#!/bin/bash
# SPDX-License-Identifier: GPL-2.0

ALL_TESTS="ping_ipv4 ping_ipv6"
NUM_NETIFS=4
source lib.sh

h1_create()
{
	vrf_create "vrf-h1"
	ip link set dev vrf-h1 up

	ip link set dev $h1 up
	vlan_create $h1 1 vrf-h1 192.0.2.2/24 2001:db8:1::2/64

	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
}

h1_destroy()
{
	ip route del 2001:db8:2::/64 vrf vrf-h1
	ip route del 198.51.100.0/24 vrf vrf-h1

	vlan_destroy $h1 1
	ip link set dev $h1 down

	ip link set dev vrf-h1 down
	vrf_destroy "vrf-h1"
}

h2_create()
{
	vrf_create "vrf-h2"
	ip link set dev vrf-h2 up

	ip link set dev $h2 up
	vlan_create $h2 1 vrf-h2 198.51.100.2/24 2001:db8:2::2/64

	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
}

h2_destroy()
{
	ip route del 2001:db8:1::/64 vrf vrf-h2
	ip route del 192.0.2.0/24 vrf vrf-h2

	vlan_destroy $h2 1
	ip link set dev $h2 down

	ip link set dev vrf-h2 down
	vrf_destroy "vrf-h2"
}

router_create()
{
	ip link set dev $rp1 up
	ip link add link $rp1 name $rp1.1 up type vlan id 1

	ip address add 192.0.2.1/24 dev $rp1.1
	ip address add 2001:db8:1::1/64 dev $rp1.1

	ip link set dev $rp2 up
	ip link add link $rp2 name $rp2.1 up type vlan id 1

	ip address add 198.51.100.1/24 dev $rp2.1
	ip address add 2001:db8:2::1/64 dev $rp2.1
}

router_destroy()
{
	ip address del 2001:db8:2::1/64 dev $rp2.1
	ip address del 198.51.100.1/24 dev $rp2.1

	ip link del dev $rp2.1
	ip link set dev $rp2 down

	ip address del 2001:db8:1::1/64 dev $rp1.1
	ip address del 192.0.2.1/24 dev $rp1.1

	ip link del dev $rp1.1
	ip link set dev $rp1 down
}

setup_prepare()
{
	h1=${NETIFS[p1]}
	rp1=${NETIFS[p2]}

	rp2=${NETIFS[p3]}
	h2=${NETIFS[p4]}

	vrf_prepare

	h1_create
	h2_create

	router_create

	forwarding_enable
}

cleanup()
{
	pre_cleanup

	forwarding_restore

	router_destroy

	h2_destroy
	h1_destroy

	vrf_cleanup
}

ping_ipv4()
{
	ping_test $h1.1 198.51.100.2
}

ping_ipv6()
{
	ping6_test $h1.1 2001:db8:2::2
}

trap cleanup EXIT

setup_prepare
setup_wait

tests_run

exit $EXIT_STATUS