Staging
v0.5.1
v0.5.1
https://github.com/python/cpython
Revision 12c6bda4f0e96c4bea285d8c664044753ea81bf1 authored by Brett Cannon on 24 August 2012, 22:25:59 UTC, committed by Brett Cannon on 24 August 2012, 22:25:59 UTC
fromlist of __import__ propagate. The problem previously was that if something listed in fromlist didn't exist then that's okay. The fix for that was too broad in terms of catching ImportError. The trick with the solution to this issue is that the proper refactoring of import thanks to importlib doesn't allow for a way to distinguish (portably) between an ImportError because finders couldn't find a loader, or a loader raised the exception. In Python 3.4 the hope is to introduce a new exception (e.g. ModuleNotFound) to make it clean to differentiate why ImportError was raised.
1 parent 7a54d16
Tip revision: 12c6bda4f0e96c4bea285d8c664044753ea81bf1 authored by Brett Cannon on 24 August 2012, 22:25:59 UTC
Issue #15316: Let exceptions raised during imports triggered by the
Issue #15316: Let exceptions raised during imports triggered by the
Tip revision: 12c6bda
Makefile.pre.in
# Top-level Makefile for Python
#
# As distributed, this file is called Makefile.pre.in; it is processed
# into the real Makefile by running the script ./configure, which
# replaces things like @spam@ with values appropriate for your system.
# This means that if you edit Makefile, your changes get lost the next
# time you run the configure script. Ideally, you can do:
#
# ./configure
# make
# make test
# make install
#
# If you have a previous version of Python installed that you don't
# want to overwrite, you can use "make altinstall" instead of "make
# install". Refer to the "Installing" section in the README file for
# additional details.
#
# See also the section "Build instructions" in the README file.
# === Variables set by makesetup ===
MODOBJS= _MODOBJS_
MODLIBS= _MODLIBS_
# === Variables set by configure
VERSION= @VERSION@
srcdir= @srcdir@
VPATH= @srcdir@
CC= @CC@
CXX= @CXX@
MAINCC= @MAINCC@
LINKCC= @LINKCC@
AR= @AR@
RANLIB= @RANLIB@
READELF= @READELF@
SOABI= @SOABI@
LDVERSION= @LDVERSION@
HGVERSION= @HGVERSION@
HGTAG= @HGTAG@
HGBRANCH= @HGBRANCH@
GNULD= @GNULD@
# Shell used by make (some versions default to the login shell, which is bad)
SHELL= /bin/sh
# Use this to make a link between python$(VERSION) and python in $(BINDIR)
LN= @LN@
# Portable install script (configure doesn't always guess right)
INSTALL= @INSTALL@
INSTALL_PROGRAM=@INSTALL_PROGRAM@
INSTALL_SCRIPT= @INSTALL_SCRIPT@
INSTALL_DATA= @INSTALL_DATA@
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED= ${INSTALL} -m 555
MKDIR_P= @MKDIR_P@
MAKESETUP= $(srcdir)/Modules/makesetup
# Compiler options
OPT= @OPT@
BASECFLAGS= @BASECFLAGS@
CONFIGURE_CFLAGS= @CFLAGS@
CONFIGURE_CPPFLAGS= @CPPFLAGS@
CONFIGURE_LDFLAGS= @LDFLAGS@
# Avoid assigning CFLAGS, LDFLAGS, etc. so users can use them on the
# command line to append to these values without stomping the pre-set
# values.
PY_CFLAGS= $(BASECFLAGS) $(OPT) $(CONFIGURE_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)
# Both CPPFLAGS and LDFLAGS need to contain the shell's value for setup.py to
# be able to build extension modules using the directories specified in the
# environment variables
PY_CPPFLAGS= -I. -I$(srcdir)/Include $(CONFIGURE_CPPFLAGS) $(CPPFLAGS)
PY_LDFLAGS= $(CONFIGURE_LDFLAGS) $(LDFLAGS)
NO_AS_NEEDED= @NO_AS_NEEDED@
LDLAST= @LDLAST@
SGI_ABI= @SGI_ABI@
CCSHARED= @CCSHARED@
LINKFORSHARED= @LINKFORSHARED@
ARFLAGS= @ARFLAGS@
# Extra C flags added for building the interpreter object files.
CFLAGSFORSHARED=@CFLAGSFORSHARED@
# C flags used for building the interpreter object files
PY_CORE_CFLAGS= $(PY_CFLAGS) $(PY_CPPFLAGS) $(CFLAGSFORSHARED) -DPy_BUILD_CORE
# Machine-dependent subdirectories
MACHDEP= @MACHDEP@
# Install prefix for architecture-independent files
prefix= @prefix@
# Install prefix for architecture-dependent files
exec_prefix= @exec_prefix@
# Install prefix for data files
datarootdir= @datarootdir@
# Expanded directories
BINDIR= @bindir@
LIBDIR= @libdir@
MANDIR= @mandir@
INCLUDEDIR= @includedir@
CONFINCLUDEDIR= $(exec_prefix)/include
SCRIPTDIR= $(prefix)/lib
ABIFLAGS= @ABIFLAGS@
# Detailed destination directories
BINLIBDEST= $(LIBDIR)/python$(VERSION)
LIBDEST= $(SCRIPTDIR)/python$(VERSION)
INCLUDEPY= $(INCLUDEDIR)/python$(LDVERSION)
CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(LDVERSION)
# Symbols used for using shared libraries
SO= @SO@
LDSHARED= @LDSHARED@ $(PY_LDFLAGS)
BLDSHARED= @BLDSHARED@ $(PY_LDFLAGS)
