Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 60cc43fc888428bb2f18f08997432d426a243338 authored by Linus Torvalds on 16 April 2018, 01:24:20 UTC
Linux 4.17-rc1
Linux 4.17-rc1
Tip revision: 60cc43f
k3-dw-mshc.txt
* Hisilicon specific extensions to the Synopsys Designware Mobile
Storage Host Controller
Read synopsys-dw-mshc.txt for more details
The Synopsys designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core Synopsys dw mshc controller properties described
by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
extensions to the Synopsys Designware Mobile Storage Host Controller.
Required Properties:
* compatible: should be one of the following.
- "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
- "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
Optional Properties:
- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
Example:
/* for Hi3620 */
/* SoC portion */
dwmmc_0: dwmmc0@fcd03000 {
compatible = "hisilicon,hi4511-dw-mshc";
reg = <0xfcd03000 0x1000>;
interrupts = <0 16 4>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
clock-names = "ciu", "biu";
};
/* Board portion */
dwmmc0@fcd03000 {
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
bus-width = <4>;
disable-wp;
cd-gpios = <&gpio10 3 0>;
cap-mmc-highspeed;
cap-sd-highspeed;
};
/* for Hi6220 */
dwmmc_1: dwmmc1@f723e000 {
compatible = "hisilicon,hi6220-dw-mshc";
bus-width = <0x4>;
disable-wp;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
card-detect-delay = <200>;
hisilicon,peripheral-syscon = <&ao_ctrl>;
reg = <0x0 0xf723e000 0x0 0x1000>;
interrupts = <0x0 0x49 0x4>;
clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>;
clock-names = "ciu", "biu";
cd-gpios = <&gpio1 0 1>;
pinctrl-names = "default", "idle";
pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
vqmmc-supply = <&ldo7>;
vmmc-supply = <&ldo10>;
};