Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 899611ee7d373e5eeda08e9a8632684e1ebbbf00 authored by Linus Torvalds on 29 September 2010, 01:01:22 UTC
Linux 2.6.36-rc6
Linux 2.6.36-rc6
Tip revision: 899611e
mmp2.c
/*
* linux/arch/arm/mach-mmp/mmp2.c
*
* code name MMP2
*
* Copyright (C) 2009 Marvell International Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/gpio.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
#include "common.h"
#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
static struct mfp_addr_map mmp2_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO58, 0x54),
MFP_ADDR_X(GPIO59, GPIO73, 0x280),
MFP_ADDR_X(GPIO74, GPIO101, 0x170),
MFP_ADDR(GPIO102, 0x0),
MFP_ADDR(GPIO103, 0x4),
MFP_ADDR(GPIO104, 0x1fc),
MFP_ADDR(GPIO105, 0x1f8),
MFP_ADDR(GPIO106, 0x1f4),
MFP_ADDR(GPIO107, 0x1f0),
MFP_ADDR(GPIO108, 0x21c),
MFP_ADDR(GPIO109, 0x218),
MFP_ADDR(GPIO110, 0x214),
MFP_ADDR(GPIO111, 0x200),
MFP_ADDR(GPIO112, 0x244),
MFP_ADDR(GPIO113, 0x25c),
MFP_ADDR(GPIO114, 0x164),
MFP_ADDR_X(GPIO115, GPIO122, 0x260),
MFP_ADDR(GPIO123, 0x148),
MFP_ADDR_X(GPIO124, GPIO141, 0xc),
MFP_ADDR(GPIO142, 0x8),
MFP_ADDR_X(GPIO143, GPIO151, 0x220),
MFP_ADDR_X(GPIO152, GPIO153, 0x248),
MFP_ADDR_X(GPIO154, GPIO155, 0x254),
MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
MFP_ADDR(GPIO160, 0x250),
MFP_ADDR(GPIO161, 0x210),
MFP_ADDR(GPIO162, 0x20c),
MFP_ADDR(GPIO163, 0x208),
MFP_ADDR(GPIO164, 0x204),
MFP_ADDR(GPIO165, 0x1ec),
MFP_ADDR(GPIO166, 0x1e8),
MFP_ADDR(GPIO167, 0x1e4),
MFP_ADDR(GPIO168, 0x1e0),
MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
MFP_ADDR(PMIC_INT, 0x2c4),
MFP_ADDR(CLK_REQ, 0x160),
MFP_ADDR_END,
};
void mmp2_clear_pmic_int(void)
{
unsigned long mfpr_pmic, data;
mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
data = __raw_readl(mfpr_pmic);
__raw_writel(data | (1 << 6), mfpr_pmic);
__raw_writel(data, mfpr_pmic);
}
static void __init mmp2_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
/* unmask GPIO edge detection for all 6 banks -- APMASKx */
for (i = 0; i < 6; i++)
__raw_writel(0xffffffff, APMASK(i));
pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
}
void __init mmp2_init_irq(void)
{
mmp2_init_icu();
mmp2_init_gpio();
}
/* APB peripheral clocks */
static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
static struct clk_lookup mmp2_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
};
static int __init mmp2_init(void)
{
if (cpu_is_mmp2()) {
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init();
#endif
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(mmp2_addr_map);
pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
}
return 0;
}
postcore_initcall(mmp2_init);
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_MMP2_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
struct sys_timer mmp2_timer = {
.init = mmp2_timer_init,
};
/* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);