Staging
v0.6.0
v0.6.0
https://github.com/torvalds/linux
Tip revision: d4e4ab86bcba5a72779c43dc1459f71fea3d89c8 authored by Linus Torvalds on 12 August 2013, 01:04:20 UTC
Linux 3.11-rc5
Linux 3.11-rc5
Tip revision: d4e4ab8
qt2160.c
/*
* qt2160.c - Atmel AT42QT2160 Touch Sense Controller
*
* Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#define QT2160_VALID_CHIPID 0x11
#define QT2160_CMD_CHIPID 0
#define QT2160_CMD_CODEVER 1
#define QT2160_CMD_GSTAT 2
#define QT2160_CMD_KEYS3 3
#define QT2160_CMD_KEYS4 4
#define QT2160_CMD_SLIDE 5
#define QT2160_CMD_GPIOS 6
#define QT2160_CMD_SUBVER 7
#define QT2160_CMD_CALIBRATE 10
#define QT2160_CMD_DRIVE_X 70
#define QT2160_CMD_PWMEN_X 74
#define QT2160_CMD_PWM_DUTY 76
#define QT2160_NUM_LEDS_X 8
#define QT2160_CYCLE_INTERVAL (2*HZ)
static unsigned char qt2160_key2code[] = {
KEY_0, KEY_1, KEY_2, KEY_3,
KEY_4, KEY_5, KEY_6, KEY_7,
KEY_8, KEY_9, KEY_A, KEY_B,
KEY_C, KEY_D, KEY_E, KEY_F,
};
#ifdef CONFIG_LEDS_CLASS
struct qt2160_led {
struct qt2160_data *qt2160;
struct led_classdev cdev;
struct work_struct work;
char name[32];
int id;
enum led_brightness new_brightness;
};
#endif
struct qt2160_data {
struct i2c_client *client;
struct input_dev *input;
struct delayed_work dwork;
spinlock_t lock; /* Protects canceling/rescheduling of dwork */
unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
u16 key_matrix;
#ifdef CONFIG_LEDS_CLASS
struct qt2160_led leds[QT2160_NUM_LEDS_X];
struct mutex led_lock;
#endif
};
static int qt2160_read(struct i2c_client *client, u8 reg);
static int qt2160_write(struct i2c_client *client, u8 reg, u8 data);
#ifdef CONFIG_LEDS_CLASS
static void qt2160_led_work(struct work_struct *work)
{
struct qt2160_led *led = container_of(work, struct qt2160_led, work);
struct qt2160_data *qt2160 = led->qt2160;
struct i2c_client *client = qt2160->client;
int value = led->new_brightness;
u32 drive, pwmen;
mutex_lock(&qt2160->led_lock);
drive = qt2160_read(client, QT2160_CMD_DRIVE_X);
pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X);
if (value != LED_OFF) {
drive |= (1 << led->id);
pwmen |= (1 << led->id);
} else {
drive &= ~(1 << led->id);
pwmen &= ~(1 << led->id);
}
qt2160_write(client, QT2160_CMD_DRIVE_X, drive);
qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen);
/*
* Changing this register will change the brightness
* of every LED in the qt2160. It's a HW limitation.
*/
if (value != LED_OFF)
qt2160_write(client, QT2160_CMD_PWM_DUTY, value);
mutex_unlock(&qt2160->led_lock);
}
static void qt2160_led_set(struct led_classdev *cdev,
enum led_brightness value)
{
struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev);
led->new_brightness = value;
schedule_work(&led->work);
}
#endif /* CONFIG_LEDS_CLASS */
static int qt2160_read_block(struct i2c_client *client,
u8 inireg, u8 *buffer, unsigned int count)
{
int error, idx = 0;
/*
* Can't use SMBus block data read. Check for I2C functionality to speed
* things up whenever possible. Otherwise we will be forced to read
* sequentially.
