Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 9ff01193a20d391e8dbce4403dd5ef87c7eaaca6 authored by Linus Torvalds on 18 November 2018, 21:33:44 UTC
Linux 4.20-rc3
Linux 4.20-rc3
Tip revision: 9ff0119
pci-msi.txt
This document describes the generic device tree binding for describing the
relationship between PCI devices and MSI controllers.
Each PCI device under a root complex is uniquely identified by its Requester ID
(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
Function number.
For the purpose of this document, when treated as a numeric value, a RID is
formatted such that:
* Bits [15:8] are the Bus number.
* Bits [7:3] are the Device number.
* Bits [2:0] are the Function number.
* Any other bits required for padding must be zero.
MSIs may be distinguished in part through the use of sideband data accompanying
writes. In the case of PCI devices, this sideband data may be derived from the
Requester ID. A mechanism is required to associate a device with both the MSI
controllers it can address, and the sideband data that will be associated with
its writes to those controllers.
For generic MSI bindings, see
Documentation/devicetree/bindings/interrupt-controller/msi.txt.
PCI root complex
================
Optional properties
-------------------
- msi-map: Maps a Requester ID to an MSI controller and associated
msi-specifier data. The property is an arbitrary number of tuples of
(rid-base,msi-controller,msi-base,length), where:
* rid-base is a single cell describing the first RID matched by the entry.
* msi-controller is a single phandle to an MSI controller
* msi-base is an msi-specifier describing the msi-specifier produced for the
first RID matched by the entry.
* length is a single cell describing how many consecutive RIDs are matched
following the rid-base.
Any RID r in the interval [rid-base, rid-base + length) is associated with
the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
to an msi-specifier per the msi-map property.
- msi-parent: Describes the MSI parent of the root complex itself. Where
the root complex and MSI controller do not pass sideband data with MSI
writes, this property may be used to describe the MSI controller(s)
used by PCI devices under the root complex, if defined as such in the
binding for the root complex.
Example (1)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
msi: msi-controller@a {
reg = <0xa 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the MSI controller is
* the RID, identity-mapped.
*/
msi-map = <0x0 &msi_a 0x0 0x10000>,
};
};
Example (2)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
msi: msi-controller@a {
reg = <0xa 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the MSI controller is
* the RID, masked to only the device and function bits.
*/
msi-map = <0x0 &msi_a 0x0 0x100>,
msi-map-mask = <0xff>
};
};
Example (3)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
msi: msi-controller@a {
reg = <0xa 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the MSI controller is
* the RID, but the high bit of the bus number is
* ignored.
*/
msi-map = <0x0000 &msi 0x0000 0x8000>,
<0x8000 &msi 0x0000 0x8000>;
};
};
Example (4)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
msi: msi-controller@a {
reg = <0xa 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the MSI controller is
* the RID, but the high bit of the bus number is
* negated.
*/
msi-map = <0x0000 &msi 0x8000 0x8000>,
<0x8000 &msi 0x0000 0x8000>;
};
};
Example (5)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
msi_a: msi-controller@a {
reg = <0xa 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
msi_b: msi-controller@b {
reg = <0xb 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
msi_c: msi-controller@c {
reg = <0xc 0x1>;
compatible = "vendor,some-controller";
msi-controller;
#msi-cells = <1>;
};
pci: pci@c {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to MSI controller a is the
* RID, but the high bit of the bus number is negated.
* The sideband data provided to MSI controller b is the
* RID, identity-mapped.
* MSI controller c is not addressable.
*/
msi-map = <0x0000 &msi_a 0x8000 0x08000>,
<0x8000 &msi_a 0x0000 0x08000>,
<0x0000 &msi_b 0x0000 0x10000>;
};
};