LDCXXSHARED= @LDCXXSHARED@
DESTSHARED= $(BINLIBDEST)/lib-dynload
# Executable suffix (.exe on Windows and Mac OS X)
EXE= @EXEEXT@
BUILDEXE= @BUILDEXEEXT@
# Short name and location for Mac OS X Python framework
UNIVERSALSDK=@UNIVERSALSDK@
PYTHONFRAMEWORK= @PYTHONFRAMEWORK@
PYTHONFRAMEWORKDIR= @PYTHONFRAMEWORKDIR@
PYTHONFRAMEWORKPREFIX= @PYTHONFRAMEWORKPREFIX@
PYTHONFRAMEWORKINSTALLDIR= @PYTHONFRAMEWORKINSTALLDIR@
# Deployment target selected during configure, to be checked
# by distutils. The export statement is needed to ensure that the
# deployment target is active during build.
MACOSX_DEPLOYMENT_TARGET=@CONFIGURE_MACOSX_DEPLOYMENT_TARGET@
@EXPORT_MACOSX_DEPLOYMENT_TARGET@export MACOSX_DEPLOYMENT_TARGET
# Options to enable prebinding (for fast startup prior to Mac OS X 10.3)
OTHER_LIBTOOL_OPT=@OTHER_LIBTOOL_OPT@
# Environment to run shared python without installed libraries
RUNSHARED= @RUNSHARED@
# Modes for directories, executables and data files created by the
# install process. Default to user-only-writable for all file types.
DIRMODE= 755
EXEMODE= 755
FILEMODE= 644
# configure script arguments
CONFIG_ARGS= @CONFIG_ARGS@
# Subdirectories with code
SRCDIRS= @SRCDIRS@
# Other subdirectories
SUBDIRSTOO= Include Lib Misc
# Files and directories to be distributed
CONFIGFILES= configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in
DISTFILES= README ChangeLog $(CONFIGFILES)
DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
DIST= $(DISTFILES) $(DISTDIRS)
LIBRARY= @LIBRARY@
LDLIBRARY= @LDLIBRARY@
BLDLIBRARY= @BLDLIBRARY@
PY3LIBRARY= @PY3LIBRARY@
DLLLIBRARY= @DLLLIBRARY@
LDLIBRARYDIR= @LDLIBRARYDIR@
INSTSONAME= @INSTSONAME@
LIBS= @LIBS@
LIBM= @LIBM@
LIBC= @LIBC@
SYSLIBS= $(LIBM) $(LIBC)
SHLIBS= @SHLIBS@
THREADOBJ= @THREADOBJ@
DLINCLDIR= @DLINCLDIR@
DYNLOADFILE= @DYNLOADFILE@
MACHDEP_OBJS= @MACHDEP_OBJS@
LIBOBJDIR= Python/
LIBOBJS= @LIBOBJS@
PYTHON= python$(EXE)
BUILDPYTHON= python$(BUILDEXE)
PYTHON_FOR_BUILD=@PYTHON_FOR_BUILD@
_PYTHON_HOST_PLATFORM=@_PYTHON_HOST_PLATFORM@
HOST_GNU_TYPE= @host@
# The task to run while instrument when building the profile-opt target
PROFILE_TASK= $(srcdir)/Tools/pybench/pybench.py -n 2 --with-gc --with-syscheck
#PROFILE_TASK= $(srcdir)/Lib/test/regrtest.py
# === Definitions added by makesetup ===
##########################################################################
# Modules
MODULE_OBJS= \
Modules/config.o \
Modules/getpath.o \
Modules/main.o \
Modules/gcmodule.o
# Used of signalmodule.o is not available
SIGNAL_OBJS= @SIGNAL_OBJS@
IO_H= Modules/_io/_iomodule.h
IO_OBJS= \
Modules/_io/_iomodule.o \
Modules/_io/iobase.o \
Modules/_io/fileio.o \
Modules/_io/bufferedio.o \
Modules/_io/textio.o \
Modules/_io/bytesio.o \
Modules/_io/stringio.o
##########################################################################
# Grammar
GRAMMAR_H= $(srcdir)/Include/graminit.h
GRAMMAR_C= $(srcdir)/Python/graminit.c
GRAMMAR_INPUT= $(srcdir)/Grammar/Grammar
LIBFFI_INCLUDEDIR= @LIBFFI_INCLUDEDIR@
##########################################################################
# Parser
PGEN= Parser/pgen$(EXE)
PSRCS= \
Parser/acceler.c \
Parser/grammar1.c \
Parser/listnode.c \
Parser/node.c \
Parser/parser.c \
Parser/bitset.c \
Parser/metagrammar.c \
Parser/firstsets.c \
Parser/grammar.c \
Parser/pgen.c
POBJS= \
Parser/acceler.o \
Parser/grammar1.o \
Parser/listnode.o \
Parser/node.o \
Parser/parser.o \
Parser/bitset.o \
Parser/metagrammar.o \
Parser/firstsets.o \
Parser/grammar.o \
Parser/pgen.o
PARSER_OBJS= $(POBJS) Parser/myreadline.o Parser/parsetok.o Parser/tokenizer.o
PGSRCS= \
Objects/obmalloc.c \
Python/dynamic_annotations.c \
Python/mysnprintf.c \
Python/pyctype.c \
Parser/tokenizer_pgen.c \
Parser/printgrammar.c \
Parser/parsetok_pgen.c \
Parser/pgenmain.c
PGOBJS= \
Objects/obmalloc.o \
Python/dynamic_annotations.o \
Python/mysnprintf.o \
Python/pyctype.o \
Parser/tokenizer_pgen.o \
Parser/printgrammar.o \
Parser/parsetok_pgen.o \
Parser/pgenmain.o
PARSER_HEADERS= \
$(srcdir)/Parser/parser.h \
$(srcdir)/Include/parsetok.h \
$(srcdir)/Parser/tokenizer.h
PGENSRCS= $(PSRCS) $(PGSRCS)
PGENOBJS= $(POBJS) $(PGOBJS)
##########################################################################
# AST
AST_H_DIR= $(srcdir)/Include
AST_H= $(AST_H_DIR)/Python-ast.h
AST_C_DIR= $(srcdir)/Python
AST_C= $(AST_C_DIR)/Python-ast.c
AST_ASDL= $(srcdir)/Parser/Python.asdl
ASDLGEN_FILES= $(srcdir)/Parser/asdl.py $(srcdir)/Parser/asdl_c.py
# XXX Note that a build now requires Python exist before the build starts
ASDLGEN= @DISABLE_ASDLGEN@ $(srcdir)/Parser/asdl_c.py
##########################################################################
# Python
OPCODETARGETS_H= \
$(srcdir)/Python/opcode_targets.h
OPCODETARGETGEN= \
$(srcdir)/Python/makeopcodetargets.py
OPCODETARGETGEN_FILES= \
$(OPCODETARGETGEN) $(srcdir)/Lib/opcode.py
PYTHON_OBJS= \
Python/_warnings.o \
Python/Python-ast.o \
Python/asdl.o \
Python/ast.o \
Python/bltinmodule.o \
Python/ceval.o \
Python/compile.o \
Python/codecs.o \
Python/dynamic_annotations.o \
Python/errors.o \
Python/frozenmain.o \
Python/future.o \
Python/getargs.o \
Python/getcompiler.o \
Python/getcopyright.o \
Python/getplatform.o \
Python/getversion.o \
Python/graminit.o \
Python/import.o \
Python/importdl.o \
Python/marshal.o \
Python/modsupport.o \
Python/mystrtoul.o \
Python/mysnprintf.o \
Python/peephole.o \
Python/pyarena.o \
Python/pyctype.o \
Python/pyfpe.o \
Python/pymath.o \
Python/pystate.o \
Python/pythonrun.o \
Python/pytime.o \
Python/random.o \
Python/structmember.o \
Python/symtable.o \
Python/sysmodule.o \
Python/traceback.o \
Python/getopt.o \
Python/pystrcmp.o \
Python/pystrtod.o \
Python/dtoa.o \
Python/formatter_unicode.o \
Python/fileutils.o \
Python/$(DYNLOADFILE) \
$(LIBOBJS) \
$(MACHDEP_OBJS) \
$(THREADOBJ)
##########################################################################
# Objects
OBJECT_OBJS= \
Objects/abstract.o \
Objects/accu.o \
Objects/boolobject.o \
Objects/bytes_methods.o \
Objects/bytearrayobject.o \
Objects/bytesobject.o \
Objects/cellobject.o \
Objects/classobject.o \
Objects/codeobject.o \
Objects/complexobject.o \
Objects/descrobject.o \
Objects/enumobject.o \
Objects/exceptions.o \
Objects/genobject.o \
Objects/fileobject.o \
Objects/floatobject.o \
Objects/frameobject.o \
Objects/funcobject.o \
Objects/iterobject.o \
Objects/listobject.o \
Objects/longobject.o \
Objects/dictobject.o \
Objects/memoryobject.o \
Objects/methodobject.o \
Objects/moduleobject.o \
Objects/namespaceobject.o \
Objects/object.o \
Objects/obmalloc.o \
Objects/capsule.o \
Objects/rangeobject.o \
Objects/setobject.o \
Objects/sliceobject.o \
Objects/structseq.o \
Objects/tupleobject.o \
Objects/typeobject.o \
Objects/unicodeobject.o \
Objects/unicodectype.o \
Objects/weakrefobject.o
SYSCONFIGDATA=$(srcdir)/Lib/_sysconfigdata.py
##########################################################################
# objects that get linked into the Python library
LIBRARY_OBJS_OMIT_FROZEN= \
Modules/getbuildinfo.o \
$(PARSER_OBJS) \
$(OBJECT_OBJS) \
$(PYTHON_OBJS) \
$(MODULE_OBJS) \
$(SIGNAL_OBJS) \
$(MODOBJS)
LIBRARY_OBJS= \
$(LIBRARY_OBJS_OMIT_FROZEN) \
Python/frozen.o
#########################################################################
# Rules
# Default target
all: build_all
build_all: $(BUILDPYTHON) $(SYSCONFIGDATA) oldsharedmods sharedmods gdbhooks Modules/_testembed
