Staging
v0.8.1
v0.8.1
https://github.com/torvalds/linux
Tip revision: 4b119e21d0c66c22e8ca03df05d9de623d0eb50f authored by Linus Torvalds on 17 April 2008, 02:49:44 UTC
Linux 2.6.25
Linux 2.6.25
Tip revision: 4b119e2
kgdb_asm.S
/*
* Copyright (C) 2004 Axis Communications AB
*
* Code for handling break 8, hardware breakpoint, single step, and serial
* port exceptions for kernel debugging purposes.
*/
#include <asm/arch/hwregs/intr_vect.h>
;; Exported functions.
.globl kgdb_handle_exception
kgdb_handle_exception:
;; Create a register image of the caller.
;;
;; First of all, save the ACR on the stack since we need it for address calculations.
;; We put it into the register struct later.
subq 4, $sp
move.d $acr, [$sp]
;; Now we are free to use ACR all we want.
;; If we were running this handler with interrupts on, we would have to be careful
;; to save and restore CCS manually, but since we aren't we treat it like every other
;; register.
move.d reg, $acr
move.d $r0, [$acr] ; Save R0 (start of register struct)
addq 4, $acr
move.d $r1, [$acr] ; Save R1
addq 4, $acr
move.d $r2, [$acr] ; Save R2
addq 4, $acr
move.d $r3, [$acr] ; Save R3
addq 4, $acr
move.d $r4, [$acr] ; Save R4
addq 4, $acr
move.d $r5, [$acr] ; Save R5
addq 4, $acr
move.d $r6, [$acr] ; Save R6
addq 4, $acr
move.d $r7, [$acr] ; Save R7
addq 4, $acr
move.d $r8, [$acr] ; Save R8
addq 4, $acr
move.d $r9, [$acr] ; Save R9
addq 4, $acr
move.d $r10, [$acr] ; Save R10
addq 4, $acr
move.d $r11, [$acr] ; Save R11
addq 4, $acr
move.d $r12, [$acr] ; Save R12
addq 4, $acr
move.d $r13, [$acr] ; Save R13
addq 4, $acr
move.d $sp, [$acr] ; Save SP (R14)
addq 4, $acr
;; The ACR register is already saved on the stack, so pop it from there.
move.d [$sp],$r0
move.d $r0, [$acr]
addq 4, $acr
move $bz, [$acr]
addq 1, $acr
move $vr, [$acr]
addq 1, $acr
move $pid, [$acr]
addq 4, $acr
move $srs, [$acr]
addq 1, $acr
move $wz, [$acr]
addq 2, $acr
move $exs, [$acr]
addq 4, $acr
move $eda, [$acr]
addq 4, $acr
move $mof, [$acr]
addq 4, $acr
move $dz, [$acr]
addq 4, $acr
move $ebp, [$acr]
addq 4, $acr
move $erp, [$acr]
addq 4, $acr
move $srp, [$acr]
addq 4, $acr
move $nrp, [$acr]
addq 4, $acr
move $ccs, [$acr]
addq 4, $acr
move $usp, [$acr]
addq 4, $acr
move $spc, [$acr]
addq 4, $acr
;; Skip the pseudo-PC.
addq 4, $acr
;; Save the support registers in bank 0 - 3.
clear.d $r1 ; Bank counter
move.d sreg, $acr
;; Bank 0
move $r1, $srs
nop
nop
nop
move $s0, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s1, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s2, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s3, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s4, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s5, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s6, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s7, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s8, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s9, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s10, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s11, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s12, $r0
move.d $r0, [$acr]
addq 4, $acr
;; Nothing in S13 - S15, bank 0
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
;; Bank 1 and bank 2 have the same layout, hence the loop.
