Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 4330ed8ed4da360ac1ca14b0fddff4c05b10de16 authored by Linus Torvalds on 06 October 2008, 23:39:58 UTC
Linux 2.6.27-rc9
Linux 2.6.27-rc9
Tip revision: 4330ed8
ip22-time.c
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Time operations for IP22 machines. Original code may come from
* Ralf Baechle or David S. Miller (sorry guys, i'm really not sure)
*
* Copyright (C) 2001 by Ladislav Michl
* Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/bcd.h>
#include <linux/ds1286.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/time.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/i8253.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/sgialib.h>
#include <asm/sgi/ioc.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
/*
* Note that mktime uses month from 1 to 12 while rtc_time_to_tm
* uses 0 to 11.
*/
unsigned long read_persistent_clock(void)
{
unsigned int yrs, mon, day, hrs, min, sec;
unsigned int save_control;
unsigned long flags;
spin_lock_irqsave(&rtc_lock, flags);
save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
sec = BCD2BIN(hpc3c0->rtcregs[RTC_SECONDS] & 0xff);
min = BCD2BIN(hpc3c0->rtcregs[RTC_MINUTES] & 0xff);
hrs = BCD2BIN(hpc3c0->rtcregs[RTC_HOURS] & 0x3f);
day = BCD2BIN(hpc3c0->rtcregs[RTC_DATE] & 0xff);
mon = BCD2BIN(hpc3c0->rtcregs[RTC_MONTH] & 0x1f);
yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff);
hpc3c0->rtcregs[RTC_CMD] = save_control;
spin_unlock_irqrestore(&rtc_lock, flags);
if (yrs < 45)
yrs += 30;
if ((yrs += 40) < 70)
yrs += 100;
return mktime(yrs + 1900, mon, day, hrs, min, sec);
}
int rtc_mips_set_time(unsigned long tim)
{
struct rtc_time tm;
unsigned int save_control;
unsigned long flags;
rtc_time_to_tm(tim, &tm);
tm.tm_mon += 1; /* tm_mon starts at zero */
tm.tm_year -= 40;
if (tm.tm_year >= 100)
tm.tm_year -= 100;
spin_lock_irqsave(&rtc_lock, flags);
save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_year);
hpc3c0->rtcregs[RTC_MONTH] = BIN2BCD(tm.tm_mon);
hpc3c0->rtcregs[RTC_DATE] = BIN2BCD(tm.tm_mday);
hpc3c0->rtcregs[RTC_HOURS] = BIN2BCD(tm.tm_hour);
hpc3c0->rtcregs[RTC_MINUTES] = BIN2BCD(tm.tm_min);
hpc3c0->rtcregs[RTC_SECONDS] = BIN2BCD(tm.tm_sec);
hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0;
hpc3c0->rtcregs[RTC_CMD] = save_control;
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
static unsigned long dosample(void)
{
u32 ct0, ct1;
u8 msb, lsb;
/* Start the counter. */
sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
SGINT_TCWORD_MRGEN);
sgint->tcnt2 = SGINT_TCSAMP_COUNTER & 0xff;
sgint->tcnt2 = SGINT_TCSAMP_COUNTER >> 8;
/* Get initial counter invariant */
ct0 = read_c0_count();
/* Latch and spin until top byte of counter2 is zero */
do {
writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
lsb = readb(&sgint->tcnt2);
msb = readb(&sgint->tcnt2);
ct1 = read_c0_count();
} while (msb);
/* Stop the counter. */
writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | SGINT_TCWORD_MSWST,
&sgint->tcword);
/*
* Return the difference, this is how far the r4k counter increments
* for every 1/HZ seconds. We round off the nearest 1 MHz of master
* clock (= 1000000 / HZ / 2).
*/
return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
}
/*
* Here we need to calibrate the cycle counter to at least be close.
*/
__init void plat_time_init(void)
{
unsigned long r4k_ticks[3];
unsigned long r4k_tick;
/*
* Figure out the r4k offset, the algorithm is very simple and works in
* _all_ cases as long as the 8254 counter register itself works ok (as
* an interrupt driving timer it does not because of bug, this is why
* we are using the onchip r4k counter/compare register to serve this
* purpose, but for r4k_offset calculation it will work ok for us).
* There are other very complicated ways of performing this calculation
* but this one works just fine so I am not going to futz around. ;-)
*/
printk(KERN_INFO "Calibrating system timer... ");
dosample(); /* Prime cache. */
dosample(); /* Prime cache. */
/* Zero is NOT an option. */
do {
r4k_ticks[0] = dosample();
} while (!r4k_ticks[0]);
do {
r4k_ticks[1] = dosample();
} while (!r4k_ticks[1]);
if (r4k_ticks[0] != r4k_ticks[1]) {
printk("warning: timer counts differ, retrying... ");
r4k_ticks[2] = dosample();
if (r4k_ticks[2] == r4k_ticks[0]
|| r4k_ticks[2] == r4k_ticks[1])
r4k_tick = r4k_ticks[2];
else {
printk("disagreement, using average... ");
r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
+ r4k_ticks[2]) / 3;
}
} else
r4k_tick = r4k_ticks[0];
printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
(int) (r4k_tick / (500000 / HZ)),
(int) (r4k_tick % (500000 / HZ)));
mips_hpt_frequency = r4k_tick * HZ;
if (ip22_is_fullhouse())
setup_pit_timer();
}
/* Generic SGI handler for (spurious) 8254 interrupts */
void indy_8254timer_irq(void)
{
int irq = SGI_8254_0_IRQ;
ULONG cnt;
char c;
irq_enter();
kstat_this_cpu.irqs[irq]++;
printk(KERN_ALERT "Oops, got 8254 interrupt.\n");
ArcRead(0, &c, 1, &cnt);
ArcEnterInteractiveMode();
irq_exit();
}