# Compile a binary with gcc profile guided optimization.
profile-opt:
@echo "Building with support for profile generation:"
$(MAKE) clean
$(MAKE) build_all_generate_profile
@echo "Running benchmark to generate profile data:"
$(MAKE) profile-removal
$(MAKE) run_profile_task
@echo "Rebuilding with profile guided optimizations:"
$(MAKE) clean
$(MAKE) build_all_use_profile
build_all_generate_profile:
$(MAKE) all CFLAGS="$(CFLAGS) -fprofile-generate" LIBS="$(LIBS) -lgcov"
run_profile_task:
: # FIXME: can't run for a cross build
$(RUNSHARED) ./$(BUILDPYTHON) $(PROFILE_TASK)
build_all_use_profile:
$(MAKE) all CFLAGS="$(CFLAGS) -fprofile-use -fprofile-correction"
coverage:
@echo "Building with support for coverage checking:"
$(MAKE) clean
$(MAKE) all CFLAGS="$(CFLAGS) -O0 -pg -fprofile-arcs -ftest-coverage" LIBS="$(LIBS) -lgcov"
# Build the interpreter
$(BUILDPYTHON): Modules/python.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)
$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
platform: $(BUILDPYTHON) $(SYSCONFIGDATA)
$(RUNSHARED) $(PYTHON_FOR_BUILD) -c 'import sys ; from sysconfig import get_platform ; print(get_platform()+"-"+sys.version[0:3])' >platform
# Generate the sysconfig build-time data
$(SYSCONFIGDATA): $(BUILDPYTHON)
$(RUNSHARED) $(PYTHON_FOR_BUILD) -S -m sysconfig --generate-posix-vars
# Build the shared modules
sharedmods: $(BUILDPYTHON) $(SYSCONFIGDATA)
case $$MAKEFLAGS in *s*) quiet=-q; esac; \
$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \
$(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build
# Build static library
# avoid long command lines, same as LIBRARY_OBJS
$(LIBRARY): $(LIBRARY_OBJS)
-rm -f $@
$(AR) $(ARFLAGS) $@ Modules/getbuildinfo.o
$(AR) $(ARFLAGS) $@ $(PARSER_OBJS)
$(AR) $(ARFLAGS) $@ $(OBJECT_OBJS)
$(AR) $(ARFLAGS) $@ $(PYTHON_OBJS) Python/frozen.o
$(AR) $(ARFLAGS) $@ $(MODULE_OBJS) $(SIGNAL_OBJS)
$(AR) $(ARFLAGS) $@ $(MODOBJS)
$(RANLIB) $@
libpython$(LDVERSION).so: $(LIBRARY_OBJS)
if test $(INSTSONAME) != $(LDLIBRARY); then \
$(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
$(LN) -f $(INSTSONAME) $@; \
else \
$(BLDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
fi
libpython3.so: libpython$(LDVERSION).so
$(BLDSHARED) $(NO_AS_NEEDED) -o $@ -Wl,-h$@ $^
libpython$(LDVERSION).dylib: $(LIBRARY_OBJS)
$(CC) -dynamiclib -Wl,-single_module $(PY_LDFLAGS) -undefined dynamic_lookup -Wl,-install_name,$(prefix)/lib/libpython$(LDVERSION).dylib -Wl,-compatibility_version,$(VERSION) -Wl,-current_version,$(VERSION) -o $@ $(LIBRARY_OBJS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \
libpython$(VERSION).sl: $(LIBRARY_OBJS)
$(LDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST)
# Copy up the gdb python hooks into a position where they can be automatically
# loaded by gdb during Lib/test/test_gdb.py
#
# Distributors are likely to want to install this somewhere else e.g. relative
# to the stripped DWARF data for the shared library.
gdbhooks: $(BUILDPYTHON)-gdb.py
SRC_GDB_HOOKS=$(srcdir)/Tools/gdb/libpython.py
$(BUILDPYTHON)-gdb.py: $(SRC_GDB_HOOKS)
$(INSTALL_DATA) $(SRC_GDB_HOOKS) $(BUILDPYTHON)-gdb.py
# This rule is here for OPENSTEP/Rhapsody/MacOSX. It builds a temporary
# minimal framework (not including the Lib directory and such) in the current
# directory.
RESSRCDIR=Mac/Resources/framework
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK): \
$(LIBRARY) \
$(RESSRCDIR)/Info.plist
$(INSTALL) -d -m $(DIRMODE) $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)
$(CC) -o $(LDLIBRARY) $(PY_LDFLAGS) -dynamiclib \
-all_load $(LIBRARY) -Wl,-single_module \
-install_name $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK) \
-compatibility_version $(VERSION) \
-current_version $(VERSION) \
-framework CoreFoundation $(LIBS);
$(INSTALL) -d -m $(DIRMODE) \
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/English.lproj
$(INSTALL_DATA) $(RESSRCDIR)/Info.plist \
$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/Info.plist
$(LN) -fsn $(VERSION) $(PYTHONFRAMEWORKDIR)/Versions/Current
$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(PYTHONFRAMEWORKDIR)/$(PYTHONFRAMEWORK)
$(LN) -fsn Versions/Current/Resources $(PYTHONFRAMEWORKDIR)/Resources
# This rule builds the Cygwin Python DLL and import library if configured
# for a shared core library; otherwise, this rule is a noop.
$(DLLLIBRARY) libpython$(VERSION).dll.a: $(LIBRARY_OBJS)
if test -n "$(DLLLIBRARY)"; then \
$(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \
$(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST); \
else true; \
fi
oldsharedmods: $(SHAREDMODS)
Makefile Modules/config.c: Makefile.pre \
$(srcdir)/Modules/config.c.in \
$(MAKESETUP) \
Modules/Setup.config \
Modules/Setup \
Modules/Setup.local
$(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \
-s Modules \
Modules/Setup.config \
Modules/Setup.local \
Modules/Setup
@mv config.c Modules
@echo "The Makefile was updated, you may need to re-run make."
