Staging
v0.5.2
v0.5.2
https://github.com/torvalds/linux
Tip revision: 9e82bf014195d6f0054982c463575cdce24292be authored by Linus Torvalds on 15 September 2014, 00:50:12 UTC
Linux 3.17-rc5
Linux 3.17-rc5
Tip revision: 9e82bf0
pxa2xx_ssp.h
/*
* pxa2xx_ssp.h
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This driver supports the following PXA CPU/SSP ports:-
*
* PXA250 SSP
* PXA255 SSP, NSSP
* PXA26x SSP, NSSP, ASSP
* PXA27x SSP1, SSP2, SSP3
* PXA3xx SSP1, SSP2, SSP3, SSP4
*/
#ifndef __LINUX_SSP_H
#define __LINUX_SSP_H
#include <linux/list.h>
#include <linux/io.h>
#include <linux/of.h>
/*
* SSP Serial Port Registers
* PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
* PXA255, PXA26x and PXA27x have extra ports, registers and bits.
*/
#define SSCR0 (0x00) /* SSP Control Register 0 */
#define SSCR1 (0x04) /* SSP Control Register 1 */
#define SSSR (0x08) /* SSP Status Register */
#define SSITR (0x0C) /* SSP Interrupt Test Register */
#define SSDR (0x10) /* SSP Data Write/Data Read Register */
#define SSTO (0x28) /* SSP Time Out Register */
#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
#define SSTSA (0x30) /* SSP Tx Timeslot Active */
#define SSRSA (0x34) /* SSP Rx Timeslot Active */
#define SSTSS (0x38) /* SSP Timeslot Status */
#define SSACD (0x3C) /* SSP Audio Clock Divider */
#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */
/* Common PXA2xx bits first */
#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
#define SSCR0_National (0x2 << 4) /* National Microwire */
#define SSCR0_ECS (1 << 6) /* External clock select */
#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */
/* PXA27x, PXA3xx */
#define SSCR0_EDSS (1 << 20) /* Extended data size select */
#define SSCR0_NCS (1 << 21) /* Network clock select */
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
#define SSCR0_ACS (1 << 30) /* Audio clock select */
#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
#define SSSR_BSY (1 << 4) /* SSP Busy */
#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
#ifdef CONFIG_ARCH_PXA
#define RX_THRESH_DFLT 8
#define TX_THRESH_DFLT 8
#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
#else
#define RX_THRESH_DFLT 2
#define TX_THRESH_DFLT 2
#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */
#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
#endif
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
#define SSSR_BCE (1 << 23) /* Bit Count Error */
#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
#define SSSR_EOC (1 << 20) /* End Of Chain */
#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
/* PXA3xx */
#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */
#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */
#define SSPSP_TIMING_MASK (0x7f8001f0)
#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
/* LPSS SSP */
#define SSITF 0x44 /* TX FIFO trigger level */
#define SSITF_TxLoThresh(x) (((x) - 1) << 8)
#define SSITF_TxHiThresh(x) ((x) - 1)
#define SSIRF 0x48 /* RX FIFO trigger level */
#define SSIRF_RxThresh(x) ((x) - 1)
enum pxa_ssp_type {
SSP_UNDEFINED = 0,
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
PXA3xx_SSP,
PXA168_SSP,
PXA910_SSP,
CE4100_SSP,
LPSS_SSP,
};
struct ssp_device {
struct platform_device *pdev;
struct list_head node;
struct clk *clk;
void __iomem *mmio_base;
unsigned long phys_base;
const char *label;
int port_id;
int type;
int use_count;
int irq;
int drcmr_rx;
int drcmr_tx;
struct device_node *of_node;
};
/**
* pxa_ssp_write_reg - Write to a SSP register
*
* @dev: SSP device to access
* @reg: Register to write to
* @val: Value to be written.
*/
static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
{
__raw_writel(val, dev->mmio_base + reg);
}
/**
* pxa_ssp_read_reg - Read from a SSP register
*
* @dev: SSP device to access
* @reg: Register to read from
*/
static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
{
return __raw_readl(dev->mmio_base + reg);
}
#if IS_ENABLED(CONFIG_PXA_SSP)
struct ssp_device *pxa_ssp_request(int port, const char *label);
void pxa_ssp_free(struct ssp_device *);
struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
const char *label);
#else
static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
{
return NULL;
}
static inline struct ssp_device *pxa_ssp_request_of(const struct device_node *n,
const char *name)
{
return NULL;
}
static inline void pxa_ssp_free(struct ssp_device *ssp) {}
#endif
#endif