/*
    comedi/drivers/serial2002.c
    Skeleton code for a Comedi driver

    COMEDI - Linux Control and Measurement Device Interface
    Copyright (C) 2002 Anders Blomdell <anders.blomdell@control.lth.se>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

/*
Driver: serial2002
Description: Driver for serial connected hardware
Devices:
Author: Anders Blomdell
Updated: Fri,  7 Jun 2002 12:56:45 -0700
Status: in development

*/

#include "../comedidev.h"

#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>

#include <asm/termios.h>
#include <asm/ioctls.h>
#include <linux/serial.h>
#include <linux/poll.h>

/*
 * Board descriptions for two imaginary boards.  Describing the
 * boards in this way is optional, and completely driver-dependent.
 * Some drivers use arrays such as this, other do not.
 */
struct serial2002_board {
	const char *name;
};

static const struct serial2002_board serial2002_boards[] = {
	{
	 .name = "serial2002"}
};

/*
 * Useful for shorthand access to the particular board structure
 */
#define thisboard ((const struct serial2002_board *)dev->board_ptr)

struct serial2002_range_table_t {

	/*  HACK... */
	int length;
	struct comedi_krange range;
};

struct serial2002_private {

	int port;		/*  /dev/ttyS<port> */
	int speed;		/*  baudrate */
	struct file *tty;
	unsigned int ao_readback[32];
	unsigned char digital_in_mapping[32];
	unsigned char digital_out_mapping[32];
	unsigned char analog_in_mapping[32];
	unsigned char analog_out_mapping[32];
	unsigned char encoder_in_mapping[32];
	struct serial2002_range_table_t in_range[32], out_range[32];
};

/*
 * most drivers define the following macro to make it easy to
 * access the private structure.
 */
#define devpriv ((struct serial2002_private *)dev->private)

static int serial2002_attach(struct comedi_device *dev,
			     struct comedi_devconfig *it);
static int serial2002_detach(struct comedi_device *dev);
struct comedi_driver driver_serial2002 = {
	.driver_name = "serial2002",
	.module = THIS_MODULE,
	.attach = serial2002_attach,
	.detach = serial2002_detach,
	.board_name = &serial2002_boards[0].name,
	.offset = sizeof(struct serial2002_board),
	.num_names = ARRAY_SIZE(serial2002_boards),
};

static int serial2002_di_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data);
static int serial2002_do_winsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data);
static int serial2002_ai_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data);
static int serial2002_ao_winsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data);
static int serial2002_ao_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data);

struct serial_data {
	enum { is_invalid, is_digital, is_channel } kind;
	int index;
	unsigned long value;
};

static long tty_ioctl(struct file *f, unsigned op, unsigned long param)
{
#ifdef HAVE_UNLOCKED_IOCTL
	if (f->f_op->unlocked_ioctl) {
		return f->f_op->unlocked_ioctl(f, op, param);
	}
#endif
	if (f->f_op->ioctl) {
		return f->f_op->ioctl(f->f_dentry->d_inode, f, op, param);
	}
	return -ENOSYS;
}

static int tty_write(struct file *f, unsigned char *buf, int count)
{
	int result;
	mm_segment_t oldfs;

	oldfs = get_fs();
	set_fs(KERNEL_DS);
	f->f_pos = 0;
	result = f->f_op->write(f, buf, count, &f->f_pos);
	set_fs(oldfs);
	return result;
}

#if 0
/*
 * On 2.6.26.3 this occaisonally gave me page faults, worked around by
 * settings.c_cc[VMIN] = 0; settings.c_cc[VTIME] = 0
 */
static int tty_available(struct file *f)
{
	long result = 0;
	mm_segment_t oldfs;

	oldfs = get_fs();
	set_fs(KERNEL_DS);
	tty_ioctl(f, FIONREAD, (unsigned long)&result);
	set_fs(oldfs);
	return result;
}
#endif

static int tty_read(struct file *f, int timeout)
{
	int result;

	result = -1;
	if (!IS_ERR(f)) {
		mm_segment_t oldfs;

		oldfs = get_fs();
		set_fs(KERNEL_DS);
		if (f->f_op->poll) {
			struct poll_wqueues table;
			struct timeval start, now;

			do_gettimeofday(&start);
			poll_initwait(&table);
			while (1) {
				long elapsed;
				int mask;