Modules/Setup: $(srcdir)/Modules/Setup.dist
@if test -f Modules/Setup; then \
echo "-----------------------------------------------"; \
echo "Modules/Setup.dist is newer than Modules/Setup;"; \
echo "check to make sure you have all the updates you"; \
echo "need in your Modules/Setup file."; \
echo "Usually, copying Modules/Setup.dist to Modules/Setup will work."; \
echo "-----------------------------------------------"; \
fi
Modules/_testembed: Modules/_testembed.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)
$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
############################################################################
# Importlib
Modules/_freeze_importlib: Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN)
$(LINKCC) $(PY_LDFLAGS) -o $@ Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
Python/importlib.h: $(srcdir)/Lib/importlib/_bootstrap.py Modules/_freeze_importlib.c
$(MAKE) Modules/_freeze_importlib
./Modules/_freeze_importlib \
$(srcdir)/Lib/importlib/_bootstrap.py Python/importlib.h
############################################################################
# Special rules for object files
Modules/getbuildinfo.o: $(PARSER_OBJS) \
$(OBJECT_OBJS) \
$(PYTHON_OBJS) \
$(MODULE_OBJS) \
$(SIGNAL_OBJS) \
$(MODOBJS) \
$(srcdir)/Modules/getbuildinfo.c
$(CC) -c $(PY_CORE_CFLAGS) \
-DHGVERSION="\"`LC_ALL=C $(HGVERSION)`\"" \
-DHGTAG="\"`LC_ALL=C $(HGTAG)`\"" \
-DHGBRANCH="\"`LC_ALL=C $(HGBRANCH)`\"" \
-o $@ $(srcdir)/Modules/getbuildinfo.c
Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile
$(CC) -c $(PY_CORE_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \
-DPREFIX='"$(prefix)"' \
-DEXEC_PREFIX='"$(exec_prefix)"' \
-DVERSION='"$(VERSION)"' \
-DVPATH='"$(VPATH)"' \
-o $@ $(srcdir)/Modules/getpath.c
Modules/python.o: $(srcdir)/Modules/python.c
$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/python.c
Modules/_testembed.o: $(srcdir)/Modules/_testembed.c
$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/_testembed.c
Python/dynload_shlib.o: $(srcdir)/Python/dynload_shlib.c Makefile
$(CC) -c $(PY_CORE_CFLAGS) \
-DSOABI='"$(SOABI)"' \
-o $@ $(srcdir)/Python/dynload_shlib.c
Python/sysmodule.o: $(srcdir)/Python/sysmodule.c Makefile
$(CC) -c $(PY_CORE_CFLAGS) \
-DABIFLAGS='"$(ABIFLAGS)"' \
-o $@ $(srcdir)/Python/sysmodule.c
$(IO_OBJS): $(IO_H)
$(GRAMMAR_H): $(GRAMMAR_INPUT) $(PGENSRCS)
@$(MKDIR_P) Include
$(MAKE) $(PGEN)
$(PGEN) $(GRAMMAR_INPUT) $(GRAMMAR_H) $(GRAMMAR_C)
$(GRAMMAR_C): $(GRAMMAR_H) $(GRAMMAR_INPUT) $(PGENSRCS)
$(MAKE) $(GRAMMAR_H)
touch $(GRAMMAR_C)
$(PGEN): $(PGENOBJS)
$(CC) $(OPT) $(PY_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN)
Parser/grammar.o: $(srcdir)/Parser/grammar.c \
$(srcdir)/Include/token.h \
$(srcdir)/Include/grammar.h
Parser/metagrammar.o: $(srcdir)/Parser/metagrammar.c
Parser/tokenizer_pgen.o: $(srcdir)/Parser/tokenizer.c
Parser/parsetok_pgen.o: $(srcdir)/Parser/parsetok.c
Parser/printgrammar.o: $(srcdir)/Parser/printgrammar.c
Parser/pgenmain.o: $(srcdir)/Include/parsetok.h
$(AST_H): $(AST_ASDL) $(ASDLGEN_FILES)
$(ASDLGEN) -h $(AST_H_DIR) $(AST_ASDL)
$(AST_C): $(AST_H) $(AST_ASDL) $(ASDLGEN_FILES)
$(ASDLGEN) -c $(AST_C_DIR) $(AST_ASDL)
Python/compile.o Python/symtable.o Python/ast.o: $(GRAMMAR_H) $(AST_H)
Python/getplatform.o: $(srcdir)/Python/getplatform.c
$(CC) -c $(PY_CORE_CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c
Python/importdl.o: $(srcdir)/Python/importdl.c
$(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c
Objects/unicodectype.o: $(srcdir)/Objects/unicodectype.c \
$(srcdir)/Objects/unicodetype_db.h
BYTESTR_DEPS = \
$(srcdir)/Include/bytes_methods.h \
$(srcdir)/Objects/stringlib/count.h \
$(srcdir)/Objects/stringlib/ctype.h \
$(srcdir)/Objects/stringlib/eq.h \
$(srcdir)/Objects/stringlib/fastsearch.h \
$(srcdir)/Objects/stringlib/find.h \
$(srcdir)/Objects/stringlib/find_max_char.h \
$(srcdir)/Objects/stringlib/partition.h \
$(srcdir)/Objects/stringlib/split.h \
$(srcdir)/Objects/stringlib/stringdefs.h \
$(srcdir)/Objects/stringlib/transmogrify.h \
$(srcdir)/Objects/stringlib/unicodedefs.h \
$(srcdir)/Objects/stringlib/localeutil.h \
$(srcdir)/Objects/stringlib/undef.h
UNICODE_DEPS = $(BYTESTR_DEPS) \
$(srcdir)/Objects/stringlib/asciilib.h \
$(srcdir)/Objects/stringlib/codecs.h \
$(srcdir)/Objects/stringlib/ucs1lib.h \
$(srcdir)/Objects/stringlib/ucs2lib.h \
$(srcdir)/Objects/stringlib/ucs4lib.h \
$(srcdir)/Objects/stringlib/unicode_format.h \
$(srcdir)/Objects/stringlib/unicodedefs.h
Objects/bytesobject.o: $(srcdir)/Objects/bytesobject.c $(BYTESTR_DEPS)
Objects/bytearrayobject.o: $(srcdir)/Objects/bytearrayobject.c $(BYTESTR_DEPS)
Objects/unicodeobject.o: $(srcdir)/Objects/unicodeobject.c $(UNICODE_DEPS)
Objects/dictobject.o: $(srcdir)/Objects/stringlib/eq.h
Objects/setobject.o: $(srcdir)/Objects/stringlib/eq.h
