Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 2dde18cd1d8fac735875f2e4987f11817cc0bc2c authored by Linus Torvalds on 27 August 2023, 21:49:51 UTC
Linux 6.5
Linux 6.5
Tip revision: 2dde18c
text_amode31.S
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Code that needs to run below 2 GB.
*
* Copyright IBM Corp. 2019
*/
#include <linux/linkage.h>
#include <asm/asm-extable.h>
#include <asm/errno.h>
#include <asm/sigp.h>
.section .amode31.text,"ax"
/*
* Simplified version of expoline thunk. The normal thunks can not be used here,
* because they might be more than 2 GB away, and not reachable by the relative
* branch. No comdat, exrl, etc. optimizations used here, because it only
* affects a few functions that are not performance-relevant.
*/
.macro BR_EX_AMODE31_r14
larl %r1,0f
ex 0,0(%r1)
j .
0: br %r14
.endm
/*
* int _diag14_amode31(unsigned long rx, unsigned long ry1, unsigned long subcode)
*/
SYM_FUNC_START(_diag14_amode31)
lgr %r1,%r2
lgr %r2,%r3
lgr %r3,%r4
lhi %r5,-EIO
sam31
diag %r1,%r2,0x14
.Ldiag14_ex:
ipm %r5
srl %r5,28
.Ldiag14_fault:
sam64
lgfr %r2,%r5
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag14_ex, .Ldiag14_fault)
SYM_FUNC_END(_diag14_amode31)
/*
* int _diag210_amode31(struct diag210 *addr)
*/
SYM_FUNC_START(_diag210_amode31)
lgr %r1,%r2
lhi %r2,-1
sam31
diag %r1,%r0,0x210
.Ldiag210_ex:
ipm %r2
srl %r2,28
.Ldiag210_fault:
sam64
lgfr %r2,%r2
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag210_ex, .Ldiag210_fault)
SYM_FUNC_END(_diag210_amode31)
/*
* int diag8c(struct diag8c *addr, struct ccw_dev_id *devno, size_t len)
*/
SYM_FUNC_START(_diag8c_amode31)
llgf %r3,0(%r3)
sam31
diag %r2,%r4,0x8c
.Ldiag8c_ex:
sam64
lgfr %r2,%r3
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag8c_ex, .Ldiag8c_ex)
SYM_FUNC_END(_diag8c_amode31)
/*
* int _diag26c_amode31(void *req, void *resp, enum diag26c_sc subcode)
*/
SYM_FUNC_START(_diag26c_amode31)
lghi %r5,-EOPNOTSUPP
sam31
diag %r2,%r4,0x26c
.Ldiag26c_ex:
sam64
lgfr %r2,%r5
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag26c_ex, .Ldiag26c_ex)
SYM_FUNC_END(_diag26c_amode31)
/*
* void _diag0c_amode31(struct hypfs_diag0c_entry *entry)
*/
SYM_FUNC_START(_diag0c_amode31)
sam31
diag %r2,%r2,0x0c
sam64
BR_EX_AMODE31_r14
SYM_FUNC_END(_diag0c_amode31)
/*
* void _diag308_reset_amode31(void)
*
* Calls diag 308 subcode 1 and continues execution
*/
SYM_FUNC_START(_diag308_reset_amode31)
larl %r4,ctlregs # Save control registers
stctg %c0,%c15,0(%r4)
lg %r2,0(%r4) # Disable lowcore protection
nilh %r2,0xefff
larl %r4,ctlreg0
stg %r2,0(%r4)
lctlg %c0,%c0,0(%r4)
larl %r4,fpctl # Floating point control register
stfpc 0(%r4)
larl %r4,prefix # Save prefix register
stpx 0(%r4)
larl %r4,prefix_zero # Set prefix register to 0
spx 0(%r4)
larl %r4,continue_psw # Save PSW flags
epsw %r2,%r3
stm %r2,%r3,0(%r4)
larl %r4,.Lrestart_part2 # Setup restart PSW at absolute 0
larl %r3,restart_diag308_psw
og %r4,0(%r3) # Save PSW
lghi %r3,0
sturg %r4,%r3 # Use sturg, because of large pages
lghi %r1,1
lghi %r0,0
diag %r0,%r1,0x308
.Lrestart_part2:
lhi %r0,0 # Load r0 with zero
lhi %r1,2 # Use mode 2 = ESAME (dump)
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode
sam64 # Switch to 64 bit addressing mode
larl %r4,ctlregs # Restore control registers
lctlg %c0,%c15,0(%r4)
larl %r4,fpctl # Restore floating point ctl register
lfpc 0(%r4)
larl %r4,prefix # Restore prefix register
spx 0(%r4)
larl %r4,continue_psw # Restore PSW flags
larl %r2,.Lcontinue
stg %r2,8(%r4)
lpswe 0(%r4)
.Lcontinue:
BR_EX_AMODE31_r14
SYM_FUNC_END(_diag308_reset_amode31)
.section .amode31.data,"aw",@progbits
.balign 8
SYM_DATA_LOCAL(restart_diag308_psw, .long 0x00080000,0x80000000)
SYM_DATA_LOCAL(continue_psw, .quad 0,0)
SYM_DATA_LOCAL(ctlreg0, .quad 0)
SYM_DATA_LOCAL(ctlregs, .fill 16,8,0)
SYM_DATA_LOCAL(fpctl, .long 0)
SYM_DATA_LOCAL(prefix, .long 0)
SYM_DATA_LOCAL(prefix_zero, .long 0)