addq 1, $r1
1:
move $r1, $srs
nop
nop
nop
move $s0, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s1, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s2, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s3, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s4, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s5, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s6, $r0
move.d $r0, [$acr]
addq 4, $acr
;; Nothing in S7 - S15, bank 1 and 2
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
clear.d [$acr]
addq 4, $acr
addq 1, $r1
cmpq 3, $r1
bne 1b
nop
;; Bank 3
move $r1, $srs
nop
nop
nop
move $s0, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s1, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s2, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s3, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s4, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s5, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s6, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s7, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s8, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s9, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s10, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s11, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s12, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s13, $r0
move.d $r0, [$acr]
addq 4, $acr
move $s14, $r0
move.d $r0, [$acr]
addq 4, $acr
;; Nothing in S15, bank 3
clear.d [$acr]
addq 4, $acr
;; Check what got us here: get IDX field of EXS.
move $exs, $r10
and.d 0xff00, $r10
lsrq 8, $r10
#if defined(CONFIG_ETRAX_KGDB_PORT0)
cmp.d SER0_INTR_VECT, $r10 ; IRQ for serial port 0
beq sigint
nop
#elif defined(CONFIG_ETRAX_KGDB_PORT1)
cmp.d SER1_INTR_VECT, $r10 ; IRQ for serial port 1
beq sigint
nop
#elif defined(CONFIG_ETRAX_KGDB_PORT2)
cmp.d SER2_INTR_VECT, $r10 ; IRQ for serial port 2
beq sigint
nop
#elif defined(CONFIG_ETRAX_KGDB_PORT3)
cmp.d SER3_INTR_VECT, $r10 ; IRQ for serial port 3
beq sigint
nop
#endif
;; Multiple interrupt must be due to serial break.
cmp.d 0x30, $r10 ; Multiple interrupt
beq sigint
nop
;; Neither of those? Then it's a sigtrap.
ba handle_comm
moveq 5, $r10 ; Set SIGTRAP (delay slot)
sigint:
;; Serial interrupt; get character
jsr getDebugChar
nop ; Delay slot
cmp.b 3, $r10 ; \003 (Ctrl-C)?
bne return ; No, get out of here
nop
moveq 2, $r10 ; Set SIGINT
;;
;; Handle the communication
;;
handle_comm:
move.d internal_stack+1020, $sp ; Use the internal stack which grows upwards
jsr handle_exception ; Interactive routine
nop
;;
;; Return to the caller
;;
return:
;; First of all, write the support registers.
clear.d $r1 ; Bank counter
move.d sreg, $acr
;; Bank 0
move $r1, $srs
nop
nop
nop
move.d [$acr], $r0
move $r0, $s0
addq 4, $acr
move.d [$acr], $r0
move $r0, $s1
addq 4, $acr
move.d [$acr], $r0
move $r0, $s2
addq 4, $acr
move.d [$acr], $r0
move $r0, $s3
addq 4, $acr
move.d [$acr], $r0
move $r0, $s4
addq 4, $acr
move.d [$acr], $r0
move $r0, $s5
addq 4, $acr
;; Nothing in S6 - S7, bank 0.
addq 4, $acr
addq 4, $acr
move.d [$acr], $r0
move $r0, $s8
addq 4, $acr
move.d [$acr], $r0
move $r0, $s9
addq 4, $acr
move.d [$acr], $r0
move $r0, $s10
addq 4, $acr
move.d [$acr], $r0
move $r0, $s11
addq 4, $acr
move.d [$acr], $r0
move $r0, $s12
addq 4, $acr
;; Nothing in S13 - S15, bank 0
addq 4, $acr
addq 4, $acr
addq 4, $acr
;; Bank 1 and bank 2 have the same layout, hence the loop.
addq 1, $r1
2:
move $r1, $srs
nop
nop
nop
move.d [$acr], $r0
move $r0, $s0
addq 4, $acr
move.d [$acr], $r0
move $r0, $s1
addq 4, $acr
move.d [$acr], $r0
move $r0, $s2
addq 4, $acr
;; S3 (MM_CAUSE) is read-only.
addq 4, $acr
move.d [$acr], $r0
move $r0, $s4
addq 4, $acr
;; FIXME: Actually write S5/S6? (Affects MM_CAUSE.)
