Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: ce522ba9ef7e2d9fb22a39eb3371c0c64e2a433e authored by Linus Torvalds on 11 April 2022, 00:21:36 UTC
Linux 5.18-rc2
Linux 5.18-rc2
Tip revision: ce522ba
pinctrl-mt8186.yaml
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT8186 Pin Controller
maintainers:
- Sean Wang <sean.wang@mediatek.com>
description: |
The Mediatek's Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt8186-pinctrl
gpio-controller: true
'#gpio-cells':
description: |
Number of cells in GPIO specifier. Since the generic GPIO binding is used,
the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
const: 2
gpio-ranges:
maxItems: 1
reg:
description: |
Physical address base for gpio base registers. There are 8 different GPIO
physical address base in mt8186.
maxItems: 8
reg-names:
description: |
Gpio base register names.
items:
- const: iocfg0
- const: iocfg_bm
- const: iocfg_bl
- const: iocfg_br
- const: iocfg_lm
- const: iocfg_rb
- const: iocfg_tl
- const: eint
interrupt-controller: true
'#interrupt-cells':
const: 2
interrupts:
description: The interrupt outputs to sysirq
maxItems: 1
mediatek,rsel-resistance-in-si-unit:
type: boolean
description: |
Identifying i2c pins pull up/down type which is RSEL. It can support
RSEL define or si unit value(ohm) to set different resistance.
# PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'^pins':
type: object
additionalProperties: false
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and
input schmitt.
An example of using macro:
pincontroller {
/* GPIO0 set as multifunction GPIO0 */
gpio-pins {
pins {
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
}
};
/* GPIO128 set as multifunction SDA0 */
i2c0-pins {
pins {
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
}
};
};
$ref: "pinmux-node.yaml"
properties:
pinmux:
description: |
Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
directly.
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
mediatek,drive-strength-adv:
description: |
Describe the specific driving setup property.
For I2C pins, the existing generic driving setup can only support
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
driving setup, the existing generic setup will be disabled.
The specific driving setup is controlled by E1E0EN.
When E1=0/E0=0, the strength is 0.125mA.
When E1=0/E0=1, the strength is 0.25mA.
When E1=1/E0=0, the strength is 0.5mA.
When E1=1/E0=1, the strength is 1mA.
EN is used to enable or disable the specific driving setup.
Valid arguments are described as below:
0: (E1, E0, EN) = (0, 0, 0)
1: (E1, E0, EN) = (0, 0, 1)
2: (E1, E0, EN) = (0, 1, 0)
3: (E1, E0, EN) = (0, 1, 1)
4: (E1, E0, EN) = (1, 0, 0)
5: (E1, E0, EN) = (1, 0, 1)
6: (E1, E0, EN) = (1, 1, 0)
7: (E1, E0, EN) = (1, 1, 1)
So the valid arguments are from 0 to 7.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6, 7]
bias-pull-down:
oneOf:
- type: boolean
- enum: [100, 101, 102, 103]
description: mt8186 pull down PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203]
description: mt8186 pull down RSEL type define value.
- enum: [75000, 5000]
description: mt8186 pull down RSEL type si unit value(ohm).
description: |
For pull down type is normal, it don't need add RSEL & R1R0 define
and resistance value.
For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
"MTK_PUPD_SET_R1R0_11" define in mt8186.
For pull down type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
"mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
define in mt8186. It can also support resistance value(ohm)
"75000" & "5000" in mt8186.
An example of using RSEL define:
pincontroller {
i2c0_pin {
pins {
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
bias-pull-down = <MTK_PULL_SET_RSEL_001>;
}
};
};
An example of using si unit resistance value(ohm):
&pio {
mediatek,rsel-resistance-in-si-unit;
}
pincontroller {
i2c0_pin {
pins {
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
bias-pull-down = <75000>;
}
};
};
bias-pull-up:
oneOf:
- type: boolean
- enum: [100, 101, 102, 103]
description: mt8186 pull up PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203]
description: mt8186 pull up RSEL type define value.
- enum: [1000, 5000, 10000, 75000]
description: mt8186 pull up RSEL type si unit value(ohm).
description: |
For pull up type is normal, it don't need add RSEL & R1R0 define
and resistance value.
For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
"MTK_PUPD_SET_R1R0_11" define in mt8186.
For pull up type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
"mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
define in mt8186. It can also support resistance value(ohm)
"1000" & "5000" & "10000" & "75000" in mt8186.
An example of using si unit resistance value(ohm):
&pio {
mediatek,rsel-resistance-in-si-unit;
}
pincontroller {
i2c0-pins {
pins {
pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
bias-pull-up = <1000>;
}
};
};
bias-disable: true
output-high: true
output-low: true
input-enable: true
input-disable: true
input-schmitt-enable: true
input-schmitt-disable: true
required:
- pinmux
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pio: pinctrl@10005000 {
compatible = "mediatek,mt8186-pinctrl";
reg = <0x10005000 0x1000>,
<0x10002000 0x0200>,
<0x10002200 0x0200>,
<0x10002400 0x0200>,
<0x10002600 0x0200>,
<0x10002A00 0x0200>,
<0x10002c00 0x0200>,
<0x1000b000 0x1000>;
reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
"iocfg_br", "iocfg_lm", "iocfg_rb",
"iocfg_tl", "eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 185>;
interrupt-controller;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
#interrupt-cells = <2>;
pio-pins {
pins {
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
output-low;
};
};
spi0-pins {
pins-spi {
pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
<PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
<PINMUX_GPIO2__FUNC_SPI0_MO_B>;
bias-disable;
};
pins-spi-mi {
pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
bias-pull-down;
};
};
i2c0-pins {
pins {
pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
<PINMUX_GPIO128__FUNC_SDA0>;
bias-pull-up = <MTK_PULL_SET_RSEL_001>;
mediatek,drive-strength-adv = <7>;
};
};
};