Staging
v0.5.2
v0.5.2
https://github.com/torvalds/linux
Tip revision: 9489e9dcae718d5fde988e4a684a0f55b5f94d17 authored by Linus Torvalds on 26 November 2012, 01:59:19 UTC
Linux 3.7-rc7
Linux 3.7-rc7
Tip revision: 9489e9d
Kconfig
if ARCH_KIRKWOOD
menu "Marvell Kirkwood Implementations"
config MACH_DB88F6281_BP
bool "Marvell DB-88F6281-BP Development Board"
help
Say 'Y' here if you want your kernel to support the
Marvell DB-88F6281-BP Development Board.
config MACH_RD88F6192_NAS
bool "Marvell RD-88F6192-NAS Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6192-NAS Reference Board.
config MACH_RD88F6281
bool "Marvell RD-88F6281 Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
config MACH_MV88F6281GTW_GE
bool "Marvell 88F6281 GTW GE Board"
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board.
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
config MACH_ESATA_SHEEVAPLUG
bool "Marvell eSATA SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell eSATA SheevaPlug Reference Board.
config MACH_GURUPLUG
bool "Marvell GuruPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell GuruPlug Reference Board.
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
select USE_OF
help
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
config MACH_DREAMPLUG_DT
bool "Marvell DreamPlug (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Marvell DreamPlug (Flattened Device Tree).
config MACH_ICONNECT_DT
bool "Iomega Iconnect (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here to enable Iomega Iconnect support.
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
config MACH_IB62X0_DT
bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
Flattened Device Tree.
config MACH_TS219_DT
bool "Device Tree for QNAP TS-11X, TS-21X NAS"
select ARCH_KIRKWOOD_DT
select ARM_APPENDED_DTB
select ARM_ATAG_DTB_COMPAT
help
Say 'Y' here if you want your kernel to support the QNAP
TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
TS-219P+ Turbo NAS devices using Fattened Device Tree.
There are two different Device Tree descriptions, depending
on if the device is based on an if the board uses the MV6281
or MV6282. If you have the wrong one, the buttons will not
work.
config MACH_DOCKSTAR_DT
bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Seagate FreeAgent Dockstar (Flattened Device Tree).
config MACH_GOFLEXNET_DT
bool "Seagate GoFlex Net (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Seagate GoFlex Net (Flattened Device Tree).
config MACH_LSXL_DT
bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
Flattened Device Tree.
config MACH_IOMEGA_IX2_200_DT
bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Iomega StorCenter ix2-200 (Flattened Device Tree).
config MACH_KM_KIRKWOOD_DT
bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
TS-219P+ Turbo NAS devices.
config MACH_TS41X
bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
NAS devices.
config MACH_DOCKSTAR
bool "Seagate FreeAgent DockStar"
help
Say 'Y' here if you want your kernel to support the
Seagate FreeAgent DockStar.
config MACH_OPENRD
bool
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Base Board.
config MACH_OPENRD_CLIENT
bool "Marvell OpenRD Client Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Client Board.
config MACH_OPENRD_ULTIMATE
bool "Marvell OpenRD Ultimate Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Ultimate Board.
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space v2 NAS.
config MACH_INETSPACE_V2
bool "LaCie Internet Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Internet Space v2 NAS.
config MACH_NETSPACE_MAX_V2
bool "LaCie Network Space Max v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space Max v2 NAS.
config MACH_D2NET_V2
bool "LaCie d2 Network v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network v2 NAS.
config MACH_NET5BIG_V2
bool "LaCie 5Big Network v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie 5Big Network v2 NAS.
config MACH_T5325
bool "HP t5325 Thin Client"
help
Say 'Y' here if you want your kernel to support the
HP t5325 Thin Client.
endmenu
endif