Staging
v0.6.0
v0.6.0
https://github.com/torvalds/linux
Tip revision: 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7 authored by Linus Torvalds on 01 February 2013, 01:08:14 UTC
Linux 3.8-rc6
Linux 3.8-rc6
Tip revision: 88b62b9
8250_dw.c
/*
* Synopsys DesignWare 8250 driver.
*
* Copyright 2011 Picochip, Jamie Iles.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
* LCR is written whilst busy. If it is, then a busy detect interrupt is
* raised, the LCR needs to be rewritten and the uart status register read.
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
struct dw8250_data {
int last_lcr;
int line;
};
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
if (offset == UART_LCR)
d->last_lcr = value;
offset <<= p->regshift;
writeb(value, p->membase + offset);
}
static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
{
offset <<= p->regshift;
return readb(p->membase + offset);
}
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
if (offset == UART_LCR)
d->last_lcr = value;
offset <<= p->regshift;
writel(value, p->membase + offset);
}
static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
{
offset <<= p->regshift;
return readl(p->membase + offset);
}
/* Offset for the DesignWare's UART Status Register. */
#define UART_USR 0x1f
static int dw8250_handle_irq(struct uart_port *p)
{
struct dw8250_data *d = p->private_data;
unsigned int iir = p->serial_in(p, UART_IIR);
if (serial8250_handle_irq(p, iir)) {
return 1;
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* Clear the USR and write the LCR again. */
(void)p->serial_in(p, UART_USR);
p->serial_out(p, UART_LCR, d->last_lcr);
return 1;
}
return 0;
}
static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct device_node *np = pdev->dev.of_node;
u32 val;
struct dw8250_data *data;
if (!regs || !irq) {
dev_err(&pdev->dev, "no registers/irq defined\n");
return -EINVAL;
}
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
uart.port.private_data = data;
spin_lock_init(&uart.port.lock);
uart.port.mapbase = regs->start;
uart.port.irq = irq->start;
uart.port.handle_irq = dw8250_handle_irq;
uart.port.type = PORT_8250;
uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.port.dev = &pdev->dev;
uart.port.iotype = UPIO_MEM;
uart.port.serial_in = dw8250_serial_in;
uart.port.serial_out = dw8250_serial_out;
if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
uart.port.iotype = UPIO_MEM32;
uart.port.serial_in = dw8250_serial_in32;
uart.port.serial_out = dw8250_serial_out32;
break;
default:
dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
val);
return -EINVAL;
}
}
if (!of_property_read_u32(np, "reg-shift", &val))
uart.port.regshift = val;
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev, "no clock-frequency property set\n");
return -EINVAL;
}
uart.port.uartclk = val;
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
platform_set_drvdata(pdev, data);
return 0;
}
static int dw8250_remove(struct platform_device *pdev)
{
struct dw8250_data *data = platform_get_drvdata(pdev);
serial8250_unregister_port(data->line);
return 0;
}
#ifdef CONFIG_PM
static int dw8250_suspend(struct platform_device *pdev, pm_message_t state)
{
struct dw8250_data *data = platform_get_drvdata(pdev);
serial8250_suspend_port(data->line);
return 0;
}
static int dw8250_resume(struct platform_device *pdev)
{
struct dw8250_data *data = platform_get_drvdata(pdev);
serial8250_resume_port(data->line);
return 0;
}
#else
#define dw8250_suspend NULL
#define dw8250_resume NULL
#endif /* CONFIG_PM */
static const struct of_device_id dw8250_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_match);
static struct platform_driver dw8250_platform_driver = {
.driver = {
.name = "dw-apb-uart",
.owner = THIS_MODULE,
.of_match_table = dw8250_match,
},
.probe = dw8250_probe,
.remove = dw8250_remove,
.suspend = dw8250_suspend,
.resume = dw8250_resume,
};
module_platform_driver(dw8250_platform_driver);
MODULE_AUTHOR("Jamie Iles");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");