Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: b9bbe6ed63b2b9f2c9ee5cbd0f2c946a2723f4ce authored by Linus Torvalds on 17 May 2020, 23:48:37 UTC
Linux 5.7-rc6
Linux 5.7-rc6
Tip revision: b9bbe6e
mdio-mux-bcm-iproc.c
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2016 Broadcom
*/
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/of_mdio.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/mdio-mux.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#define MDIO_RATE_ADJ_EXT_OFFSET 0x000
#define MDIO_RATE_ADJ_INT_OFFSET 0x004
#define MDIO_RATE_ADJ_DIVIDENT_SHIFT 16
#define MDIO_SCAN_CTRL_OFFSET 0x008
#define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR 28
#define MDIO_PARAM_OFFSET 0x23c
#define MDIO_PARAM_MIIM_CYCLE 29
#define MDIO_PARAM_INTERNAL_SEL 25
#define MDIO_PARAM_BUS_ID 22
#define MDIO_PARAM_C45_SEL 21
#define MDIO_PARAM_PHY_ID 16
#define MDIO_PARAM_PHY_DATA 0
#define MDIO_READ_OFFSET 0x240
#define MDIO_READ_DATA_MASK 0xffff
#define MDIO_ADDR_OFFSET 0x244
#define MDIO_CTRL_OFFSET 0x248
#define MDIO_CTRL_WRITE_OP 0x1
#define MDIO_CTRL_READ_OP 0x2
#define MDIO_STAT_OFFSET 0x24c
#define MDIO_STAT_DONE 1
#define BUS_MAX_ADDR 32
#define EXT_BUS_START_ADDR 16
#define MDIO_REG_ADDR_SPACE_SIZE 0x250
#define MDIO_OPERATING_FREQUENCY 11000000
#define MDIO_RATE_ADJ_DIVIDENT 1
struct iproc_mdiomux_desc {
void *mux_handle;
void __iomem *base;
struct device *dev;
struct mii_bus *mii_bus;
struct clk *core_clk;
};
static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md)
{
u32 divisor;
u32 val;
/* Disable external mdio master access */
val = readl(md->base + MDIO_SCAN_CTRL_OFFSET);
val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR);
writel(val, md->base + MDIO_SCAN_CTRL_OFFSET);
if (md->core_clk) {
/* use rate adjust regs to derrive the mdio's operating
* frequency from the specified core clock
*/
divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY;
divisor = divisor / (MDIO_RATE_ADJ_DIVIDENT + 1);
val = divisor;
val |= MDIO_RATE_ADJ_DIVIDENT << MDIO_RATE_ADJ_DIVIDENT_SHIFT;
writel(val, md->base + MDIO_RATE_ADJ_EXT_OFFSET);
writel(val, md->base + MDIO_RATE_ADJ_INT_OFFSET);
}
}
static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
{
u32 val;
return readl_poll_timeout(base + MDIO_STAT_OFFSET, val,
(val & MDIO_STAT_DONE) == result,
2000, 1000000);
}
/* start_miim_ops- Program and start MDIO transaction over mdio bus.
* @base: Base address
* @phyid: phyid of the selected bus.
* @reg: register offset to be read/written.
* @val :0 if read op else value to be written in @reg;
* @op: Operation that need to be carried out.
* MDIO_CTRL_READ_OP: Read transaction.
* MDIO_CTRL_WRITE_OP: Write transaction.
*
* Return value: Successful Read operation returns read reg values and write
* operation returns 0. Failure operation returns negative error code.
