Staging
v0.8.1
https://github.com/torvalds/linux
Raw File
Tip revision: 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab authored by Linus Torvalds on 27 November 2023, 03:59:33 UTC
Linux 6.7-rc3
Tip revision: 2cc14f5
mediatek,mt7621-gpio.yaml
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpio/mediatek,mt7621-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek MT7621 SoC GPIO controller

maintainers:
  - Sergio Paracuellos <sergio.paracuellos@gmail.com>

description: |
  The IP core used inside these SoCs has 3 banks of 32 GPIOs each.
  The registers of all the banks are interwoven inside one single IO range.
  We load one GPIO controller instance per bank. Also the GPIO controller can receive
  interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU
  using GIC INT12.

properties:
  $nodename:
    pattern: "^gpio@[0-9a-f]+$"

  compatible:
    const: mediatek,mt7621-gpio

  reg:
    maxItems: 1

  "#gpio-cells":
    const: 2

  gpio-controller: true
  gpio-ranges: true

  interrupt-controller: true

  "#interrupt-cells":
    const: 2

  interrupts:
    maxItems: 1

required:
  - compatible
  - reg
  - "#gpio-cells"
  - gpio-controller
  - gpio-ranges
  - interrupt-controller
  - "#interrupt-cells"
  - interrupts

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/mips-gic.h>

    gpio@600 {
      compatible = "mediatek,mt7621-gpio";
      reg = <0x600 0x100>;
      #gpio-cells = <2>;
      gpio-controller;
      gpio-ranges = <&pinctrl 0 0 95>;
      interrupt-controller;
      #interrupt-cells = <2>;
      interrupt-parent = <&gic>;
      interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
    };

...
back to top