Staging
v0.8.1
v0.8.1
https://github.com/torvalds/linux
Tip revision: 42226c989789d8da4af1de0c31070c96726d990c authored by Linus Torvalds on 16 May 2022, 01:08:58 UTC
Linux 5.18-rc7
Linux 5.18-rc7
Tip revision: 42226c9
ipq8074.dtsi
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ8074";
compatible = "qcom,ipq8074";
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
clock-frequency = <32000>;
#clock-cells = <0>;
};
xo: xo {
compatible = "fixed-clock";
clock-frequency = <19200000>;
#clock-cells = <0>;
};
};
cpus {
#address-cells = <0x1>;
#size-cells = <0x0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x1>;
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x2>;
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
enable-method = "psci";
reg = <0x3>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache {
compatible = "cache";
cache-level = <0x2>;
};
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
smem@4ab00000 {
compatible = "qcom,smem";
reg = <0x0 0x4ab00000 0x0 0x00100000>;
no-map;
hwlocks = <&tcsr_mutex 0>;
};
memory@4ac00000 {
no-map;
reg = <0x0 0x4ac00000 0x0 0x00400000>;
};
};
firmware {
scm {
compatible = "qcom,scm-ipq8074", "qcom,scm";
};
};
soc: soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
ssphy_1: phy@58000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
reg = <0x00058000 0x1c4>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB1_AUX_CLK>,
<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "aux", "cfg_ahb", "ref";
resets = <&gcc GCC_USB1_PHY_BCR>,
<&gcc GCC_USB3PHY_1_PHY_BCR>;
reset-names = "phy","common";
status = "disabled";
usb1_ssphy: phy@58200 {
reg = <0x00058200 0x130>, /* Tx */
<0x00058400 0x200>, /* Rx */
<0x00058800 0x1f8>, /* PCS */
<0x00058600 0x044>; /* PCS misc*/
#phy-cells = <0>;
#clock-cells = <1>;
clocks = <&gcc GCC_USB1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb1_pipe_clk_src";
};
};
qusb_phy_1: phy@59000 {
compatible = "qcom,ipq8074-qusb2-phy";
reg = <0x00059000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
status = "disabled";
};
ssphy_0: phy@78000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
reg = <0x00078000 0x1c4>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB0_AUX_CLK>,
<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "aux", "cfg_ahb", "ref";
resets = <&gcc GCC_USB0_PHY_BCR>,
<&gcc GCC_USB3PHY_0_PHY_BCR>;
reset-names = "phy","common";
status = "disabled";
usb0_ssphy: phy@78200 {
reg = <0x00078200 0x130>, /* Tx */
<0x00078400 0x200>, /* Rx */
<0x00078800 0x1f8>, /* PCS */
<0x00078600 0x044>; /* PCS misc*/
#phy-cells = <0>;
#clock-cells = <1>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
};
};
qusb_phy_0: phy@79000 {
compatible = "qcom,ipq8074-qusb2-phy";
reg = <0x00079000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
<&xo>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
status = "disabled";
};
pcie_qmp0: phy@86000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x00086000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_PCIE0_AUX_CLK>,
<&gcc GCC_PCIE0_AHB_CLK>;
clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
pcie_phy0: phy@86200 {
reg = <0x86200 0x16c>,
<0x86400 0x200>,
<0x86800 0x4f4>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "pcie_0_pipe_clk";
};
};
pcie_qmp1: phy@8e000 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x0008e000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_PCIE1_AUX_CLK>,
<&gcc GCC_PCIE1_AHB_CLK>;
clock-names = "aux", "cfg_ahb";
resets = <&gcc GCC_PCIE1_PHY_BCR>,
<&gcc GCC_PCIE1PHY_PHY_BCR>;
reset-names = "phy",
"common";
status = "disabled";
pcie_phy1: phy@8e200 {
reg = <0x8e200 0x16c>,
<0x8e400 0x200>,
<0x8e800 0x4f4>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "pcie_1_pipe_clk";
};
};
mdio: mdio@90000 {
compatible = "qcom,ipq4019-mdio";
reg = <0x00090000 0x64>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_MDIO_AHB_CLK>;
clock-names = "gcc_mdio_ahb_clk";
status = "disabled";
};
prng: rng@e3000 {
compatible = "qcom,prng-ee";
reg = <0x000e3000 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
status = "disabled";
};
cryptobam: dma-controller@704000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x00704000 0x20000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <1>;
qcom,controlled-remotely;
status = "disabled";
};
crypto: crypto@73a000 {
compatible = "qcom,crypto-v5.1";
reg = <0x0073a000 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_CLK>;
clock-names = "iface", "bus", "core";
dmas = <&cryptobam 2>, <&cryptobam 3>;
dma-names = "rx", "tx";
status = "disabled";
};
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq8074-pinctrl";
reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 70>;
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
serial_4_pins: serial4-pinmux {
pins = "gpio23", "gpio24";
function = "blsp4_uart1";
drive-strength = <8>;
bias-disable;
};
i2c_0_pins: i2c-0-pinmux {
pins = "gpio42", "gpio43";
function = "blsp1_i2c";
drive-strength = <8>;
bias-disable;
};
spi_0_pins: spi-0-pins {
pins = "gpio38", "gpio39", "gpio40", "gpio41";
function = "blsp0_spi";
drive-strength = <8>;
bias-disable;
};
hsuart_pins: hsuart-pins {
pins = "gpio46", "gpio47", "gpio48", "gpio49";
function = "blsp2_uart";
drive-strength = <8>;
bias-disable;
};
qpic_pins: qpic-pins {
pins = "gpio1", "gpio3", "gpio4",
"gpio5", "gpio6", "gpio7",
"gpio8", "gpio10", "gpio11",
"gpio12", "gpio13", "gpio14",
"gpio15", "gpio16", "gpio17";
function = "qpic";
drive-strength = <8>;
bias-disable;
};
};
gcc: gcc@1800000 {
compatible = "qcom,gcc-ipq8074";
reg = <0x01800000 0x80000>;
#clock-cells = <0x1>;
#reset-cells = <0x1>;
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
<0x02400000 0x800000>,
<0x02c00000 0x800000>,
<0x03800000 0x200000>,
<0x0200a000 0x000700>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
cell-index = <0>;
};
sdhc_1: sdhci@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x500>, <0x7824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&xo>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>;