$(OPCODETARGETS_H): $(OPCODETARGETGEN_FILES)
$(OPCODETARGETGEN) $(OPCODETARGETS_H)
Python/ceval.o: $(OPCODETARGETS_H) $(srcdir)/Python/ceval_gil.h
Python/formatter_unicode.o: $(srcdir)/Python/formatter_unicode.c \
$(BYTESTR_DEPS)
Python/frozen.o: $(srcdir)/Python/importlib.h
Objects/typeobject.o: $(srcdir)/Objects/typeslots.inc
$(srcdir)/Objects/typeslots.inc: $(srcdir)/Include/typeslots.h $(srcdir)/Objects/typeslots.py
$(PYTHON) $(srcdir)/Objects/typeslots.py < $(srcdir)/Include/typeslots.h > $(srcdir)/Objects/typeslots.inc
############################################################################
# Header files
PYTHON_HEADERS= \
$(srcdir)/Include/Python.h \
$(srcdir)/Include/abstract.h \
$(srcdir)/Include/accu.h \
$(srcdir)/Include/asdl.h \
$(srcdir)/Include/ast.h \
$(srcdir)/Include/bltinmodule.h \
$(srcdir)/Include/bitset.h \
$(srcdir)/Include/boolobject.h \
$(srcdir)/Include/bytes_methods.h \
$(srcdir)/Include/bytearrayobject.h \
$(srcdir)/Include/bytesobject.h \
$(srcdir)/Include/cellobject.h \
$(srcdir)/Include/ceval.h \
$(srcdir)/Include/classobject.h \
$(srcdir)/Include/code.h \
$(srcdir)/Include/codecs.h \
$(srcdir)/Include/compile.h \
$(srcdir)/Include/complexobject.h \
$(srcdir)/Include/descrobject.h \
$(srcdir)/Include/dictobject.h \
$(srcdir)/Include/dtoa.h \
$(srcdir)/Include/dynamic_annotations.h \
$(srcdir)/Include/enumobject.h \
$(srcdir)/Include/errcode.h \
$(srcdir)/Include/eval.h \
$(srcdir)/Include/fileobject.h \
$(srcdir)/Include/fileutils.h \
$(srcdir)/Include/floatobject.h \
$(srcdir)/Include/frameobject.h \
$(srcdir)/Include/funcobject.h \
$(srcdir)/Include/genobject.h \
$(srcdir)/Include/import.h \
$(srcdir)/Include/intrcheck.h \
$(srcdir)/Include/iterobject.h \
$(srcdir)/Include/listobject.h \
$(srcdir)/Include/longintrepr.h \
$(srcdir)/Include/longobject.h \
$(srcdir)/Include/marshal.h \
$(srcdir)/Include/memoryobject.h \
$(srcdir)/Include/metagrammar.h \
$(srcdir)/Include/methodobject.h \
$(srcdir)/Include/modsupport.h \
$(srcdir)/Include/moduleobject.h \
$(srcdir)/Include/namespaceobject.h \
$(srcdir)/Include/node.h \
$(srcdir)/Include/object.h \
$(srcdir)/Include/objimpl.h \
$(srcdir)/Include/opcode.h \
$(srcdir)/Include/osdefs.h \
$(srcdir)/Include/patchlevel.h \
$(srcdir)/Include/pgen.h \
$(srcdir)/Include/pgenheaders.h \
$(srcdir)/Include/pyarena.h \
$(srcdir)/Include/pyatomic.h \
$(srcdir)/Include/pycapsule.h \
$(srcdir)/Include/pyctype.h \
$(srcdir)/Include/pydebug.h \
$(srcdir)/Include/pyerrors.h \
$(srcdir)/Include/pyfpe.h \
$(srcdir)/Include/pymath.h \
$(srcdir)/Include/pygetopt.h \
$(srcdir)/Include/pymacro.h \
$(srcdir)/Include/pymem.h \
$(srcdir)/Include/pyport.h \
$(srcdir)/Include/pystate.h \
$(srcdir)/Include/pystrcmp.h \
$(srcdir)/Include/pystrtod.h \
$(srcdir)/Include/pythonrun.h \
$(srcdir)/Include/pythread.h \
$(srcdir)/Include/pytime.h \
$(srcdir)/Include/rangeobject.h \
$(srcdir)/Include/setobject.h \
$(srcdir)/Include/sliceobject.h \
$(srcdir)/Include/structmember.h \
$(srcdir)/Include/structseq.h \
$(srcdir)/Include/symtable.h \
$(srcdir)/Include/sysmodule.h \
$(srcdir)/Include/traceback.h \
$(srcdir)/Include/tupleobject.h \
$(srcdir)/Include/ucnhash.h \
$(srcdir)/Include/unicodeobject.h \
$(srcdir)/Include/warnings.h \
$(srcdir)/Include/weakrefobject.h \
pyconfig.h \
$(PARSER_HEADERS)
$(LIBRARY_OBJS) $(MODOBJS) Modules/python.o: $(PYTHON_HEADERS)
######################################################################
TESTOPTS= $(EXTRATESTOPTS)
TESTPYTHON= $(RUNSHARED) ./$(BUILDPYTHON) $(TESTPYTHONOPTS)
TESTRUNNER= $(TESTPYTHON) $(srcdir)/Tools/scripts/run_tests.py
TESTTIMEOUT= 3600
# Run a basic set of regression tests.
# This excludes some tests that are particularly resource-intensive.
test: all platform
$(TESTRUNNER) $(TESTOPTS)
# Run the full test suite twice - once without .pyc files, and once with.
# In the past, we've had problems where bugs in the marshalling or
# elsewhere caused bytecode read from .pyc files to behave differently
# than bytecode generated directly from a .py source file. Sometimes
# the bytecode read from a .pyc file had the bug, sometimes the directly
# generated bytecode. This is sometimes a very shy bug needing a lot of
# sample data.
testall: all platform
-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f
$(TESTPYTHON) -E $(srcdir)/Lib/compileall.py
-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f
-$(TESTRUNNER) -u all $(TESTOPTS)
$(TESTRUNNER) -u all $(TESTOPTS)
# Run the test suite for both architectures in a Universal build on OSX.
# Must be run on an Intel box.
testuniversal: all platform
if [ `arch` != 'i386' ];then \
echo "This can only be used on OSX/i386" ;\
exit 1 ;\
fi
$(TESTRUNNER) -u all $(TESTOPTS)
$(RUNSHARED) /usr/libexec/oah/translate \
./$(BUILDPYTHON) -E -m test -j 0 -u all $(TESTOPTS)