addq 4, $acr
addq 4, $acr
;; Nothing in S7 - S15, bank 1 and 2
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 4, $acr
addq 1, $r1
cmpq 3, $r1
bne 2b
nop
;; Bank 3
move $r1, $srs
nop
nop
nop
move.d [$acr], $r0
move $r0, $s0
addq 4, $acr
move.d [$acr], $r0
move $r0, $s1
addq 4, $acr
move.d [$acr], $r0
move $r0, $s2
addq 4, $acr
move.d [$acr], $r0
move $r0, $s3
addq 4, $acr
move.d [$acr], $r0
move $r0, $s4
addq 4, $acr
move.d [$acr], $r0
move $r0, $s5
addq 4, $acr
move.d [$acr], $r0
move $r0, $s6
addq 4, $acr
move.d [$acr], $r0
move $r0, $s7
addq 4, $acr
move.d [$acr], $r0
move $r0, $s8
addq 4, $acr
move.d [$acr], $r0
move $r0, $s9
addq 4, $acr
move.d [$acr], $r0
move $r0, $s10
addq 4, $acr
move.d [$acr], $r0
move $r0, $s11
addq 4, $acr
move.d [$acr], $r0
move $r0, $s12
addq 4, $acr
move.d [$acr], $r0
move $r0, $s13
addq 4, $acr
move.d [$acr], $r0
move $r0, $s14
addq 4, $acr
;; Nothing in S15, bank 3
addq 4, $acr
;; Now, move on to the regular register restoration process.
move.d reg, $acr ; Reset ACR to point at the beginning of the register image
move.d [$acr], $r0 ; Restore R0
addq 4, $acr
move.d [$acr], $r1 ; Restore R1
addq 4, $acr
move.d [$acr], $r2 ; Restore R2
addq 4, $acr
move.d [$acr], $r3 ; Restore R3
addq 4, $acr
move.d [$acr], $r4 ; Restore R4
addq 4, $acr
move.d [$acr], $r5 ; Restore R5
addq 4, $acr
move.d [$acr], $r6 ; Restore R6
addq 4, $acr
move.d [$acr], $r7 ; Restore R7
addq 4, $acr
move.d [$acr], $r8 ; Restore R8
addq 4, $acr
move.d [$acr], $r9 ; Restore R9
addq 4, $acr
move.d [$acr], $r10 ; Restore R10
addq 4, $acr
move.d [$acr], $r11 ; Restore R11
addq 4, $acr
move.d [$acr], $r12 ; Restore R12
addq 4, $acr
move.d [$acr], $r13 ; Restore R13
;;
;; We restore all registers, even though some of them probably haven't changed.
;;
addq 4, $acr
move.d [$acr], $sp ; Restore SP (R14)
;; ACR cannot be restored just yet.
addq 8, $acr
;; Skip BZ, VR.
addq 2, $acr
move [$acr], $pid ; Restore PID
addq 4, $acr
move [$acr], $srs ; Restore SRS
nop
nop
nop
addq 1, $acr
;; Skip WZ.
addq 2, $acr
move [$acr], $exs ; Restore EXS.
addq 4, $acr
move [$acr], $eda ; Restore EDA.
addq 4, $acr
move [$acr], $mof ; Restore MOF.
;; Skip DZ.
addq 8, $acr
move [$acr], $ebp ; Restore EBP.
addq 4, $acr
move [$acr], $erp ; Restore ERP.
addq 4, $acr
move [$acr], $srp ; Restore SRP.
addq 4, $acr
move [$acr], $nrp ; Restore NRP.
addq 4, $acr
move [$acr], $ccs ; Restore CCS like an ordinary register.
addq 4, $acr
move [$acr], $usp ; Restore USP
addq 4, $acr
move [$acr], $spc ; Restore SPC
; No restoration of pseudo-PC of course.
move.d reg, $acr ; Reset ACR to point at the beginning of the register image
add.d 15*4, $acr
move.d [$acr], $acr ; Finally, restore ACR.
rete ; Same as jump ERP
rfe ; Shifts CCS