Staging
v0.5.1
https://github.com/torvalds/linux
Revision a07e6ab41be179cf1ed728a4f41368435508b550 authored by K.Tanaka on 04 March 2008, 22:29:37 UTC, committed by Linus Torvalds on 05 March 2008, 00:35:18 UTC
This message describes another issue about md RAID10 found by testing the
2.6.24 md RAID10 using new scsi fault injection framework.

Abstract:

When a scsi error results in disabling a disk during RAID10 recovery, the
resync threads of md RAID10 could stall.

This case, the raid array has already been broken and it may not matter.  But
I think stall is not preferable.  If it occurs, even shutdown or reboot will
fail because of resource busy.

The deadlock mechanism:

The r10bio_s structure has a "remaining" member to keep track of BIOs yet to
be handled when recovering.  The "remaining" counter is incremented when
building a BIO in sync_request() and is decremented when finish a BIO in
end_sync_write().

If building a BIO fails for some reasons in sync_request(), the "remaining"
should be decremented if it has already been incremented.  I found a case
where this decrement is forgotten.  This causes a md_do_sync() deadlock
because md_do_sync() waits for md_done_sync() called by end_sync_write(), but
end_sync_write() never calls md_done_sync() because of the "remaining" counter
mismatch.

For example, this problem would be reproduced in the following case:

Personalities : [raid10]
md0 : active raid10 sdf1[4] sde1[5](F) sdd1[2] sdc1[1] sdb1[6](F)
      3919616 blocks 64K chunks 2 near-copies [4/2] [_UU_]
      [>....................]  recovery =  2.2% (45376/1959808) finish=0.7min speed=45376K/sec

This case, sdf1 is recovering, sdb1 and sde1 are disabled.
An additional error with detaching sdd will cause a deadlock.

md0 : active raid10 sdf1[4] sde1[5](F) sdd1[6](F) sdc1[1] sdb1[7](F)
      3919616 blocks 64K chunks 2 near-copies [4/1] [_U__]
      [=>...................]  recovery =  5.0% (99520/1959808) finish=5.9min speed=5237K/sec

 2739 ?        S<     0:17 [md0_raid10]
28608 ?        D<     0:00 [md0_resync]
28629 pts/1    Ss     0:00 bash
28830 pts/1    R+     0:00 ps ax
31819 ?        D<     0:00 [kjournald]

The resync thread keeps working, but actually it is deadlocked.

Patch:
By this patch, the remaining counter will be decremented if needed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 1c83053
History
Tip revision: a07e6ab41be179cf1ed728a4f41368435508b550 authored by K.Tanaka on 04 March 2008, 22:29:37 UTC
md: the md RAID10 resync thread could cause a md RAID10 array deadlock
Tip revision: a07e6ab
File Mode Size
Documentation
arch
block
crypto
drivers
fs
include
init
ipc
kernel
lib
mm
net
samples
scripts
security
sound
usr
virt
.gitignore -rw-r--r-- 644 bytes
.mailmap -rw-r--r-- 3.6 KB
COPYING -rw-r--r-- 18.3 KB
CREDITS -rw-r--r-- 90.4 KB
Kbuild -rw-r--r-- 1.6 KB
MAINTAINERS -rw-r--r-- 95.1 KB
Makefile -rw-r--r-- 52.8 KB
README -rw-r--r-- 16.5 KB
REPORTING-BUGS -rw-r--r-- 3.1 KB

README

back to top