Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 2dde18cd1d8fac735875f2e4987f11817cc0bc2c authored by Linus Torvalds on 27 August 2023, 21:49:51 UTC
Linux 6.5
Linux 6.5
Tip revision: 2dde18c
rockchip,rk3399-dmc.yaml
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# %YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
maintainers:
- Brian Norris <briannorris@chromium.org>
properties:
compatible:
enum:
- rockchip,rk3399-dmc
devfreq-events:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Node to get DDR loading. Refer to
Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
clocks:
maxItems: 1
clock-names:
items:
- const: dmc_clk
operating-points-v2: true
center-supply:
description:
DMC regulator supply.
rockchip,pmu:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the syscon managing the "PMU general register files".
interrupts:
maxItems: 1
description:
The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
finishes, a DCF interrupt is triggered.
rockchip,ddr3_speed_bin:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
being used.
rockchip,pd_idle:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
Configure the PD_IDLE value. Defines the power-down idle period in which
memories are placed into power-down mode if bus is idle for PD_IDLE DFI
clock cycles.
See also rockchip,pd-idle-ns.
rockchip,sr_idle:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
Configure the SR_IDLE value. Defines the self-refresh idle period in
which memories are placed into self-refresh mode if bus is idle for
SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
See also rockchip,sr-idle-ns.
default: 0
rockchip,sr_mc_gate_idle:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
Defines the memory self-refresh and controller clock gating idle period.
Memories are placed into self-refresh mode and memory controller clock
arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
cycles.
See also rockchip,sr-mc-gate-idle-ns.
rockchip,srpd_lite_idle:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
Defines the self-refresh power down idle period in which memories are
placed into self-refresh power down mode if bus is idle for
srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
only.
See also rockchip,srpd-lite-idle-ns.
rockchip,standby_idle:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
Defines the standby idle period in which memories are placed into
self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
if bus is idle for standby_idle * DFI clock cycles.
See also rockchip,standby-idle-ns.
rockchip,dram_dll_dis_freq:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
Note: if DLL was bypassed, the odt will also stop working.
rockchip,phy_dll_dis_freq:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
Note: PHY DLL and PHY ODT are independent.
rockchip,auto_pd_dis_freq:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
Defines the auto PD disable frequency in MHz.
rockchip,ddr3_odt_dis_freq:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1000000 # In case anyone thought this was MHz.
description:
When the DRAM type is DDR3, this parameter defines the ODT disable
frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
the ODT on the DRAM side and controller side are both disabled.
rockchip,ddr3_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is DDR3, this parameter defines the DRAM side drive
strength in ohms.
default: 40
rockchip,ddr3_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is DDR3, this parameter defines the DRAM side ODT
strength in ohms.
default: 120
rockchip,phy_ddr3_ca_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is DDR3, this parameter defines the phy side CA line
(incluing command line, address line and clock line) drive strength.
default: 40
rockchip,phy_ddr3_dq_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is DDR3, this parameter defines the PHY side DQ line
(including DQS/DQ/DM line) drive strength.
default: 40
rockchip,phy_ddr3_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is DDR3, this parameter defines the PHY side ODT
strength.
default: 240
rockchip,lpddr3_odt_dis_freq:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1000000 # In case anyone thought this was MHz.
description:
When the DRAM type is LPDDR3, this parameter defines then ODT disable
frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
ODT on the DRAM side and controller side are both disabled.
rockchip,lpddr3_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
strength in ohms.
default: 34
rockchip,lpddr3_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
strength in ohms.
default: 240
rockchip,phy_lpddr3_ca_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
(including command line, address line and clock line) drive strength.
default: 40
rockchip,phy_lpddr3_dq_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
(including DQS/DQ/DM line) drive strength.
default: 40
rockchip,phy_lpddr3_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When dram type is LPDDR3, this parameter define the phy side odt
strength, default value is 240.
rockchip,lpddr4_odt_dis_freq:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1000000 # In case anyone thought this was MHz.