clock-names = "xo", "iface", "core";
max-frequency = <384000000>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
status = "disabled";
};
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x2b000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart3: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 4>,
<&blsp_dma 5>;
dma-names = "tx", "rx";
pinctrl-0 = <&hsuart_pins>;
pinctrl-names = "default";
status = "disabled";
};
blsp1_uart5: serial@78b3000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b3000 0x200>;
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-0 = <&serial_4_pins>;
pinctrl-names = "default";
status = "disabled";
};
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
dma-names = "tx", "rx";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "disabled";
};
blsp1_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
dmas = <&blsp_dma 15>, <&blsp_dma 14>;
dma-names = "rx", "tx";
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "disabled";
};
blsp1_i2c3: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <100000>;
dmas = <&blsp_dma 17>, <&blsp_dma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
blsp1_i2c5: i2c@78b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x78b9000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
dmas = <&blsp_dma 21>, <&blsp_dma 20>;
dma-names = "rx", "tx";
status = "disabled";
};
blsp1_i2c6: i2c@78ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078ba000 0x600>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <100000>;
dmas = <&blsp_dma 23>, <&blsp_dma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07984000 0x1a000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QPIC_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
};
qpic_nand: nand@79b0000 {
compatible = "qcom,ipq8074-nand";
reg = <0x079b0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_QPIC_CLK>,
<&gcc GCC_QPIC_AHB_CLK>;
clock-names = "core", "aon";
dmas = <&qpic_bam 0>,
<&qpic_bam 1>,
<&qpic_bam 2>;
dma-names = "tx", "rx", "cmd";
pinctrl-0 = <&qpic_pins>;
pinctrl-names = "default";
status = "disabled";
};
usb_0: usb@8af8800 {
compatible = "qcom,dwc3";
reg = <0x08af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
<&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "sys_noc_axi",
"master",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
<&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
assigned-clock-rates = <133330000>,
<133330000>,
<19200000>;
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
dwc_0: dwc3@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phys = <&qusb_phy_0>, <&usb0_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
dr_mode = "host";
};
};
usb_1: usb@8cf8800 {
compatible = "qcom,dwc3";
reg = <0x08cf8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
<&gcc GCC_USB1_MASTER_CLK>,
<&gcc GCC_USB1_SLEEP_CLK>,
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
clock-names = "sys_noc_axi",
"master",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
<&gcc GCC_USB1_MASTER_CLK>,
<&gcc GCC_USB1_MOCK_UTMI_CLK>;
assigned-clock-rates = <133330000>,
<133330000>,
<19200000>;
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
dwc_1: dwc3@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
phys = <&qusb_phy_1>, <&usb1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
dr_mode = "host";
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <0x3>;
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
ranges = <0 0xb00a000 0xffd>;
v2m@0 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0xffd>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
watchdog: watchdog@b017000 {
compatible = "qcom,kpss-wdt";
reg = <0xb017000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
clocks = <&sleep_clk>;
timeout-sec = <30>;
};
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
frame@b120000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b128000 0x1000>;
status = "disabled";
};
};
pcie1: pci@10000000 {
compatible = "qcom,pcie-ipq8074";
reg = <0x10000000 0xf1d>,
<0x10000f20 0xa8>,
<0x00088000 0x2000>,
<0x10100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
phys = <&pcie_phy1>;
phy-names = "pciephy";
ranges = <0x81000000 0 0x10200000 0x10200000
0 0x100000 /* downstream I/O */
0x82000000 0 0x10300000 0x10300000
0 0xd00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 142
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 143
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 144
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 145
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
<&gcc GCC_PCIE1_AXI_M_CLK>,
<&gcc GCC_PCIE1_AXI_S_CLK>,
<&gcc GCC_PCIE1_AHB_CLK>,
<&gcc GCC_PCIE1_AUX_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
"ahb",
"aux";
resets = <&gcc GCC_PCIE1_PIPE_ARES>,
<&gcc GCC_PCIE1_SLEEP_ARES>,
<&gcc GCC_PCIE1_CORE_STICKY_ARES>,
<&gcc GCC_PCIE1_AXI_MASTER_ARES>,
<&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE1_AHB_ARES>,
<&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
"axi_m_sticky";
status = "disabled";
};
pcie0: pci@20000000 {
compatible = "qcom,pcie-ipq8074";
reg = <0x20000000 0xf1d>,
<0x20000f20 0xa8>,
<0x00080000 0x2000>,
<0x20100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
phys = <&pcie_phy0>;
phy-names = "pciephy";
ranges = <0x81000000 0 0x20200000 0x20200000
0 0x100000 /* downstream I/O */
0x82000000 0 0x20300000 0x20300000
0 0xd00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 75
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 78
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 79
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 83
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
<&gcc GCC_PCIE0_AHB_CLK>,
<&gcc GCC_PCIE0_AUX_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
"ahb",
"aux";
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
<&gcc GCC_PCIE0_SLEEP_ARES>,
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE0_AHB_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
"axi_m_sticky";
status = "disabled";
};
};
};
