Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 4be3bd7849165e7efa6b0b35a23d6a3598d97465 authored by Linus Torvalds on 23 July 2009, 02:32:59 UTC
Linux 2.6.31-rc4
Linux 2.6.31-rc4
Tip revision: 4be3bd7
proc-fa526.S
/*
* linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
*
* Written by : Luke Lee
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* These are the low level assembler for performing cache and TLB
* functions on the fa526.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include "proc-macros.S"
#define CACHE_DLINESIZE 16
.text
/*
* cpu_fa526_proc_init()
*/
ENTRY(cpu_fa526_proc_init)
mov pc, lr
/*
* cpu_fa526_proc_fin()
*/
ENTRY(cpu_fa526_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl fa_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
nop
nop
ldmfd sp!, {pc}
/*
* cpu_fa526_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*/
.align 4
ENTRY(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
bic ip, ip, #0x0800 @ BTB off
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
nop
nop
mov pc, r0
/*
* cpu_fa526_do_idle()
*/
.align 4
ENTRY(cpu_fa526_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
ENTRY(cpu_fa526_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/* =============================== PageTable ============================== */
/*
* cpu_fa526_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 4
ENTRY(cpu_fa526_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
#else
mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
#endif
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
#endif
mov pc, lr
/*
* cpu_fa526_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 4
ENTRY(cpu_fa526_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
__INIT
.type __fa526_setup, #function
__fa526_setup:
/* On return of this routine, r0 must carry correct flags for CFG register */
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
mov r0, #1
mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
mov r0, #0
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
mcr p15, 0, r0, c3, c0 @ load domain access register
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, fa526_cr1_clear
bic r0, r0, r5
ldr r5, fa526_cr1_set
orr r0, r0, r5
mov pc, lr
.size __fa526_setup, . - __fa526_setup
/*
* .RVI ZFRS BLDP WCAM
* ..11 1001 .111 1101
*
*/
.type fa526_cr1_clear, #object
.type fa526_cr1_set, #object
fa526_cr1_clear:
.word 0x3f3f
fa526_cr1_set:
.word 0x397D
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type fa526_processor_functions, #object
fa526_processor_functions:
.word v4_early_abort
.word pabort_noifar
.word cpu_fa526_proc_init
.word cpu_fa526_proc_fin
.word cpu_fa526_reset
.word cpu_fa526_do_idle
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_fa526_name, #object
cpu_fa526_name:
.asciz "FA526"
.size cpu_fa526_name, . - cpu_fa526_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __fa526_proc_info,#object
__fa526_proc_info:
.long 0x66015261
.long 0xff01fff1
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __fa526_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF
.long cpu_fa526_name
.long fa526_processor_functions
.long fa_tlb_fns
.long fa_user_fns
.long fa_cache_fns
.size __fa526_proc_info, . - __fa526_proc_info