Staging
v0.8.1
v0.8.1
https://github.com/torvalds/linux
Tip revision: 2c6625cd545bdd66acff14f3394865d43920a5c7 authored by Linus Torvalds on 16 August 2015, 23:34:13 UTC
Linux 4.2-rc7
Linux 4.2-rc7
Tip revision: 2c6625c
platsmp.c
/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/reset.h>
#include <linux/cpu.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
#include <asm/mach/map.h>
#include "core.h"
static void __iomem *scu_base_addr;
static void __iomem *sram_base_addr;
static int ncores;
#define PMU_PWRDN_CON 0x08
#define PMU_PWRDN_ST 0x0c
#define PMU_PWRDN_SCU 4
static struct regmap *pmu;
static int pmu_power_domain_is_on(int pd)
{
u32 val;
int ret;
ret = regmap_read(pmu, PMU_PWRDN_ST, &val);
if (ret < 0)
return ret;
return !(val & BIT(pd));
}
static struct reset_control *rockchip_get_core_reset(int cpu)
{
struct device *dev = get_cpu_device(cpu);
struct device_node *np;
/* The cpu device is only available after the initial core bringup */
if (dev)
np = dev->of_node;
else
np = of_get_cpu_node(cpu, 0);
return of_reset_control_get(np, NULL);
}
static int pmu_set_power_domain(int pd, bool on)
{
u32 val = (on) ? 0 : BIT(pd);
int ret;
/*
* We need to soft reset the cpu when we turn off the cpu power domain,
* or else the active processors might be stalled when the individual
* processor is powered down.
*/
if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
struct reset_control *rstc = rockchip_get_core_reset(pd);
if (IS_ERR(rstc)) {
pr_err("%s: could not get reset control for core %d\n",
__func__, pd);
return PTR_ERR(rstc);
}
if (on)
reset_control_deassert(rstc);
else
reset_control_assert(rstc);
reset_control_put(rstc);
}
ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
if (ret < 0) {
pr_err("%s: could not update power domain\n", __func__);
return ret;
}
ret = -1;
while (ret != on) {
ret = pmu_power_domain_is_on(pd);
if (ret < 0) {
pr_err("%s: could not read power domain state\n",
__func__);
return ret;
}
}
return 0;
}
/*
* Handling of CPU cores
*/
static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int ret;
if (!sram_base_addr || !pmu) {
pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
return -ENXIO;
}
if (cpu >= ncores) {
pr_err("%s: cpu %d outside maximum number of cpus %d\n",
__func__, cpu, ncores);
return -ENXIO;
}
/* start the core */
ret = pmu_set_power_domain(0 + cpu, true);
if (ret < 0)
return ret;
if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
/* We communicate with the bootrom to active the cpus other
* than cpu0, after a blob of initialize code, they will
* stay at wfe state, once they are actived, they will check
* the mailbox:
* sram_base_addr + 4: 0xdeadbeaf
* sram_base_addr + 8: start address for pc
* */
udelay(10);
writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
writel(0xDEADBEAF, sram_base_addr + 4);
dsb_sev();
}
return 0;
}
/**
* rockchip_smp_prepare_sram - populate necessary sram block
* Starting cores execute the code residing at the start of the on-chip sram
* after power-on. Therefore make sure, this sram region is reserved and
* big enough. After this check, copy the trampoline code that directs the
* core to the real startup code in ram into the sram-region.
* @node: mmio-sram device node
*/
static int __init rockchip_smp_prepare_sram(struct device_node *node)
{
unsigned int trampoline_sz = &rockchip_secondary_trampoline_end -
&rockchip_secondary_trampoline;
struct resource res;
unsigned int rsize;
int ret;
ret = of_address_to_resource(node, 0, &res);
if (ret < 0) {
pr_err("%s: could not get address for node %s\n",
__func__, node->full_name);
return ret;
}
rsize = resource_size(&res);
if (rsize < trampoline_sz) {
pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n",
__func__, rsize, trampoline_sz);
return -EINVAL;
}
/* set the boot function for the sram code */
rockchip_boot_fn = virt_to_phys(secondary_startup);
/* copy the trampoline to sram, that runs during startup of the core */
memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
flush_cache_all();
outer_clean_range(0, trampoline_sz);
dsb_sev();
return 0;
}
static const struct regmap_config rockchip_pmu_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static int __init rockchip_smp_prepare_pmu(void)
{
struct device_node *node;
void __iomem *pmu_base;
/*
* This function is only called via smp_ops->smp_prepare_cpu().
* That only happens if a "/cpus" device tree node exists
* and has an "enable-method" property that selects the SMP
* operations defined herein.
*/
node = of_find_node_by_path("/cpus");
pmu = syscon_regmap_lookup_by_phandle(node, "rockchip,pmu");
of_node_put(node);
if (!IS_ERR(pmu))
return 0;
pmu = syscon_regmap_lookup_by_compatible("rockchip,rk3066-pmu");
if (!IS_ERR(pmu))
return 0;
/* fallback, create our own regmap for the pmu area */
pmu = NULL;
node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
if (!node) {
pr_err("%s: could not find pmu dt node\n", __func__);
return -ENODEV;
}
pmu_base = of_iomap(node, 0);
if (!pmu_base) {
pr_err("%s: could not map pmu registers\n", __func__);
return -ENOMEM;
}
pmu = regmap_init_mmio(NULL, pmu_base, &rockchip_pmu_regmap_config);
if (IS_ERR(pmu)) {
int ret = PTR_ERR(pmu);
iounmap(pmu_base);
pmu = NULL;
pr_err("%s: regmap init failed\n", __func__);
return ret;
}
return 0;
}
static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *node;
unsigned int i;
node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
if (!node) {
pr_err("%s: could not find sram dt node\n", __func__);
return;
}
sram_base_addr = of_iomap(node, 0);
if (!sram_base_addr) {
pr_err("%s: could not map sram registers\n", __func__);
return;
}
if (rockchip_smp_prepare_pmu())
return;
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
if (rockchip_smp_prepare_sram(node))
return;
/* enable the SCU power domain */
pmu_set_power_domain(PMU_PWRDN_SCU, true);
node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
if (!node) {
pr_err("%s: missing scu\n", __func__);
return;
}
scu_base_addr = of_iomap(node, 0);
if (!scu_base_addr) {
pr_err("%s: could not map scu registers\n", __func__);
return;
}
/*
* While the number of cpus is gathered from dt, also get the
* number of cores from the scu to verify this value when
* booting the cores.
*/
ncores = scu_get_core_count(scu_base_addr);
pr_err("%s: ncores %d\n", __func__, ncores);
scu_enable(scu_base_addr);
} else {
unsigned int l2ctlr;
asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
ncores = ((l2ctlr >> 24) & 0x3) + 1;
}
/* Make sure that all cores except the first are really off */
for (i = 1; i < ncores; i++)
pmu_set_power_domain(0 + i, false);
}
#ifdef CONFIG_HOTPLUG_CPU
static int rockchip_cpu_kill(unsigned int cpu)
{
pmu_set_power_domain(0 + cpu, false);
return 1;
}
static void rockchip_cpu_die(unsigned int cpu)
{
v7_exit_coherency_flush(louis);
while(1)
cpu_do_idle();
}
#endif
static struct smp_operations rockchip_smp_ops __initdata = {
.smp_prepare_cpus = rockchip_smp_prepare_cpus,
.smp_boot_secondary = rockchip_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = rockchip_cpu_kill,
.cpu_die = rockchip_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);