Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: da5cabf80e2433131bf0ed8993abc0f7ea618c73 authored by Linus Torvalds on 16 August 2010, 00:41:37 UTC
Linux 2.6.36-rc1
Linux 2.6.36-rc1
Tip revision: da5cabf
openrd-setup.c
/*
* arch/arm/mach-kirkwood/openrd-setup.c
*
* Marvell OpenRD (Base|Client|Ultimate) Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"
static struct mtd_partition openrd_nand_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = SZ_1M,
.mask_flags = MTD_WRITEABLE
}, {
.name = "uImage",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_4M
}, {
.name = "root",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
};
static struct mv643xx_eth_platform_data openrd_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static struct mv643xx_eth_platform_data openrd_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(24),
};
static struct mv_sata_platform_data openrd_sata_data = {
.n_ports = 2,
};
static struct mvsdio_platform_data openrd_mvsdio_data = {
.gpio_card_detect = 29, /* MPP29 used as SD card detect */
};
static unsigned int openrd_mpp_config[] __initdata = {
MPP29_GPIO,
0
};
static struct i2c_board_info i2c_board_info[] __initdata = {
{
I2C_BOARD_INFO("cs42l51", 0x4a),
},
};
static void __init openrd_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(openrd_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
kirkwood_ehci_init();
if (machine_is_openrd_ultimate()) {
openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
}
kirkwood_ge00_init(&openrd_ge00_data);
if (!machine_is_openrd_base())
kirkwood_ge01_init(&openrd_ge01_data);
kirkwood_sata_init(&openrd_sata_data);
kirkwood_sdio_init(&openrd_mvsdio_data);
kirkwood_i2c_init();
if (machine_is_openrd_client()) {
i2c_register_board_info(0, i2c_board_info,
ARRAY_SIZE(i2c_board_info));
kirkwood_audio_init();
}
}
static int __init openrd_pci_init(void)
{
if (machine_is_openrd_base() ||
machine_is_openrd_client() ||
machine_is_openrd_ultimate())
kirkwood_pcie_init(KW_PCIE0);
return 0;
}
subsys_initcall(openrd_pci_init);
#ifdef CONFIG_MACH_OPENRD_BASE
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_OPENRD_CLIENT
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
#endif