Staging
v0.5.1
https://github.com/torvalds/linux
Raw File
Tip revision: a351e9b9fc24e982ec2f0e76379a49826036da12 authored by Linus Torvalds on 01 May 2017, 02:47:48 UTC
Linux 4.11
Tip revision: a351e9b
g760a
Kernel driver g760a
===================

Supported chips:
  * Global Mixed-mode Technology Inc. G760A
    Prefix: 'g760a'
    Datasheet: Publicly available at the GMT website
      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf

Author: Herbert Valerio Riedel <hvr@gnu.org>

Description
-----------

The GMT G760A Fan Speed PWM Controller is connected directly to a fan
and performs closed-loop control of the fan speed.

The fan speed is programmed by setting the period via 'pwm1' of two
consecutive speed pulses. The period is defined in terms of clock
cycle counts of an assumed 32kHz clock source.

Setting a period of 0 stops the fan; setting the period to 255 sets
fan to maximum speed.

The measured fan rotation speed returned via 'fan1_input' is derived
from the measured speed pulse period by assuming again a 32kHz clock
source and a 2 pulse-per-revolution fan.

The 'alarms' file provides access to the two alarm bits provided by
the G760A chip's status register: Bit 0 is set when the actual fan
speed differs more than 20% with respect to the programmed fan speed;
bit 1 is set when fan speed is below 1920 RPM.

The g760a driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.
back to top