				mask = f->f_op->poll(f, &table.pt);
				if (mask & (POLLRDNORM | POLLRDBAND | POLLIN |
					    POLLHUP | POLLERR)) {
					break;
				}
				do_gettimeofday(&now);
				elapsed =
				    (1000000 * (now.tv_sec - start.tv_sec) +
				     now.tv_usec - start.tv_usec);
				if (elapsed > timeout) {
					break;
				}
				set_current_state(TASK_INTERRUPTIBLE);
				schedule_timeout(((timeout -
						   elapsed) * HZ) / 10000);
			}
			poll_freewait(&table);
			{
				unsigned char ch;

				f->f_pos = 0;
				if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1) {
					result = ch;
				}
			}
		} else {
			/* Device does not support poll, busy wait */
			int retries = 0;
			while (1) {
				unsigned char ch;

				retries++;
				if (retries >= timeout) {
					break;
				}

				f->f_pos = 0;
				if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1) {
					result = ch;
					break;
				}
				udelay(100);
			}
		}
		set_fs(oldfs);
	}
	return result;
}

static void tty_setspeed(struct file *f, int speed)
{
	mm_segment_t oldfs;

	oldfs = get_fs();
	set_fs(KERNEL_DS);
	{
		/*  Set speed */
		struct termios settings;

		tty_ioctl(f, TCGETS, (unsigned long)&settings);
/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX)); */
		settings.c_iflag = 0;
		settings.c_oflag = 0;
		settings.c_lflag = 0;
		settings.c_cflag = CLOCAL | CS8 | CREAD;
		settings.c_cc[VMIN] = 0;
		settings.c_cc[VTIME] = 0;
		switch (speed) {
		case 2400:{
				settings.c_cflag |= B2400;
			}
			break;
		case 4800:{
				settings.c_cflag |= B4800;
			}
			break;
		case 9600:{
				settings.c_cflag |= B9600;
			}
			break;
		case 19200:{
				settings.c_cflag |= B19200;
			}
			break;
		case 38400:{
				settings.c_cflag |= B38400;
			}
			break;
		case 57600:{
				settings.c_cflag |= B57600;
			}
			break;
		case 115200:{
				settings.c_cflag |= B115200;
			}
			break;
		default:{
				settings.c_cflag |= B9600;
			}
			break;
		}
		tty_ioctl(f, TCSETS, (unsigned long)&settings);
/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX)); */
	}
	{
		/*  Set low latency */
		struct serial_struct settings;

		tty_ioctl(f, TIOCGSERIAL, (unsigned long)&settings);
		settings.flags |= ASYNC_LOW_LATENCY;
		tty_ioctl(f, TIOCSSERIAL, (unsigned long)&settings);
	}

	set_fs(oldfs);
}

static void poll_digital(struct file *f, int channel)
{
	char cmd;

	cmd = 0x40 | (channel & 0x1f);
	tty_write(f, &cmd, 1);
}

static void poll_channel(struct file *f, int channel)
{
	char cmd;

	cmd = 0x60 | (channel & 0x1f);
	tty_write(f, &cmd, 1);
}

static struct serial_data serial_read(struct file *f, int timeout)
{
	struct serial_data result;
	int length;

	result.kind = is_invalid;
	result.index = 0;
	result.value = 0;
	length = 0;
	while (1) {
		int data = tty_read(f, timeout);

		length++;
		if (data < 0) {
			printk("serial2002 error\n");
			break;
		} else if (data & 0x80) {
			result.value = (result.value << 7) | (data & 0x7f);
		} else {
			if (length == 1) {
				switch ((data >> 5) & 0x03) {
				case 0:{
						result.value = 0;
						result.kind = is_digital;
					}
					break;
				case 1:{
						result.value = 1;
						result.kind = is_digital;
					}
					break;
				}
			} else {
				result.value =
				    (result.value << 2) | ((data & 0x60) >> 5);
				result.kind = is_channel;
			}
			result.index = data & 0x1f;
			break;
		}
	}
	return result;

