Staging
v0.8.1
v0.8.1
https://github.com/torvalds/linux
Tip revision: 815fb87b753055df2d9e50f6cd80eb10235fe3e9 authored by Linus Torvalds on 02 December 2023, 00:01:00 UTC
Merge tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Merge tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Tip revision: 815fb87
pm.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
* Author: Tony Xie <tony.xie@rock-chips.com>
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <linux/suspend.h>
#include <linux/mfd/syscon.h>
#include <linux/regulator/machine.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/suspend.h>
#include "pm.h"
/* These enum are option of low power mode */
enum {
ROCKCHIP_ARM_OFF_LOGIC_NORMAL = 0,
ROCKCHIP_ARM_OFF_LOGIC_DEEP = 1,
};
struct rockchip_pm_data {
const struct platform_suspend_ops *ops;
int (*init)(struct device_node *np);
};
static void __iomem *rk3288_bootram_base;
static phys_addr_t rk3288_bootram_phy;
static struct regmap *pmu_regmap;
static struct regmap *sgrf_regmap;
static struct regmap *grf_regmap;
static u32 rk3288_pmu_pwr_mode_con;
static u32 rk3288_sgrf_soc_con0;
static u32 rk3288_sgrf_cpu_con0;
static inline u32 rk3288_l2_config(void)
{
u32 l2ctlr;
asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (l2ctlr));
return l2ctlr;
}
static void __init rk3288_config_bootdata(void)
{
rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8);
rkpm_bootdata_cpu_code = __pa_symbol(cpu_resume);
rkpm_bootdata_l2ctlr_f = 1;
rkpm_bootdata_l2ctlr = rk3288_l2_config();
}
#define GRF_UOC0_CON0 0x320
#define GRF_UOC1_CON0 0x334
#define GRF_UOC2_CON0 0x348
#define GRF_SIDDQ BIT(13)
static bool rk3288_slp_disable_osc(void)
{
static const u32 reg_offset[] = { GRF_UOC0_CON0, GRF_UOC1_CON0,
GRF_UOC2_CON0 };
u32 reg, i;
/*
* if any usb phy is still on(GRF_SIDDQ==0), that means we need the
* function of usb wakeup, so do not switch to 32khz, since the usb phy
* clk does not connect to 32khz osc
*/
for (i = 0; i < ARRAY_SIZE(reg_offset); i++) {
regmap_read(grf_regmap, reg_offset[i], ®);
if (!(reg & GRF_SIDDQ))
return false;
}
return true;
}
static void rk3288_slp_mode_set(int level)
{
u32 mode_set, mode_set1;
bool osc_disable = rk3288_slp_disable_osc();
regmap_read(sgrf_regmap, RK3288_SGRF_CPU_CON0, &rk3288_sgrf_cpu_con0);
regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
&rk3288_pmu_pwr_mode_con);
/*
* SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
* PCLK_WDT_GATE - disable WDT during suspend.
*/
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
| SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
/*
* The dapswjdp can not auto reset before resume, that cause it may
* access some illegal address during resume. Let's disable it before
* suspend, and the MASKROM will enable it back.
*/
regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
/* booting address of resuming system is from this register value */
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
rk3288_bootram_phy);
mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) |
BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) |
BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) |
BIT(PMU_PWR_MODE_EN) | BIT(PMU_CHIP_PD_EN) |
BIT(PMU_SCU_EN);
mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP);
if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
/* arm off, logic deep sleep */
mode_set |= BIT(PMU_BUS_PD_EN) | BIT(PMU_PMU_USE_LF) |
BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) |
BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN);
if (osc_disable)
mode_set |= BIT(PMU_OSC_24M_DIS);
mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
PMU_ARMINT_WAKEUP_EN);
/*
* In deep suspend we use PMU_PMU_USE_LF to let the rk3288
* switch its main clock supply to the alternative 32kHz
* source. Therefore set 30ms on a 32kHz clock for pmic
* stabilization. Similar 30ms on 24MHz for the other
* mode below.