*/
static int start_miim_ops(void __iomem *base,
u16 phyid, u32 reg, u16 val, u32 op)
{
u32 param;
int ret;
writel(0, base + MDIO_CTRL_OFFSET);
ret = iproc_mdio_wait_for_idle(base, 0);
if (ret)
goto err;
param = readl(base + MDIO_PARAM_OFFSET);
param |= phyid << MDIO_PARAM_PHY_ID;
param |= val << MDIO_PARAM_PHY_DATA;
if (reg & MII_ADDR_C45)
param |= BIT(MDIO_PARAM_C45_SEL);
writel(param, base + MDIO_PARAM_OFFSET);
writel(reg, base + MDIO_ADDR_OFFSET);
writel(op, base + MDIO_CTRL_OFFSET);
ret = iproc_mdio_wait_for_idle(base, 1);
if (ret)
goto err;
if (op == MDIO_CTRL_READ_OP)
ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
err:
return ret;
}
static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg)
{
struct iproc_mdiomux_desc *md = bus->priv;
int ret;
ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP);
if (ret < 0)
dev_err(&bus->dev, "mdiomux read operation failed!!!");
return ret;
}
static int iproc_mdiomux_write(struct mii_bus *bus,
int phyid, int reg, u16 val)
{
struct iproc_mdiomux_desc *md = bus->priv;
int ret;
/* Write val at reg offset */
ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP);
if (ret < 0)
dev_err(&bus->dev, "mdiomux write operation failed!!!");
return ret;
}
static int mdio_mux_iproc_switch_fn(int current_child, int desired_child,
void *data)
{
struct iproc_mdiomux_desc *md = data;
u32 param, bus_id;
bool bus_dir;
/* select bus and its properties */
bus_dir = (desired_child < EXT_BUS_START_ADDR);
bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR);
param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
param |= (bus_id << MDIO_PARAM_BUS_ID);
writel(param, md->base + MDIO_PARAM_OFFSET);
return 0;
}
static int mdio_mux_iproc_probe(struct platform_device *pdev)
{
struct iproc_mdiomux_desc *md;
struct mii_bus *bus;
struct resource *res;
int rc;
md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
if (!md)
return -ENOMEM;
md->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res->start & 0xfff) {
/* For backward compatibility in case the
* base address is specified with an offset.
*/
dev_info(&pdev->dev, "fix base address in dt-blob\n");
res->start &= ~0xfff;
res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1;
}
md->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(md->base)) {
dev_err(&pdev->dev, "failed to ioremap register\n");
return PTR_ERR(md->base);
}
md->mii_bus = devm_mdiobus_alloc(&pdev->dev);
if (!md->mii_bus) {
dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
return -ENOMEM;
}
md->core_clk = devm_clk_get(&pdev->dev, NULL);
if (md->core_clk == ERR_PTR(-ENOENT) ||
md->core_clk == ERR_PTR(-EINVAL))
md->core_clk = NULL;
else if (IS_ERR(md->core_clk))
return PTR_ERR(md->core_clk);
rc = clk_prepare_enable(md->core_clk);
if (rc) {
dev_err(&pdev->dev, "failed to enable core clk\n");
return rc;
}
bus = md->mii_bus;
bus->priv = md;
bus->name = "iProc MDIO mux bus";
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
bus->parent = &pdev->dev;
bus->read = iproc_mdiomux_read;
bus->write = iproc_mdiomux_write;
bus->phy_mask = ~0;
bus->dev.of_node = pdev->dev.of_node;
rc = mdiobus_register(bus);
if (rc) {
dev_err(&pdev->dev, "mdiomux registration failed\n");
goto out_clk;
}
platform_set_drvdata(pdev, md);
rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn,
&md->mux_handle, md, md->mii_bus);
if (rc) {
dev_info(md->dev, "mdiomux initialization failed\n");
goto out_register;
}
mdio_mux_iproc_config(md);
dev_info(md->dev, "iProc mdiomux registered\n");
return 0;
out_register:
mdiobus_unregister(bus);
out_clk:
clk_disable_unprepare(md->core_clk);
return rc;
}
static int mdio_mux_iproc_remove(struct platform_device *pdev)
{
struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
mdio_mux_uninit(md->mux_handle);
mdiobus_unregister(md->mii_bus);
clk_disable_unprepare(md->core_clk);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mdio_mux_iproc_suspend(struct device *dev)
{
struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
clk_disable_unprepare(md->core_clk);
return 0;
}
static int mdio_mux_iproc_resume(struct device *dev)
{
struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
int rc;
rc = clk_prepare_enable(md->core_clk);
if (rc) {
dev_err(md->dev, "failed to enable core clk\n");
return rc;
}
mdio_mux_iproc_config(md);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(mdio_mux_iproc_pm_ops,
mdio_mux_iproc_suspend, mdio_mux_iproc_resume);
static const struct of_device_id mdio_mux_iproc_match[] = {
{
.compatible = "brcm,mdio-mux-iproc",
},
{},
};
MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match);
static struct platform_driver mdiomux_iproc_driver = {
.driver = {
.name = "mdio-mux-iproc",
.of_match_table = mdio_mux_iproc_match,
.pm = &mdio_mux_iproc_pm_ops,
},
.probe = mdio_mux_iproc_probe,
.remove = mdio_mux_iproc_remove,
};
module_platform_driver(mdiomux_iproc_driver);
MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver");
MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
MODULE_LICENSE("GPL v2");