# Like testall, but with only one pass and without multiple processes.
# Run an optional script to include information about the build environment.
buildbottest: all platform
-@if which pybuildbot.identify >/dev/null 2>&1; then \
pybuildbot.identify "CC='$(CC)'" "CXX='$(CXX)'"; \
fi
$(TESTRUNNER) -j 1 -u all -W --timeout=$(TESTTIMEOUT) $(TESTOPTS)
QUICKTESTOPTS= $(TESTOPTS) -x test_subprocess test_io test_lib2to3 \
test_multibytecodec test_urllib2_localnet test_itertools \
test_multiprocessing test_mailbox test_socket test_poll \
test_select test_zipfile test_concurrent_futures
quicktest: all platform
$(TESTRUNNER) $(QUICKTESTOPTS)
install: altinstall bininstall
altinstall: @FRAMEWORKALTINSTALLFIRST@ altbininstall libinstall inclinstall libainstall \
sharedinstall oldsharedinstall maninstall @FRAMEWORKALTINSTALLLAST@
# Install shared libraries enabled by Setup
DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)
oldsharedinstall: $(DESTSHARED) $(SHAREDMODS)
@for i in X $(SHAREDMODS); do \
if test $$i != X; then \
echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \
$(INSTALL_SHARED) $$i $(DESTDIR)$(DESTSHARED)/`basename $$i`; \
fi; \
done
$(DESTSHARED):
@for i in $(DESTDIRS); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
# Install the interpreter with $(VERSION) affixed
# This goes into $(exec_prefix)
altbininstall: $(BUILDPYTHON)
@for i in $(BINDIR) $(LIBDIR); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
$(INSTALL_PROGRAM) $(BUILDPYTHON) $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE)
-if test "$(VERSION)" != "$(LDVERSION)"; then \
if test -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE) -o -h $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
then rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \
fi; \
(cd $(DESTDIR)$(BINDIR); $(LN) python$(LDVERSION)$(EXE) python$(VERSION)$(EXE)); \
fi
if test -f $(LDLIBRARY); then \
if test -n "$(DLLLIBRARY)" ; then \
$(INSTALL_SHARED) $(DLLLIBRARY) $(DESTDIR)$(BINDIR); \
else \
$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(LIBDIR)/$(INSTSONAME); \
if test $(LDLIBRARY) != $(INSTSONAME); then \
(cd $(DESTDIR)$(LIBDIR); $(LN) -sf $(INSTSONAME) $(LDLIBRARY)) \
fi \
fi; \
if test -n "$(PY3LIBRARY)"; then \
$(INSTALL_SHARED) $(PY3LIBRARY) $(DESTDIR)$(LIBDIR)/$(PY3LIBRARY); \
fi; \
else true; \
fi
bininstall: altbininstall
-if test -f $(DESTDIR)$(BINDIR)/python3$(EXE) -o -h $(DESTDIR)$(BINDIR)/python3$(EXE); \
then rm -f $(DESTDIR)$(BINDIR)/python3$(EXE); \
else true; \
fi
(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)$(EXE) python3$(EXE))
-if test "$(VERSION)" != "$(LDVERSION)"; then \
rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)-config; \
(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(LDVERSION)-config python$(VERSION)-config); \
rm -f $(DESTDIR)$(LIBPC)/python-$(LDVERSION).pc; \
(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python-$(LDVERSION).pc); \
fi
-rm -f $(DESTDIR)$(BINDIR)/python3-config
(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-config python3-config)
-rm -f $(DESTDIR)$(LIBPC)/python3.pc
(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc)
-rm -f $(DESTDIR)$(BINDIR)/idle3
(cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3)
-rm -f $(DESTDIR)$(BINDIR)/pydoc3
(cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3)
-rm -f $(DESTDIR)$(BINDIR)/2to3
(cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3)
-rm -f $(DESTDIR)$(BINDIR)/pyvenv
(cd $(DESTDIR)$(BINDIR); $(LN) -s pyvenv-$(VERSION) pyvenv)
# Install the manual page
maninstall:
@for i in $(MANDIR) $(MANDIR)/man1; \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
$(INSTALL_DATA) $(srcdir)/Misc/python.man \
$(DESTDIR)$(MANDIR)/man1/python$(VERSION).1
# Install the library
PLATDIR= plat-$(MACHDEP)
EXTRAPLATDIR= @EXTRAPLATDIR@
MACHDEPS= $(PLATDIR) $(EXTRAPLATDIR)
XMLLIBSUBDIRS= xml xml/dom xml/etree xml/parsers xml/sax
LIBSUBDIRS= tkinter tkinter/test tkinter/test/test_tkinter \
tkinter/test/test_ttk site-packages test \
test/capath test/data \
test/cjkencodings test/decimaltestdata test/xmltestdata \
test/subprocessdata test/sndhdrdata \
test/tracedmodules test/encoded_modules \
test/namespace_pkgs \
test/namespace_pkgs/both_portions \
test/namespace_pkgs/both_portions/foo \
test/namespace_pkgs/not_a_namespace_pkg \
test/namespace_pkgs/not_a_namespace_pkg/foo \
test/namespace_pkgs/portion1 \
test/namespace_pkgs/portion1/foo \
test/namespace_pkgs/portion2 \
test/namespace_pkgs/portion2/foo \
test/namespace_pkgs/project1 \
test/namespace_pkgs/project1/parent \
test/namespace_pkgs/project1/parent/child \
test/namespace_pkgs/project2 \
test/namespace_pkgs/project2/parent \
test/namespace_pkgs/project2/parent/child \
test/namespace_pkgs/project3 \
test/namespace_pkgs/project3/parent \
test/namespace_pkgs/project3/parent/child \
test/namespace_pkgs/module_and_namespace_package \
test/namespace_pkgs/module_and_namespace_package/a_test \
collections concurrent concurrent/futures encodings \
email email/mime test/test_email test/test_email/data \
html json test/json_tests http dbm xmlrpc \
sqlite3 sqlite3/test \
logging csv wsgiref urllib \
lib2to3 lib2to3/fixes lib2to3/pgen2 lib2to3/tests \
lib2to3/tests/data lib2to3/tests/data/fixers \
lib2to3/tests/data/fixers/myfixes \
ctypes ctypes/test ctypes/macholib idlelib idlelib/Icons \
distutils distutils/command distutils/tests $(XMLLIBSUBDIRS) \
importlib test/test_importlib test/test_importlib/builtin \
test/test_importlib/extension test/test_importlib/frozen \
test/test_importlib/import_ test/test_importlib/source \
turtledemo \
multiprocessing multiprocessing/dummy \
unittest unittest/test unittest/test/testmock \
venv venv/scripts venv/scripts/posix \
curses pydoc_data $(MACHDEPS)
libinstall: build_all $(srcdir)/Lib/$(PLATDIR) $(srcdir)/Modules/xxmodule.c
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi -c "import lib2to3.pygram, lib2to3.patcomp;lib2to3.patcomp.PatternCompiler()"
@for i in $(SCRIPTDIR) $(LIBDEST); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
@for d in $(LIBSUBDIRS); \
do \
a=$(srcdir)/Lib/$$d; \
if test ! -d $$a; then continue; else true; fi; \
b=$(LIBDEST)/$$d; \
if test ! -d $(DESTDIR)$$b; then \
echo "Creating directory $$b"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$b; \
else true; \
fi; \
done
@for i in $(srcdir)/Lib/*.py ; \
do \
if test -x $$i; then \
$(INSTALL_SCRIPT) $$i $(DESTDIR)$(LIBDEST); \
echo $(INSTALL_SCRIPT) $$i $(LIBDEST); \
else \
$(INSTALL_DATA) $$i $(DESTDIR)$(LIBDEST); \
echo $(INSTALL_DATA) $$i $(LIBDEST); \
fi; \
done
@for d in $(LIBSUBDIRS); \
do \
a=$(srcdir)/Lib/$$d; \
if test ! -d $$a; then continue; else true; fi; \
if test `ls $$a | wc -l` -lt 1; then continue; fi; \
b=$(LIBDEST)/$$d; \
for i in $$a/*; \
do \
case $$i in \
*CVS) ;; \
*.py[co]) ;; \
*.orig) ;; \
*~) ;; \
*) \
if test -d $$i; then continue; fi; \
if test -x $$i; then \
echo $(INSTALL_SCRIPT) $$i $$b; \
$(INSTALL_SCRIPT) $$i $(DESTDIR)$$b; \
else \
echo $(INSTALL_DATA) $$i $$b; \
$(INSTALL_DATA) $$i $(DESTDIR)$$b; \
fi;; \
esac; \
done; \
done
$(INSTALL_DATA) $(srcdir)/LICENSE $(DESTDIR)$(LIBDEST)/LICENSE.txt
if test -d $(DESTDIR)$(LIBDEST)/distutils/tests; then \
$(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \
$(DESTDIR)$(LIBDEST)/distutils/tests ; \
fi
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST) -f \
-x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \
$(DESTDIR)$(LIBDEST)
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST) -f \
-x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \
$(DESTDIR)$(LIBDEST)
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST)/site-packages -f \
-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
-PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) -Wi -O $(DESTDIR)$(LIBDEST)/compileall.py \
