Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 5611cc4572e889b62a7b4c72a413536bf6a9c416 authored by Linus Torvalds on 01 December 2011, 22:56:01 UTC
Linux 3.2-rc4
Linux 3.2-rc4
Tip revision: 5611cc4
mach-cpuimx27.c
/*
* Copyright (C) 2009 Eric Benard - eric@eukrea.com
*
* Based on pcm038.c which is :
* Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <mach/eukrea-baseboards.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* UART4 */
#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
PB26_AF_UART4_RTS,
PB28_AF_UART4_TXD,
PB29_AF_UART4_CTS,
PB31_AF_UART4_RXD,
#endif
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* I2C1 */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
/* SDHC2 */
#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/* Quad UART's IRQ */
GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
#endif
/* OTG */
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PC9_PF_USBOTG_DATA0,
PC10_PF_USBOTG_DATA2,
PC11_PF_USBOTG_DATA1,
PC12_PF_USBOTG_DATA4,
PC13_PF_USBOTG_DATA3,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
/* USBH2 */
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
};
static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
.width = 2,
};
static struct resource eukrea_cpuimx27_flash_resource = {
.start = 0xc0000000,
.end = 0xc3ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &eukrea_cpuimx27_flash_data,
},
.num_resources = 1,
.resource = &eukrea_cpuimx27_flash_resource,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct mxc_nand_platform_data
cpuimx27_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_cpuimx27_nor_mtd_device,
};
static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
.bitrate = 100000,
};
static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
};
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
.irq = IRQ_GPIOB(23),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
.irq = IRQ_GPIOB(22),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
.irq = IRQ_GPIOB(27),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
.irq = IRQ_GPIOB(30),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
}
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = serial_platform_data,
},
};
#endif
static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = eukrea_cpuimx27_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = eukrea_cpuimx27_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static int otg_mode_host;
static int __init eukrea_cpuimx27_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = 1;
else if (!strcmp(options, "device"))
otg_mode_host = 0;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 0;
}
__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
static void __init eukrea_cpuimx27_init(void)
{
imx27_soc_init();
mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_mxc_nand(&cpuimx27_nand_board_info);
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx27_add_imx2_wdt(NULL);
imx27_add_mxc_w1(NULL);
#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
/* SDHC2 can be used for Wifi */
imx27_add_mxc_mmc(1, NULL);
#endif
#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
/* in which case UART4 is also used for Bluetooth */
imx27_add_imx_uart3(&uart_pdata);
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
platform_device_register(&serial_device);
#endif
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
} else {
imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
eukrea_mbimx27_baseboard_init();
#endif
}
static void __init eukrea_cpuimx27_timer_init(void)
{
mx27_clocks_init(26000000);
}
static struct sys_timer eukrea_cpuimx27_timer = {
.init = eukrea_cpuimx27_timer_init,
};
MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
.timer = &eukrea_cpuimx27_timer,
.init_machine = eukrea_cpuimx27_init,
MACHINE_END