35:36 UTC git-config: Various small fixes to asciidoc documentation Add '' around the only mentioned commandline option that didn't have it. Make reference to section EXAMPLE a link and rename it to EXAMPLES because it actually contains a lot of examples. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net> 31 May 2007, 06:44:59 UTC
905d9c9 Shawn O. Pearce 30 May 2007, 15:27:49 UTC git-gui: Allow creating a branch when none exists If the user has no branches at all (their refs/heads/ is empty) and they are on a detached HEAD we have a valid repository but there are no branches to populate into the branch pulldown in the create branch dialog. Instead of erroring out we can skip that part of the dialog, much like we do with tracking branches or tags when the user doesn't have any. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> 30 May 2007, 23:34:40 UTC
86d14e1 Jerald Fitzjerald 30 May 2007, 12:39:58 UTC decode_85(): fix missing return. When the function detected an invalid base85 sequence, it issued an error message but forgot to return error status at that point and kept going. Signed-off-by: Jerald Fitzjerald <jfj@freemail.gr> Signed-off-by: Junio C Hamano <junkio@cox.net> 30 May 2007, 22:03:50 UTC
192a6be Linus Torvalds 30 May 2007, 17:32:19 UTC fix signed range problems with hex conversions Make hexval_table[] "const". Also make sure that the accessor function hexval() does not access the table with out-of-range values by declaring its parameter "unsigned char", instead of "unsigned int". With this, gcc can just generate: movzbl (%rdi), %eax movsbl hexval_table(%rax),%edx movzbl 1(%rdi), %eax movsbl hexval_table(%rax),%eax sall $4, %edx orl %eax, %edx for the code to generate a byte from two hex characters. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net> 30 May 2007, 22:01:37 UTC
back to top