Staging
v0.5.1
v0.5.1
https://github.com/torvalds/linux
Revision a0783cd0c810504427777e8aae20d5f4f8b652a0 authored by Corinna Vinschen on 19 November 2019, 09:09:39 UTC, committed by David S. Miller on 20 November 2019, 00:41:11 UTC
During performance testing, I found that one of my r8169 NICs suffered
a major performance loss, a 8168c model.
Running netperf's TCP_STREAM test didn't return the expected
throughput of > 900 Mb/s, but rather only about 22 Mb/s. Strange
enough, running the TCP_MAERTS and UDP_STREAM tests all returned with
throughput > 900 Mb/s, as did TCP_STREAM with the other r8169 NICs I can
test (either one of 8169s, 8168e, 8168f).
Bisecting turned up commit 93681cd7d94f83903cb3f0f95433d10c28a7e9a5,
"r8169: enable HW csum and TSO" as the culprit.
I added my 8168c version, RTL_GIGA_MAC_VER_22, to the code
special-casing the 8168evl as per the patch below. This fixed the
performance problem for me.
Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent c9d55b6
Tip revision: a0783cd0c810504427777e8aae20d5f4f8b652a0 authored by Corinna Vinschen on 19 November 2019, 09:09:39 UTC
r8169: disable TSO on a single version of RTL8168c to fix performance
r8169: disable TSO on a single version of RTL8168c to fix performance
Tip revision: a0783cd
Kconfig.hz
# SPDX-License-Identifier: GPL-2.0-only
#
# Timer Interrupt Frequency Configuration
#
choice
prompt "Timer frequency"
default HZ_250
help
Allows the configuration of the timer frequency. It is customary
to have the timer interrupt run at 1000 Hz but 100 Hz may be more
beneficial for servers and NUMA systems that do not need to have
a fast response for user interaction and that may experience bus
contention and cacheline bounces as a result of timer interrupts.
Note that the timer interrupt occurs on each processor in an SMP
environment leading to NR_CPUS * HZ number of timer interrupts
per second.
config HZ_100
bool "100 HZ"
help
100 Hz is a typical choice for servers, SMP and NUMA systems
with lots of processors that may show reduced performance if
too many timer interrupts are occurring.
config HZ_250
bool "250 HZ"
help
250 Hz is a good compromise choice allowing server performance
while also showing good interactive responsiveness even
on SMP and NUMA systems. If you are going to be using NTSC video
or multimedia, selected 300Hz instead.
config HZ_300
bool "300 HZ"
help
300 Hz is a good compromise choice allowing server performance
while also showing good interactive responsiveness even
on SMP and NUMA systems and exactly dividing by both PAL and
NTSC frame rates for video and multimedia work.
config HZ_1000
bool "1000 HZ"
help
1000 Hz is the preferred choice for desktop systems and other
systems requiring fast interactive responses to events.
endchoice
config HZ
int
default 100 if HZ_100
default 250 if HZ_250
default 300 if HZ_300
default 1000 if HZ_1000
config SCHED_HRTICK
def_bool HIGH_RES_TIMERS
Computing file changes ...
