Staging
v0.7.0
v0.7.0
https://github.com/torvalds/linux
Tip revision: 1c23f9e627a7b412978b4e852793c5e3c3efc555 authored by Linus Torvalds on 22 August 2022, 00:32:54 UTC
Linux 6.0-rc2
Linux 6.0-rc2
Tip revision: 1c23f9e
marvell,armada-cp110-utmi-phy.yaml
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Marvell Armada CP110/CP115 UTMI PHY
maintainers:
- Konstantin Porotchkin <kostap@marvell.com>
description:
On Armada 7k/8k and CN913x, there are two host and one device USB controllers.
Each of two exiting UTMI PHYs could be connected to either USB host or USB device
controller.
The USB device controller can only be connected to a single UTMI PHY port
0.H----- USB HOST0
UTMI PHY0 --------/
0.D-----0
\------ USB DEVICE
1.D-----1
UTMI PHY1 --------\
1.H----- USB HOST1
properties:
compatible:
const: marvell,cp110-utmi-phy
reg:
maxItems: 1
"#address-cells":
const: 1
"#size-cells":
const: 0
marvell,system-controller:
description:
Phandle to the system controller node
$ref: /schemas/types.yaml#/definitions/phandle
#Required child nodes:
patternProperties:
"^usb-phy@[0|1]$":
type: object
description:
Each UTMI PHY port must be represented as a sub-node.
properties:
reg:
description: phy port index.
maxItems: 1
"#phy-cells":
const: 0
required:
- reg
- "#phy-cells"
additionalProperties: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- marvell,system-controller
additionalProperties: false
examples:
- |
cp0_utmi: utmi@580000 {
compatible = "marvell,cp110-utmi-phy";
reg = <0x580000 0x2000>;
marvell,system-controller = <&cp0_syscon0>;
#address-cells = <1>;
#size-cells = <0>;
cp0_utmi0: usb-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
cp0_utmi1: usb-phy@1 {
reg = <1>;
#phy-cells = <0>;
};
};
cp0_usb3_0 {
usb-phy = <&cp0_usb3_0_phy0>;
phys = <&cp0_utmi0>;
phy-names = "utmi";
/* UTMI0 is connected to USB host controller (default mode) */
dr_mode = "host";
};
cp0_usb3_1 {
usb-phy = <&cp0_usb3_0_phy1>;
phys = <&cp0_utmi1>;
phy-names = "utmi";
/* UTMI1 is connected to USB device controller */
dr_mode = "peripheral";
};