-d $(LIBDEST)/site-packages -f \
-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
# Create the PLATDIR source directory, if one wasn't distributed..
$(srcdir)/Lib/$(PLATDIR):
mkdir $(srcdir)/Lib/$(PLATDIR)
cp $(srcdir)/Lib/plat-generic/regen $(srcdir)/Lib/$(PLATDIR)/regen
export PATH; PATH="`pwd`:$$PATH"; \
export PYTHONPATH; PYTHONPATH="`pwd`/Lib"; \
export DYLD_FRAMEWORK_PATH; DYLD_FRAMEWORK_PATH="`pwd`"; \
export EXE; EXE="$(BUILDEXE)"; \
cd $(srcdir)/Lib/$(PLATDIR); $(RUNSHARED) ./regen
python-config: $(srcdir)/Misc/python-config.in
# Substitution happens here, as the completely-expanded BINDIR
# is not available in configure
sed -e "s,@EXENAME@,$(BINDIR)/python$(LDVERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config
# Install the include files
INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
inclinstall:
@for i in $(INCLDIRSTOMAKE); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
@for i in $(srcdir)/Include/*.h; \
do \
echo $(INSTALL_DATA) $$i $(INCLUDEPY); \
$(INSTALL_DATA) $$i $(DESTDIR)$(INCLUDEPY); \
done
$(INSTALL_DATA) pyconfig.h $(DESTDIR)$(CONFINCLUDEPY)/pyconfig.h
# Install the library and miscellaneous stuff needed for extending/embedding
# This goes into $(exec_prefix)
LIBPL= $(LIBDEST)/config-$(LDVERSION)
# pkgconfig directory
LIBPC= $(LIBDIR)/pkgconfig
libainstall: all python-config
@for i in $(LIBDIR) $(LIBPL) $(LIBPC); \
do \
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
@if test -d $(LIBRARY); then :; else \
if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
if test "$(SO)" = .dll; then \
$(INSTALL_DATA) $(LDLIBRARY) $(DESTDIR)$(LIBPL) ; \
else \
$(INSTALL_DATA) $(LIBRARY) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
$(RANLIB) $(DESTDIR)$(LIBPL)/$(LIBRARY) ; \
fi; \
else \
echo Skip install of $(LIBRARY) - use make frameworkinstall; \
fi; \
fi
$(INSTALL_DATA) Modules/config.c $(DESTDIR)$(LIBPL)/config.c
$(INSTALL_DATA) Modules/python.o $(DESTDIR)$(LIBPL)/python.o
$(INSTALL_DATA) $(srcdir)/Modules/config.c.in $(DESTDIR)$(LIBPL)/config.c.in
$(INSTALL_DATA) Makefile $(DESTDIR)$(LIBPL)/Makefile
$(INSTALL_DATA) Modules/Setup $(DESTDIR)$(LIBPL)/Setup
$(INSTALL_DATA) Modules/Setup.local $(DESTDIR)$(LIBPL)/Setup.local
$(INSTALL_DATA) Modules/Setup.config $(DESTDIR)$(LIBPL)/Setup.config
$(INSTALL_DATA) Misc/python.pc $(DESTDIR)$(LIBPC)/python-$(VERSION).pc
$(INSTALL_SCRIPT) $(srcdir)/Modules/makesetup $(DESTDIR)$(LIBPL)/makesetup
$(INSTALL_SCRIPT) $(srcdir)/install-sh $(DESTDIR)$(LIBPL)/install-sh
$(INSTALL_SCRIPT) python-config $(DESTDIR)$(BINDIR)/python$(LDVERSION)-config
rm python-config
@if [ -s Modules/python.exp -a \
"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
echo; echo "Installing support files for building shared extension modules on AIX:"; \
$(INSTALL_DATA) Modules/python.exp \
$(DESTDIR)$(LIBPL)/python.exp; \
echo; echo "$(LIBPL)/python.exp"; \
$(INSTALL_SCRIPT) $(srcdir)/Modules/makexp_aix \
$(DESTDIR)$(LIBPL)/makexp_aix; \
echo "$(LIBPL)/makexp_aix"; \
$(INSTALL_SCRIPT) $(srcdir)/Modules/ld_so_aix \
$(DESTDIR)$(LIBPL)/ld_so_aix; \
echo "$(LIBPL)/ld_so_aix"; \
echo; echo "See Misc/AIX-NOTES for details."; \
else true; \
fi
# Install the dynamically loadable modules
# This goes into $(exec_prefix)
sharedinstall: sharedmods
$(RUNSHARED) $(PYTHON_FOR_BUILD) $(srcdir)/setup.py install \
--prefix=$(prefix) \
--install-scripts=$(BINDIR) \
--install-platlib=$(DESTSHARED) \
--root=$(DESTDIR)/
# Here are a couple of targets for MacOSX again, to install a full
# framework-based Python. frameworkinstall installs everything, the
# subtargets install specific parts. Much of the actual work is offloaded to
# the Makefile in Mac
#
#
# This target is here for backward compatiblity, previous versions of Python
# hadn't integrated framework installation in the normal install process.
frameworkinstall: install
# On install, we re-make the framework
# structure in the install location, /Library/Frameworks/ or the argument to
# --enable-framework. If --enable-framework has been specified then we have
# automatically set prefix to the location deep down in the framework, so we
# only have to cater for the structural bits of the framework.
frameworkinstallframework: frameworkinstallstructure install frameworkinstallmaclib
frameworkinstallstructure: $(LDLIBRARY)
@if test "$(PYTHONFRAMEWORKDIR)" = no-framework; then \
echo Not configured with --enable-framework; \
exit 1; \
else true; \
fi
@for i in $(prefix)/Resources/English.lproj $(prefix)/lib; do\
if test ! -d $(DESTDIR)$$i; then \
echo "Creating directory $(DESTDIR)$$i"; \
$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \
else true; \
fi; \
done
$(LN) -fsn include/python$(LDVERSION) $(DESTDIR)$(prefix)/Headers
sed 's/%VERSION%/'"`$(RUNSHARED) ./$(BUILDPYTHON) -c 'import platform; print(platform.python_version())'`"'/g' < $(RESSRCDIR)/Info.plist > $(DESTDIR)$(prefix)/Resources/Info.plist
$(LN) -fsn $(VERSION) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/Current
$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/$(PYTHONFRAMEWORK)
$(LN) -fsn Versions/Current/Headers $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Headers
$(LN) -fsn Versions/Current/Resources $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Resources
$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(PYTHONFRAMEWORKPREFIX)/$(LDLIBRARY)
# This installs Mac/Lib into the framework
# Install a number of symlinks to keep software that expects a normal unix
# install (which includes python-config) happy.
frameworkinstallmaclib:
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(LDVERSION).a"
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(LDVERSION).dylib"
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).a"
ln -fs "../../../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/python$(VERSION)/config-$(LDVERSION)/libpython$(VERSION).dylib"
ln -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(LDVERSION).dylib"
ln -fs "../$(PYTHONFRAMEWORK)" "$(DESTDIR)$(prefix)/lib/libpython$(VERSION).dylib"
# This installs the IDE, the Launcher and other apps into /Applications
frameworkinstallapps:
cd Mac && $(MAKE) installapps DESTDIR="$(DESTDIR)"
# This install the unix python and pythonw tools in /usr/local/bin
frameworkinstallunixtools:
cd Mac && $(MAKE) installunixtools DESTDIR="$(DESTDIR)"
frameworkaltinstallunixtools:
cd Mac && $(MAKE) altinstallunixtools DESTDIR="$(DESTDIR)"