}

static void serial_write(struct file *f, struct serial_data data)
{
	if (data.kind == is_digital) {
		unsigned char ch =
		    ((data.value << 5) & 0x20) | (data.index & 0x1f);
		tty_write(f, &ch, 1);
	} else {
		unsigned char ch[6];
		int i = 0;
		if (data.value >= (1L << 30)) {
			ch[i] = 0x80 | ((data.value >> 30) & 0x03);
			i++;
		}
		if (data.value >= (1L << 23)) {
			ch[i] = 0x80 | ((data.value >> 23) & 0x7f);
			i++;
		}
		if (data.value >= (1L << 16)) {
			ch[i] = 0x80 | ((data.value >> 16) & 0x7f);
			i++;
		}
		if (data.value >= (1L << 9)) {
			ch[i] = 0x80 | ((data.value >> 9) & 0x7f);
			i++;
		}
		ch[i] = 0x80 | ((data.value >> 2) & 0x7f);
		i++;
		ch[i] = ((data.value << 5) & 0x60) | (data.index & 0x1f);
		i++;
		tty_write(f, ch, i);
	}
}

static void serial_2002_open(struct comedi_device *dev)
{
	char port[20];

	sprintf(port, "/dev/ttyS%d", devpriv->port);
	devpriv->tty = filp_open(port, 0, O_RDWR);
	if (IS_ERR(devpriv->tty)) {
		printk("serial_2002: file open error = %ld\n",
		       PTR_ERR(devpriv->tty));
	} else {
		struct config_t {

			int kind;
			int bits;
			int min;
			int max;
		};

		struct config_t dig_in_config[32];
		struct config_t dig_out_config[32];
		struct config_t chan_in_config[32];
		struct config_t chan_out_config[32];
		int i;

		for (i = 0; i < 32; i++) {
			dig_in_config[i].kind = 0;
			dig_in_config[i].bits = 0;
			dig_in_config[i].min = 0;
			dig_in_config[i].max = 0;
			dig_out_config[i].kind = 0;
			dig_out_config[i].bits = 0;
			dig_out_config[i].min = 0;
			dig_out_config[i].max = 0;
			chan_in_config[i].kind = 0;
			chan_in_config[i].bits = 0;
			chan_in_config[i].min = 0;
			chan_in_config[i].max = 0;
			chan_out_config[i].kind = 0;
			chan_out_config[i].bits = 0;
			chan_out_config[i].min = 0;
			chan_out_config[i].max = 0;
		}

		tty_setspeed(devpriv->tty, devpriv->speed);
		poll_channel(devpriv->tty, 31);	/*  Start reading configuration */
		while (1) {
			struct serial_data data;

			data = serial_read(devpriv->tty, 1000);
			if (data.kind != is_channel || data.index != 31
			    || !(data.value & 0xe0)) {
				break;
			} else {
				int command, channel, kind;
				struct config_t *cur_config = 0;

				channel = data.value & 0x1f;
				kind = (data.value >> 5) & 0x7;
				command = (data.value >> 8) & 0x3;
				switch (kind) {
				case 1:{
						cur_config = dig_in_config;
					}
					break;
				case 2:{
						cur_config = dig_out_config;
					}
					break;
				case 3:{
						cur_config = chan_in_config;
					}
					break;
				case 4:{
						cur_config = chan_out_config;
					}
					break;
				case 5:{
						cur_config = chan_in_config;
					}
					break;
				}

				if (cur_config) {
					cur_config[channel].kind = kind;
					switch (command) {
					case 0:{
							cur_config[channel].bits
							    =
							    (data.value >> 10) &
							    0x3f;
						}
						break;
					case 1:{
							int unit, sign, min;
							unit =
							    (data.value >> 10) &
							    0x7;
							sign =
							    (data.value >> 13) &
							    0x1;
							min =
							    (data.value >> 14) &
							    0xfffff;

							switch (unit) {
							case 0:{
									min =
									    min
									    *
									    1000000;
								}
								break;
							case 1:{
									min =
									    min
									    *
									    1000;
								}
								break;
							case 2:{
									min =
									    min
									    * 1;
								}
								break;
							}
							if (sign) {
								min = -min;
							}
							cur_config[channel].min
							    = min;
						}
						break;
					case 2:{
							int unit, sign, max;
							unit =
							    (data.value >> 10) &
							    0x7;
							sign =
							    (data.value >> 13) &
							    0x1;
							max =
							    (data.value >> 14) &
							    0xfffff;

