Staging
v0.6.0
v0.6.0
https://github.com/torvalds/linux
Tip revision: c65b99f046843d2455aa231747b5a07a999a9f3d authored by Linus Torvalds on 01 June 2015, 02:01:07 UTC
Linux 4.1-rc6
Linux 4.1-rc6
Tip revision: c65b99f
8250_early.c
/*
* Early serial console for 8250/16550 devices
*
* (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
* and on early_printk.c by Andi Kleen.
*
* This is for use before the serial driver has initialized, in
* particular, before the UARTs have been discovered and named.
* Instead of specifying the console device as, e.g., "ttyS0",
* we locate the device directly by its MMIO or I/O port address.
*
* The user can specify the device directly, e.g.,
* earlycon=uart8250,io,0x3f8,9600n8
* earlycon=uart8250,mmio,0xff5e0000,115200n8
* earlycon=uart8250,mmio32,0xff5e0000,115200n8
* or
* console=uart8250,io,0x3f8,9600n8
* console=uart8250,mmio,0xff5e0000,115200n8
* console=uart8250,mmio32,0xff5e0000,115200n8
*/
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/serial.h>
unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
{
switch (port->iotype) {
case UPIO_MEM:
return readb(port->membase + offset);
case UPIO_MEM32:
return readl(port->membase + (offset << 2));
case UPIO_MEM32BE:
return ioread32be(port->membase + (offset << 2));
case UPIO_PORT:
return inb(port->iobase + offset);
default:
return 0;
}
}
void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value)
{
switch (port->iotype) {
case UPIO_MEM:
writeb(value, port->membase + offset);
break;
case UPIO_MEM32:
writel(value, port->membase + (offset << 2));
break;
case UPIO_MEM32BE:
iowrite32be(value, port->membase + (offset << 2));
break;
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
}
}
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
static void __init wait_for_xmitr(struct uart_port *port)
{
unsigned int status;
for (;;) {
status = serial8250_early_in(port, UART_LSR);
if ((status & BOTH_EMPTY) == BOTH_EMPTY)
return;
cpu_relax();
}
}
static void __init serial_putc(struct uart_port *port, int c)
{
wait_for_xmitr(port);
serial8250_early_out(port, UART_TX, c);
}
static void __init early_serial8250_write(struct console *console,
const char *s, unsigned int count)
{
struct earlycon_device *device = console->data;
struct uart_port *port = &device->port;
unsigned int ier;
/* Save the IER and disable interrupts preserving the UUE bit */
ier = serial8250_early_in(port, UART_IER);
if (ier)
serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
uart_console_write(port, s, count, serial_putc);
/* Wait for transmitter to become empty and restore the IER */
wait_for_xmitr(port);
if (ier)
serial8250_early_out(port, UART_IER, ier);
}
static void __init init_port(struct earlycon_device *device)
{
struct uart_port *port = &device->port;
unsigned int divisor;
unsigned char c;
unsigned int ier;
serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */
ier = serial8250_early_in(port, UART_IER);
serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */
serial8250_early_out(port, UART_FCR, 0); /* no fifo */
serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */
divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
c = serial8250_early_in(port, UART_LCR);
serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
serial8250_early_out(port, UART_DLL, divisor & 0xff);
serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
static int __init early_serial8250_setup(struct earlycon_device *device,
const char *options)
{
if (!(device->port.membase || device->port.iobase))
return -ENODEV;
if (!device->baud) {
struct uart_port *port = &device->port;
unsigned int ier;
/* assume the device was initialized, only mask interrupts */
ier = serial8250_early_in(port, UART_IER);
serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
} else
init_port(device);
device->con->write = early_serial8250_write;
return 0;
}
EARLYCON_DECLARE(uart8250, early_serial8250_setup);
EARLYCON_DECLARE(uart, early_serial8250_setup);