Staging
v0.7.0
v0.7.0
fsl-sec4.txt
=====================================================================
SEC 4 Device Tree Binding
Copyright (C) 2008-2011 Freescale Semiconductor Inc.
CONTENTS
-Overview
-SEC 4 Node
-Job Ring Node
-Run Time Integrity Check (RTIC) Node
-Run Time Integrity Check (RTIC) Memory Node
-Secure Non-Volatile Storage (SNVS) Node
-Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
-Full Example
NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
Accelerator and Assurance Module (CAAM).
=====================================================================
Overview
DESCRIPTION
SEC 4 h/w can process requests from 2 types of sources.
1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
2. Job Rings (HW interface between cores & SEC 4 registers).
High Speed Data Path Configuration:
HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
such as the P4080. The number of simultaneous dequeues the QI can make is
equal to the number of Descriptor Controller (DECO) engines in a particular
SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
dequeue from 5 subportals simultaneously.
Job Ring Data Path Configuration:
Each JR is located on a separate 4k page, they may (or may not) be made visible
in the memory partition devoted to a particular core. The P4080 has 4 JRs, so
up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
=====================================================================
SEC 4 Node
Description
Node defines the base address of the SEC 4 block.
This block specifies the address range of all global
configuration registers for the SEC 4 block. It
also receives interrupts from the Run Time Integrity Check
(RTIC) function within the SEC 4 block.
PROPERTIES
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,sec-v4.0"
- fsl,sec-era
Usage: optional
Value type: <u32>
Definition: A standard property. Define the 'ERA' of the SEC
device.
- #address-cells
Usage: required
Value type: <u32>
Definition: A standard property. Defines the number of cells
for representing physical addresses in child nodes.
- #size-cells
Usage: required
Value type: <u32>
Definition: A standard property. Defines the number of cells
for representing the size of physical addresses in
child nodes.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical
address and length of the SEC4 configuration registers.
registers
- ranges
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address
range of the SEC 4.0 register space (-SNVS not included). A
triplet that includes the child address, parent address, &
length.
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
consists of one interrupt specifier. The format
of the specifier is defined by the binding document
describing the node's interrupt parent.
- interrupt-parent
Usage: (required if interrupt property is defined)
Value type: <phandle>
Definition: A single <phandle> value that points
to the interrupt parent to which the child domain
is being mapped.
- clocks
Usage: required if SEC 4.0 requires explicit enablement of clocks
Value type: <prop_encoded-array>
Definition: A list of phandle and clock specifier pairs describing
the clocks required for enabling and disabling SEC 4.0.
- clock-names
Usage: required if SEC 4.0 requires explicit enablement of clocks
Value type: <string>
Definition: A list of clock name strings in the same order as the
clocks property.
Note: All other standard properties (see the Devicetree Specification)
are allowed but are optional.
EXAMPLE
iMX6QDL/SX requires four clocks
crypto@300000 {
compatible = "fsl,sec-v4.0";
fsl,sec-era = <2>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x300000 0x10000>;
ranges = <0 0x300000 0x10000>;
interrupt-parent = <&mpic>;
interrupts = <92 2>;
clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
<&clks IMX6QDL_CLK_CAAM_ACLK>,
<&clks IMX6QDL_CLK_CAAM_IPG>,
<&clks IMX6QDL_CLK_EIM_SLOW>;
clock-names = "mem", "aclk", "ipg", "emi_slow";
};
iMX6UL does only require three clocks
crypto: caam@2140000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2140000 0x3c000>;
ranges = <0 0x2140000 0x3c000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
<&clks IMX6UL_CLK_CAAM_ACLK>,
<&clks IMX6UL_CLK_CAAM_IPG>;
clock-names = "mem", "aclk", "ipg";
};
=====================================================================
Job Ring (JR) Node
Child of the crypto node defines data processing interface to SEC 4
across the peripheral bus for purposes of processing
cryptographic descriptors. The specified address
range can be made visible to one (or more) cores.
The interrupt defined for this node is controlled within
the address range of this node.
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,sec-v4.0-job-ring"
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: Specifies a two JR parameters: an offset from
the parent physical address and the length the JR registers.
- fsl,liodn
Usage: optional-but-recommended
Value type: <prop-encoded-array>
Definition:
Specifies the LIODN to be used in conjunction with
the ppid-to-liodn table that specifies the PPID to LIODN mapping.
Needed if the PAMU is used. Value is a 12 bit value
where value is a LIODN ID for this JR. This property is
normally set by boot firmware.
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
consists of one interrupt specifier. The format
of the specifier is defined by the binding document
describing the node's interrupt parent.
- interrupt-parent
Usage: (required if interrupt property is defined)
Value type: <phandle>
Definition: A single <phandle> value that points
to the interrupt parent to which the child domain
is being mapped.
EXAMPLE
jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
fsl,liodn = <0x081>;
interrupt-parent = <&mpic>;
interrupts = <88 2>;
};
=====================================================================
Run Time Integrity Check (RTIC) Node
Child node of the crypto node. Defines a register space that
contains up to 5 sets of addresses and their lengths (sizes) that
will be checked at run time. After an initial hash result is
calculated, these addresses are checked by HW to monitor any
change. If any memory is modified, a Security Violation is
triggered (see SNVS definition).
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,sec-v4.0-rtic".
- #address-cells
Usage: required
Value type: <u32>
Definition: A standard property. Defines the number of cells
for representing physical addresses in child nodes. Must
have a value of 1.
- #size-cells
Usage: required
Value type: <u32>
Definition: A standard property. Defines the number of cells
for representing the size of physical addresses in
child nodes. Must have a value of 1.