							switch (unit) {
							case 0:{
									max =
									    max
									    *
									    1000000;
								}
								break;
							case 1:{
									max =
									    max
									    *
									    1000;
								}
								break;
							case 2:{
									max =
									    max
									    * 1;
								}
								break;
							}
							if (sign) {
								max = -max;
							}
							cur_config[channel].max
							    = max;
						}
						break;
					}
				}
			}
		}
		for (i = 0; i <= 4; i++) {
			/*  Fill in subdev data */
			struct config_t *c;
			unsigned char *mapping = 0;
			struct serial2002_range_table_t *range = 0;
			int kind = 0;

			switch (i) {
			case 0:{
					c = dig_in_config;
					mapping = devpriv->digital_in_mapping;
					kind = 1;
				}
				break;
			case 1:{
					c = dig_out_config;
					mapping = devpriv->digital_out_mapping;
					kind = 2;
				}
				break;
			case 2:{
					c = chan_in_config;
					mapping = devpriv->analog_in_mapping;
					range = devpriv->in_range;
					kind = 3;
				}
				break;
			case 3:{
					c = chan_out_config;
					mapping = devpriv->analog_out_mapping;
					range = devpriv->out_range;
					kind = 4;
				}
				break;
			case 4:{
					c = chan_in_config;
					mapping = devpriv->encoder_in_mapping;
					range = devpriv->in_range;
					kind = 5;
				}
				break;
			default:{
					c = 0;
				}
				break;
			}
			if (c) {
				struct comedi_subdevice *s;
				const struct comedi_lrange **range_table_list =
				    NULL;
				unsigned int *maxdata_list;
				int j, chan;

				for (chan = 0, j = 0; j < 32; j++) {
					if (c[j].kind == kind) {
						chan++;
					}
				}
				s = &dev->subdevices[i];
				s->n_chan = chan;
				s->maxdata = 0;
				if (s->maxdata_list) {
					kfree(s->maxdata_list);
				}
				s->maxdata_list = maxdata_list =
				    kmalloc(sizeof(unsigned int) * s->n_chan,
					    GFP_KERNEL);
				if (s->range_table_list) {
					kfree(s->range_table_list);
				}
				if (range) {
					s->range_table = 0;
					s->range_table_list = range_table_list =
					    kmalloc(sizeof
						    (struct
						     serial2002_range_table_t) *
						    s->n_chan, GFP_KERNEL);
				}
				for (chan = 0, j = 0; j < 32; j++) {
					if (c[j].kind == kind) {
						if (mapping) {
							mapping[chan] = j;
						}
						if (range) {
							range[j].length = 1;
							range[j].range.min =
							    c[j].min;
							range[j].range.max =
							    c[j].max;
							range_table_list[chan] =
							    (const struct
							     comedi_lrange *)
							    &range[j];
						}
						maxdata_list[chan] =
						    ((long long)1 << c[j].bits)
						    - 1;
						chan++;
					}
				}
			}
		}
	}
}

static void serial_2002_close(struct comedi_device *dev)
{
	if (!IS_ERR(devpriv->tty) && (devpriv->tty != 0)) {
		filp_close(devpriv->tty, 0);
	}
}

static int serial2002_di_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data)
{
	int n;
	int chan;

	chan = devpriv->digital_in_mapping[CR_CHAN(insn->chanspec)];
	for (n = 0; n < insn->n; n++) {
		struct serial_data read;

		poll_digital(devpriv->tty, chan);
		while (1) {
			read = serial_read(devpriv->tty, 1000);
			if (read.kind != is_digital || read.index == chan) {
				break;
			}
		}
		data[n] = read.value;
	}
	return n;
}

static int serial2002_do_winsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data)
{
	int n;
	int chan;

	chan = devpriv->digital_out_mapping[CR_CHAN(insn->chanspec)];
	for (n = 0; n < insn->n; n++) {
		struct serial_data write;

		write.kind = is_digital;
		write.index = chan;
		write.value = data[n];
		serial_write(devpriv->tty, write);
	}
	return n;
}

static int serial2002_ai_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data)
{
	int n;
	int chan;

	chan = devpriv->analog_in_mapping[CR_CHAN(insn->chanspec)];
	for (n = 0; n < insn->n; n++) {
		struct serial_data read;

		poll_channel(devpriv->tty, chan);
		while (1) {
			read = serial_read(devpriv->tty, 1000);
			if (read.kind != is_channel || read.index == chan) {
				break;
			}
		}
		data[n] = read.value;
	}
	return n;
}

