Staging
v0.6.0
v0.6.0
https://github.com/torvalds/linux
Tip revision: cfbf8d4857c26a8a307fb7cd258074c9dcd8c691 authored by Linus Torvalds on 24 February 2014, 01:40:03 UTC
Linux 3.14-rc4
Linux 3.14-rc4
Tip revision: cfbf8d4
8250_dw.c
/*
* Synopsys DesignWare 8250 driver.
*
* Copyright 2011 Picochip, Jamie Iles.
* Copyright 2013 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
* LCR is written whilst busy. If it is, then a busy detect interrupt is
* raised, the LCR needs to be rewritten and the uart status register read.
*/
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <asm/byteorder.h>
#include "8250.h"
/* Offsets for the DesignWare specific registers */
#define DW_UART_USR 0x1f /* UART Status Register */
#define DW_UART_CPR 0xf4 /* Component Parameter Register */
#define DW_UART_UCV 0xf8 /* UART Component Version */
/* Component Parameter Register bits */
#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0)
#define DW_UART_CPR_AFCE_MODE (1 << 4)
#define DW_UART_CPR_THRE_MODE (1 << 5)
#define DW_UART_CPR_SIR_MODE (1 << 6)
#define DW_UART_CPR_SIR_LP_MODE (1 << 7)
#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8)
#define DW_UART_CPR_FIFO_ACCESS (1 << 9)
#define DW_UART_CPR_FIFO_STAT (1 << 10)
#define DW_UART_CPR_SHADOW (1 << 11)
#define DW_UART_CPR_ENCODED_PARMS (1 << 12)
#define DW_UART_CPR_DMA_EXTRA (1 << 13)
#define DW_UART_CPR_FIFO_MODE (0xff << 16)
/* Helper for fifo size calculation */
#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16)
struct dw8250_data {
u8 usr_reg;
int last_mcr;
int line;
struct clk *clk;
struct uart_8250_dma dma;
};
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
/* If reading MSR, report CTS asserted when auto-CTS/RTS enabled */
if (offset == UART_MSR && d->last_mcr & UART_MCR_AFE) {
value |= UART_MSR_CTS;
value &= ~UART_MSR_DCTS;
}
return value;
}
static void dw8250_force_idle(struct uart_port *p)
{
serial8250_clear_and_reinit_fifos(container_of
(p, struct uart_8250_port, port));
(void)p->serial_in(p, UART_RX);
}
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
if (offset == UART_MCR)
d->last_mcr = value;
writeb(value, p->membase + (offset << p->regshift));
/* Make sure LCR write wasn't ignored */
if (offset == UART_LCR) {
int tries = 1000;
while (tries--) {
unsigned int lcr = p->serial_in(p, UART_LCR);
if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
return;
dw8250_force_idle(p);
writeb(value, p->membase + (UART_LCR << p->regshift));
}
dev_err(p->dev, "Couldn't set LCR to %d\n", value);
}
}
static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
{
unsigned int value = readb(p->membase + (offset << p->regshift));
return dw8250_modify_msr(p, offset, value);
}
/* Read Back (rb) version to ensure register access ording. */
static void dw8250_serial_out_rb(struct uart_port *p, int offset, int value)
{
dw8250_serial_out(p, offset, value);
dw8250_serial_in(p, UART_LCR);
}
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
if (offset == UART_MCR)
d->last_mcr = value;
writel(value, p->membase + (offset << p->regshift));
/* Make sure LCR write wasn't ignored */
if (offset == UART_LCR) {
int tries = 1000;
while (tries--) {
unsigned int lcr = p->serial_in(p, UART_LCR);
if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
return;
dw8250_force_idle(p);
writel(value, p->membase + (UART_LCR << p->regshift));
}
dev_err(p->dev, "Couldn't set LCR to %d\n", value);
}
}
static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
{
unsigned int value = readl(p->membase + (offset << p->regshift));
return dw8250_modify_msr(p, offset, value);
}
static int dw8250_handle_irq(struct uart_port *p)
{
struct dw8250_data *d = p->private_data;
unsigned int iir = p->serial_in(p, UART_IIR);
if (serial8250_handle_irq(p, iir)) {
return 1;
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
/* Clear the USR */
(void)p->serial_in(p, d->usr_reg);
return 1;
}
return 0;
}
static void
dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
if (!state)
pm_runtime_get_sync(port->dev);
serial8250_do_pm(port, state, old);
if (state)
pm_runtime_put_sync_suspend(port->dev);
}
static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
{
struct dw8250_data *data = param;
return chan->chan_id == data->dma.tx_chan_id ||
chan->chan_id == data->dma.rx_chan_id;
}
static void dw8250_setup_port(struct uart_8250_port *up)
{
struct uart_port *p = &up->port;
u32 reg = readl(p->membase + DW_UART_UCV);
/*
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
if (!reg)
return;
dev_dbg_ratelimited(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
reg = readl(p->membase + DW_UART_CPR);
if (!reg)
return;
/* Select the type based on fifo */
if (reg & DW_UART_CPR_FIFO_MODE) {
p->type = PORT_16550A;
p->flags |= UPF_FIXED_TYPE;
p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
up->tx_loadsz = p->fifosize;
up->capabilities = UART_CAP_FIFO;
}
if (reg & DW_UART_CPR_AFCE_MODE)
up->capabilities |= UART_CAP_AFE;
}
static int dw8250_probe_of(struct uart_port *p,
struct dw8250_data *data)
{
struct device_node *np = p->dev->of_node;
u32 val;
bool has_ucv = true;
if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
#ifdef __BIG_ENDIAN
/*
* Low order bits of these 64-bit registers, when
* accessed as a byte, are 7 bytes further down in the
* address space in big endian mode.
