Staging
v0.5.1
v0.5.1
https://github.com/python/cpython
Revision 0c77a82c3d3342affd157f3693812c789a8d6ae1 authored by Georg Brandl on 10 June 2008, 16:37:50 UTC, committed by Georg Brandl on 10 June 2008, 16:37:50 UTC
svn+ssh://pythondev@svn.python.org/python/trunk ........ r63829 | mark.summerfield | 2008-05-31 15:05:34 +0200 (Sat, 31 May 2008) | 4 lines Added a note to [] that special forms & special chars lose their meaning and backrefs can't be used inside [] ........ r63830 | georg.brandl | 2008-05-31 16:40:09 +0200 (Sat, 31 May 2008) | 2 lines #3010: clarification about stdin/use_rawinput. ........ r63831 | georg.brandl | 2008-05-31 16:45:55 +0200 (Sat, 31 May 2008) | 2 lines #3005: add explaining sentence to easydialogs docs. ........ r63858 | georg.brandl | 2008-06-01 18:41:31 +0200 (Sun, 01 Jun 2008) | 2 lines Add plain text make target. ........ r63865 | georg.brandl | 2008-06-01 21:24:36 +0200 (Sun, 01 Jun 2008) | 2 lines Spaces vs. tabs. ........ r63879 | gregory.p.smith | 2008-06-02 00:57:47 +0200 (Mon, 02 Jun 2008) | 3 lines Make the _H #define's match the header file names. Fix comments to mention the correct type names. ........ r63882 | gregory.p.smith | 2008-06-02 01:48:47 +0200 (Mon, 02 Jun 2008) | 3 lines Adds a Thread.getIdent() method to provide the _get_ident() value for any given threading.Thread object. feature request issue 2871. ........ r63948 | alexandre.vassalotti | 2008-06-04 22:41:44 +0200 (Wed, 04 Jun 2008) | 2 lines Fixed complex.__getnewargs__() to not emit another complex object. ........ r63970 | andrew.kuchling | 2008-06-06 01:33:54 +0200 (Fri, 06 Jun 2008) | 1 line Document 'utc' parameter ........ r63971 | andrew.kuchling | 2008-06-06 01:35:31 +0200 (Fri, 06 Jun 2008) | 1 line Add various items ........ r63972 | andrew.kuchling | 2008-06-06 01:35:48 +0200 (Fri, 06 Jun 2008) | 1 line Grammar fix ........ r63976 | georg.brandl | 2008-06-06 09:34:50 +0200 (Fri, 06 Jun 2008) | 2 lines Markup fix. ........ r63989 | thomas.heller | 2008-06-06 20:42:11 +0200 (Fri, 06 Jun 2008) | 2 lines Add a reminder for the maintainer of whatsnew. ........ r64014 | georg.brandl | 2008-06-07 17:59:10 +0200 (Sat, 07 Jun 2008) | 3 lines Factor out docstring dedenting from inspect.getdoc() into inspect.cleandoc() to ease standalone use of the algorithm. ........ r64015 | georg.brandl | 2008-06-07 18:04:01 +0200 (Sat, 07 Jun 2008) | 2 lines Revert unwanted changes. ........ r64021 | georg.brandl | 2008-06-07 20:16:12 +0200 (Sat, 07 Jun 2008) | 2 lines X-ref to numbers module. ........ r64022 | georg.brandl | 2008-06-07 20:17:37 +0200 (Sat, 07 Jun 2008) | 3 lines Document the "st" API, to avoid confusion with the "new" AST. Add a note about using the new AST module. ........ r64063 | martin.v.loewis | 2008-06-10 07:03:35 +0200 (Tue, 10 Jun 2008) | 2 lines Add Gregor Lingl. ........ r64064 | georg.brandl | 2008-06-10 09:45:28 +0200 (Tue, 10 Jun 2008) | 2 lines Add the "ast" module, containing helpers to ease use of the "_ast" classes. ........ r64065 | raymond.hettinger | 2008-06-10 09:57:15 +0200 (Tue, 10 Jun 2008) | 1 line Add Arnaud for his efforts on multi-arg set operations. ........ r64067 | georg.brandl | 2008-06-10 14:46:39 +0200 (Tue, 10 Jun 2008) | 2 lines #2536: fix itertools.permutations and itertools.combinations docstrings. ........
1 parent 0312494
Tip revision: 0c77a82c3d3342affd157f3693812c789a8d6ae1 authored by Georg Brandl on 10 June 2008, 16:37:50 UTC
Merged revisions 63829-63831,63858,63865,63879,63882,63948,63970-63972,63976,63989,64014-64015,64021-64022,64063-64065,64067 via svnmerge from
Merged revisions 63829-63831,63858,63865,63879,63882,63948,63970-63972,63976,63989,64014-64015,64021-64022,64063-64065,64067 via svnmerge from
Tip revision: 0c77a82
install-sh
#!/bin/sh
#
# install - install a program, script, or datafile
#
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd=$cpprog
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "$0: no input file specified" >&2
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "$0: $src does not exist" >&2
exit 1
fi
if [ x"$dst" = x ]
then
echo "$0: no destination specified" >&2
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d "$dst" ]
then
dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp=$pathcomp$1
shift
if [ ! -d "$pathcomp" ] ;
then
$mkdirprog "$pathcomp"
else
:
fi
pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd "$dst" &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename "$dst"`
else
dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename "$dst"`
else
:
fi
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/#inst.$$#
rmtmp=$dstdir/#rm.$$#
# Trap to clean up temp files at exit.
trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location. We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons. In this case, the final cleanup
# might fail but the new file should still install successfully.
{
if [ -f "$dstdir/$dstfile" ]
then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
{
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit
}
Computing file changes ...