static int serial2002_ao_winsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data)
{
	int n;
	int chan;

	chan = devpriv->analog_out_mapping[CR_CHAN(insn->chanspec)];
	for (n = 0; n < insn->n; n++) {
		struct serial_data write;

		write.kind = is_channel;
		write.index = chan;
		write.value = data[n];
		serial_write(devpriv->tty, write);
		devpriv->ao_readback[chan] = data[n];
	}
	return n;
}

static int serial2002_ao_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data)
{
	int n;
	int chan = CR_CHAN(insn->chanspec);

	for (n = 0; n < insn->n; n++) {
		data[n] = devpriv->ao_readback[chan];
	}

	return n;
}

static int serial2002_ei_rinsn(struct comedi_device *dev,
			       struct comedi_subdevice *s,
			       struct comedi_insn *insn, unsigned int *data)
{
	int n;
	int chan;

	chan = devpriv->encoder_in_mapping[CR_CHAN(insn->chanspec)];
	for (n = 0; n < insn->n; n++) {
		struct serial_data read;

		poll_channel(devpriv->tty, chan);
		while (1) {
			read = serial_read(devpriv->tty, 1000);
			if (read.kind != is_channel || read.index == chan) {
				break;
			}
		}
		data[n] = read.value;
	}
	return n;
}

static int serial2002_attach(struct comedi_device *dev,
			     struct comedi_devconfig *it)
{
	struct comedi_subdevice *s;

	printk("comedi%d: serial2002: ", dev->minor);
	dev->board_name = thisboard->name;
	if (alloc_private(dev, sizeof(struct serial2002_private)) < 0) {
		return -ENOMEM;
	}
	dev->open = serial_2002_open;
	dev->close = serial_2002_close;
	devpriv->port = it->options[0];
	devpriv->speed = it->options[1];
	printk("/dev/ttyS%d @ %d\n", devpriv->port, devpriv->speed);

	if (alloc_subdevices(dev, 5) < 0)
		return -ENOMEM;

	/* digital input subdevice */
	s = dev->subdevices + 0;
	s->type = COMEDI_SUBD_DI;
	s->subdev_flags = SDF_READABLE;
	s->n_chan = 0;
	s->maxdata = 1;
	s->range_table = &range_digital;
	s->insn_read = &serial2002_di_rinsn;

	/* digital output subdevice */
	s = dev->subdevices + 1;
	s->type = COMEDI_SUBD_DO;
	s->subdev_flags = SDF_WRITEABLE;
	s->n_chan = 0;
	s->maxdata = 1;
	s->range_table = &range_digital;
	s->insn_write = &serial2002_do_winsn;

	/* analog input subdevice */
	s = dev->subdevices + 2;
	s->type = COMEDI_SUBD_AI;
	s->subdev_flags = SDF_READABLE | SDF_GROUND;
	s->n_chan = 0;
	s->maxdata = 1;
	s->range_table = 0;
	s->insn_read = &serial2002_ai_rinsn;

	/* analog output subdevice */
	s = dev->subdevices + 3;
	s->type = COMEDI_SUBD_AO;
	s->subdev_flags = SDF_WRITEABLE;
	s->n_chan = 0;
	s->maxdata = 1;
	s->range_table = 0;
	s->insn_write = &serial2002_ao_winsn;
	s->insn_read = &serial2002_ao_rinsn;

	/* encoder input subdevice */
	s = dev->subdevices + 4;
	s->type = COMEDI_SUBD_COUNTER;
	s->subdev_flags = SDF_READABLE | SDF_LSAMPL;
	s->n_chan = 0;
	s->maxdata = 1;
	s->range_table = 0;
	s->insn_read = &serial2002_ei_rinsn;

	return 1;
}

static int serial2002_detach(struct comedi_device *dev)
{
	struct comedi_subdevice *s;
	int i;

	printk("comedi%d: serial2002: remove\n", dev->minor);
	for (i = 0; i < 4; i++) {
		s = &dev->subdevices[i];
		if (s->maxdata_list) {
			kfree(s->maxdata_list);
		}
		if (s->range_table_list) {
			kfree(s->range_table_list);
		}
	}
	return 0;
}

COMEDI_INITCLEANUP(driver_serial2002);