Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 3906fe9bb7f1a2c8667ae54e967dc8690824f4ea authored by Linus Torvalds on 25 October 2021, 18:30:31 UTC
Linux 5.15-rc7
Linux 5.15-rc7
Tip revision: 3906fe9
qcom,sm8150-pinctrl.txt
Qualcomm SM8150 TLMM block
This binding describes the Top Level Mode Multiplexer block found in the
QCS404 platform.
- compatible:
Usage: required
Value type: <string>
Definition: must be "qcom,sm8150-pinctrl"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: the base address and size of the north, south, west
and east TLMM tiles.
- reg-names:
Usage: required
Value type: <prop-encoded-array>
Defintiion: names for the cells of reg, must contain "north", "south"
"west" and "east".
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: should specify the TLMM summary IRQ.
- interrupt-controller:
Usage: required
Value type: <none>
Definition: identifies this node as an interrupt controller
- #interrupt-cells:
Usage: required
Value type: <u32>
Definition: must be 2. Specifying the pin number and flags, as defined
in <dt-bindings/interrupt-controller/irq.h>
- gpio-controller:
Usage: required
Value type: <none>
Definition: identifies this node as a gpio controller
- #gpio-cells:
Usage: required
Value type: <u32>
Definition: must be 2. Specifying the pin number and flags, as defined
in <dt-bindings/gpio/gpio.h>
- gpio-ranges:
Usage: required
Value type: <prop-encoded-array>
Definition: see ../gpio/gpio.txt
- gpio-reserved-ranges:
Usage: optional
Value type: <prop-encoded-array>
Definition: see ../gpio/gpio.txt
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
a general description of GPIO and interrupt bindings.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as pull-up, drive strength, etc.
PIN CONFIGURATION NODES:
The name of each subnode is not important; all subnodes should be enumerated
and processed purely based on their content.
Each subnode only affects those parameters that are explicitly listed. In
other words, a subnode that lists a mux function but no pin configuration
parameters implies no information about any pin configuration parameters.
Similarly, a pin subnode that describes a pullup parameter implies no
information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins:
Usage: required
Value type: <string-array>
Definition: List of gpio pins affected by the properties specified in
this subnode.
Valid pins are:
gpio0-gpio149
Supports mux, bias and drive-strength
sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
sdc2_data sdc1_rclk
Supports bias and drive-strength
ufs_reset
Supports bias and drive-strength
- function:
Usage: required
Value type: <string>
Definition: Specify the alternative function to be configured for the
specified pins. Functions are only valid for gpio pins.
Valid values are:
adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
atest_char0, atest_char1, atest_char2, atest_char3,
audio_ref, atest_usb1, atest_usb2, atest_usb10,
atest_usb11, atest_usb12, atest_usb13, atest_usb20,
atest_usb21, atest_usb22, atest_usb2, atest_usb23,
btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
cci_timer1, cci_timer2, cci_timer3, cci_timer4,
cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd,
emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist,
lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps,
pa_indicator, pci_e0, phase_flag, pll_bypassnl,
pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws,
prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable,
qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s,
qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16,
qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii,
sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s,
tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset
- bias-disable:
Usage: optional
Value type: <none>
Definition: The specified pins should be configued as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
Definition: The specified pins should be configued as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
Definition: The specified pins should be configued as pull up.
- output-high:
Usage: optional
Value type: <none>
Definition: The specified pins are configured in output mode, driven
high.
Not valid for sdc pins.
- output-low:
Usage: optional
Value type: <none>
Definition: The specified pins are configured in output mode, driven
low.
Not valid for sdc pins.
- drive-strength:
Usage: optional
Value type: <u32>
Definition: Selects the drive strength for the specified pins, in mA.
Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
Example:
tlmm: pinctrl@3000000 {
compatible = "qcom,sm8150-pinctrl";
reg = <0x03100000 0x300000>,
<0x03500000 0x300000>,
<0x03900000 0x300000>,
<0x03D00000 0x300000>;
reg-names = "west", "east", "north", "south";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 175>;
gpio-reserved-ranges = <0 4>, <126 4>;
interrupt-controller;
#interrupt-cells = <2>;
};