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies a two parameters:
an offset from the parent physical address and the length
the SEC4 registers.
- ranges
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address
range of the SEC 4 register space (-SNVS not included). A
triplet that includes the child address, parent address, &
length.
EXAMPLE
rtic@6000 {
compatible = "fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
};
=====================================================================
Run Time Integrity Check (RTIC) Memory Node
A child node that defines individual RTIC memory regions that are used to
perform run-time integrity check of memory areas that should not modified.
The node defines a register that contains the memory address &
length (combined) and a second register that contains the hash result
in big endian format.
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,sec-v4.0-rtic-memory".
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies two parameters:
an offset from the parent physical address and the length:
1. The location of the RTIC memory address & length registers.
2. The location RTIC hash result.
- fsl,rtic-region
Usage: optional-but-recommended
Value type: <prop-encoded-array>
Definition:
Specifies the HW address (36 bit address) for this region
followed by the length of the HW partition to be checked;
the address is represented as a 64 bit quantity followed
by a 32 bit length.
- fsl,liodn
Usage: optional-but-recommended
Value type: <prop-encoded-array>
Definition:
Specifies the LIODN to be used in conjunction with
the ppid-to-liodn table that specifies the PPID to LIODN
mapping. Needed if the PAMU is used. Value is a 12 bit value
where value is a LIODN ID for this RTIC memory region. This
property is normally set by boot firmware.
EXAMPLE
rtic-a@0 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x80>;
fsl,liodn = <0x03c>;
fsl,rtic-region = <0x12345678 0x12345678 0x12345678>;
};
=====================================================================
Secure Non-Volatile Storage (SNVS) Node
Node defines address range and the associated
interrupt for the SNVS function. This function
monitors security state information & reports
security violations. This also included rtc,
system power off and ON/OFF key.
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical
address and length of the SEC4 configuration
registers.
- #address-cells
Usage: required
Value type: <u32>
Definition: A standard property. Defines the number of cells
for representing physical addresses in child nodes. Must
have a value of 1.
- #size-cells
Usage: required
Value type: <u32>
Definition: A standard property. Defines the number of cells
for representing the size of physical addresses in
child nodes. Must have a value of 1.
- ranges
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property. Specifies the physical address
range of the SNVS register space. A triplet that includes
the child address, parent address, & length.
- interrupts
Usage: optional
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
consists of one interrupt specifier. The format
of the specifier is defined by the binding document
describing the node's interrupt parent.
- interrupt-parent
Usage: (required if interrupt property is defined)
Value type: <phandle>
Definition: A single <phandle> value that points
to the interrupt parent to which the child domain
is being mapped.
EXAMPLE
sec_mon@314000 {
compatible = "fsl,sec-v4.0-mon", "syscon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <93 2>;
};
=====================================================================
Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
A SNVS child node that defines SNVS LP RTC.
- compatible
Usage: required
Value type: <string>
Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
- interrupts
Usage: required
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
consists of one interrupt specifier. The format
of the specifier is defined by the binding document
describing the node's interrupt parent.
- regmap
Usage: required
Value type: <phandle>
Definition: this is phandle to the register map node.
- offset
Usage: option
value type: <u32>
Definition: LP register offset. default it is 0x34.
- clocks
Usage: optional, required if SNVS LP RTC requires explicit
enablement of clocks
Value type: <prop_encoded-array>
Definition: a clock specifier describing the clock required for
enabling and disabling SNVS LP RTC.
- clock-names
Usage: optional, required if SNVS LP RTC requires explicit
enablement of clocks
Value type: <string>
Definition: clock name string should be "snvs-rtc".
EXAMPLE
sec_mon_rtc_lp@1 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
interrupts = <93 2>;
regmap = <&snvs>;
offset = <0x34>;
clocks = <&clks IMX7D_SNVS_CLK>;
clock-names = "snvs-rtc";
};
=====================================================================
System ON/OFF key driver
The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF, the driver can report the status of POWER key and wakeup
system if pressed after system suspend.
- compatible:
Usage: required
Value type: <string>
Definition: Mush include "fsl,sec-v4.0-pwrkey".
- interrupts:
Usage: required
Value type: <prop_encoded-array>
Definition: The SNVS ON/OFF interrupt number to the CPU(s).
- linux,keycode:
Usage: option
Value type: <int>
Definition: Keycode to emit, KEY_POWER by default.
- wakeup-source:
Usage: option
Value type: <boo>
Definition: Button can wake-up the system.
- regmap:
Usage: required:
Value type: <phandle>
Definition: this is phandle to the register map node.
EXAMPLE:
snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <0 4 0x4>
linux,keycode = <116>; /* KEY_POWER */
wakeup-source;
};
=====================================================================
FULL EXAMPLE
crypto: crypto@300000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x300000 0x10000>;
ranges = <0 0x300000 0x10000>;
interrupt-parent = <&mpic>;
interrupts = <92 2>;
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <88 2>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <89 2>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <90 2>;
};
sec_jr3: jr@4000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <91 2>;
};
rtic@6000 {
compatible = "fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x80>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x80>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x80>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x500 0x80>;
};
};
};
sec_mon: sec_mon@314000 {
compatible = "fsl,sec-v4.0-mon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
sec_mon_rtc_lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&sec_mon>;
offset = <0x34>;
interrupts = <93 2>;
clocks = <&clks IMX7D_SNVS_CLK>;
clock-names = "snvs-rtc";
};
snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&sec_mon>;
interrupts = <0 4 0x4>;
linux,keycode = <116>; /* KEY_POWER */
wakeup-source;
};
};
=====================================================================