description:
When the DRAM type is LPDDR4, this parameter defines the ODT disable
frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
the ODT on the DRAM side and controller side are both disabled.
rockchip,lpddr4_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
strength in ohms.
default: 60
rockchip,lpddr4_dq_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
DQS/DQ line strength in ohms.
default: 40
rockchip,lpddr4_ca_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
CA line strength in ohms.
default: 40
rockchip,phy_lpddr4_ca_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
(including command address line) drive strength.
default: 40
rockchip,phy_lpddr4_ck_cs_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the PHY side clock
line and CS line drive strength.
default: 80
rockchip,phy_lpddr4_dq_drv:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
(including DQS/DQ/DM line) drive strength.
default: 80
rockchip,phy_lpddr4_odt:
deprecated: true
$ref: /schemas/types.yaml#/definitions/uint32
description:
When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
strength.
default: 60
rockchip,pd-idle-ns:
description:
Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
period in which memories are placed into power-down mode if bus is idle
for PD_IDLE nanoseconds.
rockchip,sr-idle-ns:
description:
Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
period in which memories are placed into self-refresh mode if bus is idle
for SR_IDLE nanoseconds.
default: 0
rockchip,sr-mc-gate-idle-ns:
description:
Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
Memories are placed into self-refresh mode and memory controller clock
arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
rockchip,srpd-lite-idle-ns:
description:
Defines the self-refresh power down idle period in which memories are
placed into self-refresh power down mode if bus is idle for
srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only.
rockchip,standby-idle-ns:
description:
Defines the standby idle period in which memories are placed into
self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
if bus is idle for standby_idle nanoseconds.
rockchip,pd-idle-dis-freq-hz:
description:
Defines the power-down idle disable frequency in Hz. When the DDR
frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
See also rockchip,pd-idle-ns.
rockchip,sr-idle-dis-freq-hz:
description:
Defines the self-refresh idle disable frequency in Hz. When the DDR
frequency is greater than sr-idle-dis-freq, self-refresh idle is
disabled. See also rockchip,sr-idle-ns.
rockchip,sr-mc-gate-idle-dis-freq-hz:
description:
Defines the self-refresh and memory-controller clock gating disable
frequency in Hz. When the DDR frequency is greater than
sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
rockchip,sr-mc-gate-idle-ns.
rockchip,srpd-lite-idle-dis-freq-hz:
description:
Defines the self-refresh power down idle disable frequency in Hz. When
the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
not be placed into self-refresh power down mode when idle. See also
rockchip,srpd-lite-idle-ns.
rockchip,standby-idle-dis-freq-hz:
description:
Defines the standby idle disable frequency in Hz. When the DDR frequency
is greater than standby-idle-dis-freq, standby idle is disabled. See also
rockchip,standby-idle-ns.
required:
- compatible
- devfreq-events
- clocks
- clock-names
- operating-points-v2
- center-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/rk3399-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
memory-controller {
compatible = "rockchip,rk3399-dmc";
devfreq-events = <&dfi>;
rockchip,pmu = <&pmu>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_DDRC>;
clock-names = "dmc_clk";
operating-points-v2 = <&dmc_opp_table>;
center-supply = <&ppvar_centerlogic>;
rockchip,pd-idle-ns = <160>;
rockchip,sr-idle-ns = <10240>;
rockchip,sr-mc-gate-idle-ns = <40960>;
rockchip,srpd-lite-idle-ns = <61440>;
rockchip,standby-idle-ns = <81920>;
rockchip,ddr3_odt_dis_freq = <333000000>;
rockchip,lpddr3_odt_dis_freq = <333000000>;
rockchip,lpddr4_odt_dis_freq = <333000000>;
rockchip,pd-idle-dis-freq-hz = <1000000000>;
rockchip,sr-idle-dis-freq-hz = <1000000000>;
rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
rockchip,srpd-lite-idle-dis-freq-hz = <0>;
rockchip,standby-idle-dis-freq-hz = <928000000>;
};