*/
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
error = i2c_smbus_write_byte(client, inireg + idx);
if (error) {
dev_err(&client->dev,
"couldn't send request. Returned %d\n", error);
return error;
}
error = i2c_master_recv(client, buffer, count);
if (error != count) {
dev_err(&client->dev,
"couldn't read registers. Returned %d bytes\n", error);
return error;
}
} else {
while (count--) {
int data;
error = i2c_smbus_write_byte(client, inireg + idx);
if (error) {
dev_err(&client->dev,
"couldn't send request. Returned %d\n", error);
return error;
}
data = i2c_smbus_read_byte(client);
if (data < 0) {
dev_err(&client->dev,
"couldn't read register. Returned %d\n", data);
return data;
}
buffer[idx++] = data;
}
}
return 0;
}
static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
{
struct i2c_client *client = qt2160->client;
struct input_dev *input = qt2160->input;
u8 regs[6];
u16 old_matrix, new_matrix;
int ret, i, mask;
dev_dbg(&client->dev, "requesting keys...\n");
/*
* Read all registers from General Status Register
* to GPIOs register
*/
ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
if (ret) {
dev_err(&client->dev,
"could not perform chip read.\n");
return ret;
}
old_matrix = qt2160->key_matrix;
qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];
mask = 0x01;
for (i = 0; i < 16; ++i, mask <<= 1) {
int keyval = new_matrix & mask;
if ((old_matrix & mask) != keyval) {
input_report_key(input, qt2160->keycodes[i], keyval);
dev_dbg(&client->dev, "key %d %s\n",
i, keyval ? "pressed" : "released");
}
}
input_sync(input);
return 0;
}
static irqreturn_t qt2160_irq(int irq, void *_qt2160)
{
struct qt2160_data *qt2160 = _qt2160;
unsigned long flags;
spin_lock_irqsave(&qt2160->lock, flags);
mod_delayed_work(system_wq, &qt2160->dwork, 0);
spin_unlock_irqrestore(&qt2160->lock, flags);
return IRQ_HANDLED;
}
static void qt2160_schedule_read(struct qt2160_data *qt2160)
{
spin_lock_irq(&qt2160->lock);
schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
spin_unlock_irq(&qt2160->lock);
}
static void qt2160_worker(struct work_struct *work)
{
struct qt2160_data *qt2160 =
container_of(work, struct qt2160_data, dwork.work);
dev_dbg(&qt2160->client->dev, "worker\n");
qt2160_get_key_matrix(qt2160);
/* Avoid device lock up by checking every so often */
qt2160_schedule_read(qt2160);
}
static int qt2160_read(struct i2c_client *client, u8 reg)
{
int ret;
ret = i2c_smbus_write_byte(client, reg);
if (ret) {
dev_err(&client->dev,
"couldn't send request. Returned %d\n", ret);
return ret;
}
ret = i2c_smbus_read_byte(client);
if (ret < 0) {
dev_err(&client->dev,
"couldn't read register. Returned %d\n", ret);
return ret;
}
return ret;
}
static int qt2160_write(struct i2c_client *client, u8 reg, u8 data)
{
int ret;
ret = i2c_smbus_write_byte_data(client, reg, data);
if (ret < 0)
dev_err(&client->dev,
"couldn't write data. Returned %d\n", ret);
return ret;
}
#ifdef CONFIG_LEDS_CLASS
static int qt2160_register_leds(struct qt2160_data *qt2160)
{
struct i2c_client *client = qt2160->client;
int ret;
int i;
mutex_init(&qt2160->led_lock);
for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
struct qt2160_led *led = &qt2160->leds[i];
snprintf(led->name, sizeof(led->name), "qt2160:x%d", i);
led->cdev.name = led->name;
led->cdev.brightness_set = qt2160_led_set;
led->cdev.brightness = LED_OFF;
led->id = i;
led->qt2160 = qt2160;
INIT_WORK(&led->work, qt2160_led_work);
ret = led_classdev_register(&client->dev, &led->cdev);
if (ret < 0)
return ret;
}
/* Tur off LEDs */
qt2160_write(client, QT2160_CMD_DRIVE_X, 0);
qt2160_write(client, QT2160_CMD_PWMEN_X, 0);
qt2160_write(client, QT2160_CMD_PWM_DUTY, 0);
return 0;
}
static void qt2160_unregister_leds(struct qt2160_data *qt2160)
{
int i;
for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
led_classdev_unregister(&qt2160->leds[i].cdev);