*/
regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 32 * 30);
/* only wait for stabilization, if we turned the osc off */
regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT,
osc_disable ? 32 * 30 : 0);
} else {
/*
* arm off, logic normal
* if pmu_clk_core_src_gate_en is not set,
* wakeup will be error
*/
mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
PMU_ARMINT_WAKEUP_EN | PMU_GPIOINT_WAKEUP_EN);
/* 30ms on a 24MHz clock for pmic stabilization */
regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30);
/* oscillator is still running, so no need to wait */
regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 0);
}
regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set);
regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1);
}
static void rk3288_slp_mode_set_resume(void)
{
regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0,
rk3288_sgrf_cpu_con0 | SGRF_DAPDEVICEEN_WRITE);
regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON,
rk3288_pmu_pwr_mode_con);
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
| SGRF_FAST_BOOT_EN_WRITE);
}
static int rockchip_lpmode_enter(unsigned long arg)
{
flush_cache_all();
cpu_do_idle();
pr_err("%s: Failed to suspend\n", __func__);
return 1;
}
static int rk3288_suspend_enter(suspend_state_t state)
{
local_fiq_disable();
rk3288_slp_mode_set(ROCKCHIP_ARM_OFF_LOGIC_NORMAL);
cpu_suspend(0, rockchip_lpmode_enter);
rk3288_slp_mode_set_resume();
local_fiq_enable();
return 0;
}
static int rk3288_suspend_prepare(void)
{
return regulator_suspend_prepare(PM_SUSPEND_MEM);
}
static void rk3288_suspend_finish(void)
{
if (regulator_suspend_finish())
pr_err("%s: Suspend finish failed\n", __func__);
}
static int __init rk3288_suspend_init(struct device_node *np)
{
struct device_node *sram_np;
struct resource res;
int ret;
pmu_regmap = syscon_node_to_regmap(np);
if (IS_ERR(pmu_regmap)) {
pr_err("%s: could not find pmu regmap\n", __func__);
return PTR_ERR(pmu_regmap);
}
sgrf_regmap = syscon_regmap_lookup_by_compatible(
"rockchip,rk3288-sgrf");
if (IS_ERR(sgrf_regmap)) {
pr_err("%s: could not find sgrf regmap\n", __func__);
return PTR_ERR(sgrf_regmap);
}
grf_regmap = syscon_regmap_lookup_by_compatible(
"rockchip,rk3288-grf");
if (IS_ERR(grf_regmap)) {
pr_err("%s: could not find grf regmap\n", __func__);
return PTR_ERR(grf_regmap);
}
sram_np = of_find_compatible_node(NULL, NULL,
"rockchip,rk3288-pmu-sram");
if (!sram_np) {
pr_err("%s: could not find bootram dt node\n", __func__);
return -ENODEV;
}
rk3288_bootram_base = of_iomap(sram_np, 0);
if (!rk3288_bootram_base) {
pr_err("%s: could not map bootram base\n", __func__);
of_node_put(sram_np);
return -ENOMEM;
}
ret = of_address_to_resource(sram_np, 0, &res);
if (ret) {
pr_err("%s: could not get bootram phy addr\n", __func__);
of_node_put(sram_np);
return ret;
}
rk3288_bootram_phy = res.start;
of_node_put(sram_np);
rk3288_config_bootdata();
/* copy resume code and data to bootsram */
memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
rk3288_bootram_sz);
return 0;
}
static const struct platform_suspend_ops rk3288_suspend_ops = {
.enter = rk3288_suspend_enter,
.valid = suspend_valid_only_mem,
.prepare = rk3288_suspend_prepare,
.finish = rk3288_suspend_finish,
};
static const struct rockchip_pm_data rk3288_pm_data __initconst = {
.ops = &rk3288_suspend_ops,
.init = rk3288_suspend_init,
};
static const struct of_device_id rockchip_pmu_of_device_ids[] __initconst = {
{
.compatible = "rockchip,rk3288-pmu",
.data = &rk3288_pm_data,
},
{ /* sentinel */ },
};
void __init rockchip_suspend_init(void)
{
const struct rockchip_pm_data *pm_data;
const struct of_device_id *match;
struct device_node *np;
int ret;
np = of_find_matching_node_and_match(NULL, rockchip_pmu_of_device_ids,
&match);
if (!match) {
pr_err("Failed to find PMU node\n");
goto out_put;
}
pm_data = (struct rockchip_pm_data *) match->data;
if (pm_data->init) {
ret = pm_data->init(np);
if (ret) {
pr_err("%s: matches init error %d\n", __func__, ret);
goto out_put;
}
}
suspend_set_ops(pm_data->ops);
out_put:
of_node_put(np);
}