*/
p->membase += 7;
#endif
p->serial_out = dw8250_serial_out_rb;
p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
p->type = PORT_OCTEON;
data->usr_reg = 0x27;
has_ucv = false;
} else if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
p->iotype = UPIO_MEM32;
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
break;
default:
dev_err(p->dev, "unsupported reg-io-width (%u)\n", val);
return -EINVAL;
}
}
if (has_ucv)
dw8250_setup_port(container_of(p, struct uart_8250_port, port));
if (!of_property_read_u32(np, "reg-shift", &val))
p->regshift = val;
/* clock got configured through clk api, all done */
if (p->uartclk)
return 0;
/* try to find out clock frequency from DT as fallback */
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(p->dev, "clk or clock-frequency not defined\n");
return -EINVAL;
}
p->uartclk = val;
return 0;
}
static int dw8250_probe_acpi(struct uart_8250_port *up,
struct dw8250_data *data)
{
const struct acpi_device_id *id;
struct uart_port *p = &up->port;
dw8250_setup_port(up);
id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
if (!id)
return -ENODEV;
p->iotype = UPIO_MEM32;
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
p->regshift = 2;
if (!p->uartclk)
p->uartclk = (unsigned int)id->driver_data;
up->dma = &data->dma;
up->dma->rxconf.src_maxburst = p->fifosize / 4;
up->dma->txconf.dst_maxburst = p->fifosize / 4;
return 0;
}
static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct dw8250_data *data;
int err;
if (!regs || !irq) {
dev_err(&pdev->dev, "no registers/irq defined\n");
return -EINVAL;
}
spin_lock_init(&uart.port.lock);
uart.port.mapbase = regs->start;
uart.port.irq = irq->start;
uart.port.handle_irq = dw8250_handle_irq;
uart.port.pm = dw8250_do_pm;
uart.port.type = PORT_8250;
uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
uart.port.dev = &pdev->dev;
uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
resource_size(regs));
if (!uart.port.membase)
return -ENOMEM;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->usr_reg = DW_UART_USR;
data->clk = devm_clk_get(&pdev->dev, NULL);
if (!IS_ERR(data->clk)) {
clk_prepare_enable(data->clk);
uart.port.uartclk = clk_get_rate(data->clk);
}
data->dma.rx_chan_id = -1;
data->dma.tx_chan_id = -1;
data->dma.rx_param = data;
data->dma.tx_param = data;
data->dma.fn = dw8250_dma_filter;
uart.port.iotype = UPIO_MEM;
uart.port.serial_in = dw8250_serial_in;
uart.port.serial_out = dw8250_serial_out;
uart.port.private_data = data;
if (pdev->dev.of_node) {
err = dw8250_probe_of(&uart.port, data);
if (err)
return err;
} else if (ACPI_HANDLE(&pdev->dev)) {
err = dw8250_probe_acpi(&uart, data);
if (err)
return err;
} else {
return -ENODEV;
}
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
platform_set_drvdata(pdev, data);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
}
static int dw8250_remove(struct platform_device *pdev)
{
struct dw8250_data *data = platform_get_drvdata(pdev);
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
if (!IS_ERR(data->clk))
clk_disable_unprepare(data->clk);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int dw8250_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
serial8250_suspend_port(data->line);
return 0;
}
static int dw8250_resume(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
serial8250_resume_port(data->line);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_RUNTIME
static int dw8250_runtime_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
if (!IS_ERR(data->clk))
clk_disable_unprepare(data->clk);
return 0;
}
static int dw8250_runtime_resume(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
if (!IS_ERR(data->clk))
clk_prepare_enable(data->clk);
return 0;
}
#endif
static const struct dev_pm_ops dw8250_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
};
static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ .compatible = "cavium,octeon-3860-uart" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
static const struct acpi_device_id dw8250_acpi_match[] = {
{ "INT33C4", 0 },
{ "INT33C5", 0 },
{ "INT3434", 0 },
{ "INT3435", 0 },
{ "80860F0A", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
static struct platform_driver dw8250_platform_driver = {
.driver = {
.name = "dw-apb-uart",
.owner = THIS_MODULE,
.pm = &dw8250_pm_ops,
.of_match_table = dw8250_of_match,
.acpi_match_table = ACPI_PTR(dw8250_acpi_match),
},
.probe = dw8250_probe,
.remove = dw8250_remove,
};
module_platform_driver(dw8250_platform_driver);
MODULE_AUTHOR("Jamie Iles");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");