# This installs the Tools into the applications directory.
# It is not part of a normal frameworkinstall
frameworkinstallextras:
cd Mac && $(MAKE) installextras DESTDIR="$(DESTDIR)"
# This installs a few of the useful scripts in Tools/scripts
scriptsinstall:
SRCDIR=$(srcdir) $(RUNSHARED) \
$(PYTHON_FOR_BUILD) $(srcdir)/Tools/scripts/setup.py install \
--prefix=$(prefix) \
--install-scripts=$(BINDIR) \
--root=$(DESTDIR)/
# Build the toplevel Makefile
Makefile.pre: $(srcdir)/Makefile.pre.in config.status
CONFIG_FILES=Makefile.pre CONFIG_HEADERS= $(SHELL) config.status
$(MAKE) -f Makefile.pre Makefile
# Run the configure script.
config.status: $(srcdir)/configure
$(SHELL) $(srcdir)/configure $(CONFIG_ARGS)
.PRECIOUS: config.status $(BUILDPYTHON) Makefile Makefile.pre
# Some make's put the object file in the current directory
.c.o:
$(CC) -c $(PY_CORE_CFLAGS) -o $@ $<
# Run reindent on the library
reindent:
./$(BUILDPYTHON) $(srcdir)/Tools/scripts/reindent.py -r $(srcdir)/Lib
# Rerun configure with the same options as it was run last time,
# provided the config.status script exists
recheck:
$(SHELL) config.status --recheck
$(SHELL) config.status
# Rebuild the configure script from configure.ac; also rebuild pyconfig.h.in
autoconf:
(cd $(srcdir); autoconf -Wall)
(cd $(srcdir); autoheader -Wall)
# Create a tags file for vi
tags::
cd $(srcdir); \
ctags -w -t Include/*.h; \
for i in $(SRCDIRS); do ctags -w -t -a $$i/*.[ch]; \
done; \
sort -o tags tags
# Create a tags file for GNU Emacs
TAGS::
cd $(srcdir); \
etags Include/*.h; \
for i in $(SRCDIRS); do etags -a $$i/*.[ch]; done
# Touch generated files
touch:
hg --config extensions.touch=Tools/hg/hgtouch.py touch -v
# Sanitation targets -- clean leaves libraries, executables and tags
# files, which clobber removes as well
pycremoval:
-find $(srcdir) -depth -name '__pycache__' -exec rm -rf {} ';'
-find $(srcdir) -name '*.py[co]' -exec rm -f {} ';'
rmtestturds:
-rm -f *BAD *GOOD *SKIPPED
-rm -rf OUT
-rm -f *.TXT
-rm -f *.txt
-rm -f gb-18030-2000.xml
docclean:
-rm -rf Doc/build
-rm -rf Doc/tools/sphinx Doc/tools/pygments Doc/tools/docutils
clean: pycremoval
find . -name '*.[oa]' -exec rm -f {} ';'
find . -name '*.s[ol]' -exec rm -f {} ';'
find . -name '*.so.[0-9]*.[0-9]*' -exec rm -f {} ';'
find build -name 'fficonfig.h' -exec rm -f {} ';' || true
find build -name 'fficonfig.py' -exec rm -f {} ';' || true
-rm -f $(srcdir)/Lib/lib2to3/*Grammar*.pickle
-rm -f $(SYSCONFIGDATA)
-rm -f Modules/_testembed Modules/_freeze_importlib
profile-removal:
find . -name '*.gc??' -exec rm -f {} ';'
clobber: clean profile-removal
-rm -f $(BUILDPYTHON) $(PGEN) $(LIBRARY) $(LDLIBRARY) $(DLLLIBRARY) \
tags TAGS \
config.cache config.log pyconfig.h Modules/config.c
-rm -rf build platform
-rm -rf $(PYTHONFRAMEWORKDIR)
# Make things extra clean, before making a distribution:
# remove all generated files, even Makefile[.pre]
# Keep configure and Python-ast.[ch], it's possible they can't be generated
distclean: clobber
for file in Lib/test/data/* ; do \
if test "$$file" != "Lib/test/data/README"; then rm "$$file"; fi; \
done
-rm -f core Makefile Makefile.pre config.status \
Modules/Setup Modules/Setup.local Modules/Setup.config \
Modules/ld_so_aix Modules/python.exp Misc/python.pc
-rm -f python*-gdb.py
-rm -f pybuilddir.txt
find $(srcdir) '(' -name '*.fdc' -o -name '*~' \
-o -name '[@,#]*' -o -name '*.old' \
-o -name '*.orig' -o -name '*.rej' \
-o -name '*.bak' ')' \
-exec rm -f {} ';'
# Check for smelly exported symbols (not starting with Py/_Py)
smelly: all
nm -p $(LIBRARY) | \
sed -n "/ [TDB] /s/.* //p" | grep -v "^_*Py" | sort -u; \
# Find files with funny names
funny:
find $(SUBDIRS) $(SUBDIRSTOO) \
-type d \
-o -name '*.[chs]' \
-o -name '*.py' \
-o -name '*.pyw' \
-o -name '*.dat' \
-o -name '*.el' \
-o -name '*.fd' \
-o -name '*.in' \
-o -name '*.gif' \
-o -name '*.txt' \
-o -name '*.xml' \
-o -name '*.xbm' \
-o -name '*.xpm' \
-o -name '*.uue' \
-o -name '*.decTest' \
-o -name '*.tmCommand' \
-o -name '*.tmSnippet' \
-o -name 'Setup' \
-o -name 'Setup.*' \
-o -name regen \
-o -name README \
-o -name NEWS \
-o -name HISTORY \
-o -name Makefile \
-o -name ChangeLog \
-o -name .hgignore \
-o -name .bzrignore \
-o -name MANIFEST \
-o -print
# Perform some verification checks on any modified files.
patchcheck:
$(RUNSHARED) ./$(BUILDPYTHON) $(srcdir)/Tools/scripts/patchcheck.py
# Dependencies
Python/thread.o: @THREADHEADERS@
# Declare targets that aren't real files
.PHONY: all build_all sharedmods oldsharedmods test quicktest
.PHONY: install altinstall oldsharedinstall bininstall altbininstall
.PHONY: maninstall libinstall inclinstall libainstall sharedinstall
.PHONY: frameworkinstall frameworkinstallframework frameworkinstallstructure
.PHONY: frameworkinstallmaclib frameworkinstallapps frameworkinstallunixtools
.PHONY: frameworkaltinstallunixtools recheck autoconf clean clobber distclean
.PHONY: smelly funny patchcheck touch
.PHONY: gdbhooks
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
# Local Variables:
# mode: makefile
# End:
Computing file changes ...