cancel_work_sync(&qt2160->leds[i].work);
}
}
#else
static inline int qt2160_register_leds(struct qt2160_data *qt2160)
{
return 0;
}
static inline void qt2160_unregister_leds(struct qt2160_data *qt2160)
{
}
#endif
static bool qt2160_identify(struct i2c_client *client)
{
int id, ver, rev;
/* Read Chid ID to check if chip is valid */
id = qt2160_read(client, QT2160_CMD_CHIPID);
if (id != QT2160_VALID_CHIPID) {
dev_err(&client->dev, "ID %d not supported\n", id);
return false;
}
/* Read chip firmware version */
ver = qt2160_read(client, QT2160_CMD_CODEVER);
if (ver < 0) {
dev_err(&client->dev, "could not get firmware version\n");
return false;
}
/* Read chip firmware revision */
rev = qt2160_read(client, QT2160_CMD_SUBVER);
if (rev < 0) {
dev_err(&client->dev, "could not get firmware revision\n");
return false;
}
dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
ver >> 4, ver & 0xf, rev);
return true;
}
static int qt2160_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct qt2160_data *qt2160;
struct input_dev *input;
int i;
int error;
/* Check functionality */
error = i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE);
if (!error) {
dev_err(&client->dev, "%s adapter not supported\n",
dev_driver_string(&client->adapter->dev));
return -ENODEV;
}
if (!qt2160_identify(client))
return -ENODEV;
/* Chip is valid and active. Allocate structure */
qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
input = input_allocate_device();
if (!qt2160 || !input) {
dev_err(&client->dev, "insufficient memory\n");
error = -ENOMEM;
goto err_free_mem;
}
qt2160->client = client;
qt2160->input = input;
INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
spin_lock_init(&qt2160->lock);
input->name = "AT42QT2160 Touch Sense Keyboard";
input->id.bustype = BUS_I2C;
input->keycode = qt2160->keycodes;
input->keycodesize = sizeof(qt2160->keycodes[0]);
input->keycodemax = ARRAY_SIZE(qt2160_key2code);
__set_bit(EV_KEY, input->evbit);
__clear_bit(EV_REP, input->evbit);
for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
qt2160->keycodes[i] = qt2160_key2code[i];
__set_bit(qt2160_key2code[i], input->keybit);
}
__clear_bit(KEY_RESERVED, input->keybit);
/* Calibrate device */
error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
if (error) {
dev_err(&client->dev, "failed to calibrate device\n");
goto err_free_mem;
}
if (client->irq) {
error = request_irq(client->irq, qt2160_irq,
IRQF_TRIGGER_FALLING, "qt2160", qt2160);
if (error) {
dev_err(&client->dev,
"failed to allocate irq %d\n", client->irq);
goto err_free_mem;
}
}
error = qt2160_register_leds(qt2160);
if (error) {
dev_err(&client->dev, "Failed to register leds\n");
goto err_free_irq;
}
error = input_register_device(qt2160->input);
if (error) {
dev_err(&client->dev,
"Failed to register input device\n");
goto err_unregister_leds;
}
i2c_set_clientdata(client, qt2160);
qt2160_schedule_read(qt2160);
return 0;
err_unregister_leds:
qt2160_unregister_leds(qt2160);
err_free_irq:
if (client->irq)
free_irq(client->irq, qt2160);
err_free_mem:
input_free_device(input);
kfree(qt2160);
return error;
}
static int qt2160_remove(struct i2c_client *client)
{
struct qt2160_data *qt2160 = i2c_get_clientdata(client);
qt2160_unregister_leds(qt2160);
/* Release IRQ so no queue will be scheduled */
if (client->irq)
free_irq(client->irq, qt2160);
cancel_delayed_work_sync(&qt2160->dwork);
input_unregister_device(qt2160->input);
kfree(qt2160);
return 0;
}
static const struct i2c_device_id qt2160_idtable[] = {
{ "qt2160", 0, },
{ }
};
MODULE_DEVICE_TABLE(i2c, qt2160_idtable);
static struct i2c_driver qt2160_driver = {
.driver = {
.name = "qt2160",
.owner = THIS_MODULE,
},
.id_table = qt2160_idtable,
.probe = qt2160_probe,
.remove = qt2160_remove,
};
module_i2c_driver(qt2160_driver);
MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
MODULE_LICENSE("GPL");