Staging
v0.5.2
v0.5.2
https://github.com/torvalds/linux
Tip revision: c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1 authored by Linus Torvalds on 29 April 2013, 00:36:01 UTC
Linux 3.9
Linux 3.9
Tip revision: c1be5a5
hardirq.h
#ifndef LINUX_HARDIRQ_H
#define LINUX_HARDIRQ_H
#include <linux/preempt.h>
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <linux/vtime.h>
#include <asm/hardirq.h>
/*
* We put the hardirq and softirq counter into the preemption
* counter. The bitmask has the following meaning:
*
* - bits 0-7 are the preemption count (max preemption depth: 256)
* - bits 8-15 are the softirq count (max # of softirqs: 256)
*
* The hardirq count can in theory reach the same as NR_IRQS.
* In reality, the number of nested IRQS is limited to the stack
* size as well. For archs with over 1000 IRQS it is not practical
* to expect that they will all nest. We give a max of 10 bits for
* hardirq nesting. An arch may choose to give less than 10 bits.
* m68k expects it to be 8.
*
* - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
* - bit 26 is the NMI_MASK
* - bit 27 is the PREEMPT_ACTIVE flag
*
* PREEMPT_MASK: 0x000000ff
* SOFTIRQ_MASK: 0x0000ff00
* HARDIRQ_MASK: 0x03ff0000
* NMI_MASK: 0x04000000
*/
#define PREEMPT_BITS 8
#define SOFTIRQ_BITS 8
#define NMI_BITS 1
#define MAX_HARDIRQ_BITS 10
#ifndef HARDIRQ_BITS
# define HARDIRQ_BITS MAX_HARDIRQ_BITS
#endif
#if HARDIRQ_BITS > MAX_HARDIRQ_BITS
#error HARDIRQ_BITS too high!
#endif
#define PREEMPT_SHIFT 0
#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS)
#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS)
#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS)
#define __IRQ_MASK(x) ((1UL << (x))-1)
#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT)
#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT)
#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT)
#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
#define NMI_OFFSET (1UL << NMI_SHIFT)
#define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET)
#ifndef PREEMPT_ACTIVE
#define PREEMPT_ACTIVE_BITS 1
#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS)
#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
#endif
#if PREEMPT_ACTIVE < (1 << (NMI_SHIFT + NMI_BITS))
#error PREEMPT_ACTIVE is too low!
#endif
#define hardirq_count() (preempt_count() & HARDIRQ_MASK)
#define softirq_count() (preempt_count() & SOFTIRQ_MASK)
#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
| NMI_MASK))
/*
* Are we doing bottom half or hardware interrupt processing?
* Are we in a softirq context? Interrupt context?
* in_softirq - Are we currently processing softirq or have bh disabled?
* in_serving_softirq - Are we currently processing softirq?
*/
#define in_irq() (hardirq_count())
#define in_softirq() (softirq_count())
#define in_interrupt() (irq_count())
#define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET)
/*
* Are we in NMI context?
*/
#define in_nmi() (preempt_count() & NMI_MASK)
#if defined(CONFIG_PREEMPT_COUNT)
# define PREEMPT_CHECK_OFFSET 1
#else
# define PREEMPT_CHECK_OFFSET 0
#endif
/*
* Are we running in atomic context? WARNING: this macro cannot
* always detect atomic context; in particular, it cannot know about
* held spinlocks in non-preemptible kernels. Thus it should not be
* used in the general case to determine whether sleeping is possible.
* Do not use in_atomic() in driver code.
*/
#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
/*
* Check whether we were atomic before we did preempt_disable():
* (used by the scheduler, *after* releasing the kernel lock)
*/
#define in_atomic_preempt_off() \
((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
#ifdef CONFIG_PREEMPT_COUNT
# define preemptible() (preempt_count() == 0 && !irqs_disabled())
#else
# define preemptible() 0
#endif
#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
extern void synchronize_irq(unsigned int irq);
#else
# define synchronize_irq(irq) barrier()
#endif
#if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU)
static inline void rcu_nmi_enter(void)
{
}
static inline void rcu_nmi_exit(void)
{
}
#else
extern void rcu_nmi_enter(void);
extern void rcu_nmi_exit(void);
#endif
/*
* It is safe to do non-atomic ops on ->hardirq_context,
* because NMI handlers may not preempt and the ops are
* always balanced, so the interrupted value of ->hardirq_context
* will always be restored.
*/
#define __irq_enter() \
do { \
account_irq_enter_time(current); \
add_preempt_count(HARDIRQ_OFFSET); \
trace_hardirq_enter(); \
} while (0)
/*
* Enter irq context (on NO_HZ, update jiffies):
*/
extern void irq_enter(void);
/*
* Exit irq context without processing softirqs:
*/
#define __irq_exit() \
do { \
trace_hardirq_exit(); \
account_irq_exit_time(current); \
sub_preempt_count(HARDIRQ_OFFSET); \
} while (0)
/*
* Exit irq context and process softirqs if needed:
*/
extern void irq_exit(void);
#define nmi_enter() \
do { \
lockdep_off(); \
ftrace_nmi_enter(); \
BUG_ON(in_nmi()); \
add_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET); \
rcu_nmi_enter(); \
trace_hardirq_enter(); \
} while (0)
#define nmi_exit() \
do { \
trace_hardirq_exit(); \
rcu_nmi_exit(); \
BUG_ON(!in_nmi()); \
sub_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET); \
ftrace_nmi_exit(); \
lockdep_on(); \
} while (0)
#endif /* LINUX_HARDIRQ_H */