Staging
v0.7.0
v0.7.0
/*
comedi/drivers/icp_multi.c
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 1997-2002 David A. Schleef <ds@schleef.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
/*
Driver: icp_multi
Description: Inova ICP_MULTI
Author: Anne Smorthit <anne.smorthit@sfwte.ch>
Devices: [Inova] ICP_MULTI (icp_multi)
Status: works
The driver works for analog input and output and digital input and output.
It does not work with interrupts or with the counters. Currently no support
for DMA.
It has 16 single-ended or 8 differential Analogue Input channels with 12-bit
resolution. Ranges : 5V, 10V, +/-5V, +/-10V, 0..20mA and 4..20mA. Input
ranges can be individually programmed for each channel. Voltage or current
measurement is selected by jumper.
There are 4 x 12-bit Analogue Outputs. Ranges : 5V, 10V, +/-5V, +/-10V
16 x Digital Inputs, 24V
8 x Digital Outputs, 24V, 1A
4 x 16-bit counters
Configuration options: not applicable, uses PCI auto config
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#define PCI_DEVICE_ID_ICP_MULTI 0x8000
#define ICP_MULTI_ADC_CSR 0 /* R/W: ADC command/status register */
#define ICP_MULTI_AI 2 /* R: Analogue input data */
#define ICP_MULTI_DAC_CSR 4 /* R/W: DAC command/status register */
#define ICP_MULTI_AO 6 /* R/W: Analogue output data */
#define ICP_MULTI_DI 8 /* R/W: Digital inouts */
#define ICP_MULTI_DO 0x0A /* R/W: Digital outputs */
#define ICP_MULTI_INT_EN 0x0C /* R/W: Interrupt enable register */
#define ICP_MULTI_INT_STAT 0x0E /* R/W: Interrupt status register */
#define ICP_MULTI_CNTR0 0x10 /* R/W: Counter 0 */
#define ICP_MULTI_CNTR1 0x12 /* R/W: counter 1 */
#define ICP_MULTI_CNTR2 0x14 /* R/W: Counter 2 */
#define ICP_MULTI_CNTR3 0x16 /* R/W: Counter 3 */
/* Define bits from ADC command/status register */
#define ADC_ST 0x0001 /* Start ADC */
#define ADC_BSY 0x0001 /* ADC busy */
#define ADC_BI 0x0010 /* Bipolar input range 1 = bipolar */
#define ADC_RA 0x0020 /* Input range 0 = 5V, 1 = 10V */
#define ADC_DI 0x0040 /* Differential input mode 1 = differential */
/* Define bits from DAC command/status register */
#define DAC_ST 0x0001 /* Start DAC */
#define DAC_BSY 0x0001 /* DAC busy */
#define DAC_BI 0x0010 /* Bipolar input range 1 = bipolar */
#define DAC_RA 0x0020 /* Input range 0 = 5V, 1 = 10V */
/* Define bits from interrupt enable/status registers */
#define ADC_READY 0x0001 /* A/d conversion ready interrupt */
#define DAC_READY 0x0002 /* D/a conversion ready interrupt */
#define DOUT_ERROR 0x0004 /* Digital output error interrupt */
#define DIN_STATUS 0x0008 /* Digital input status change interrupt */
#define CIE0 0x0010 /* Counter 0 overrun interrupt */
#define CIE1 0x0020 /* Counter 1 overrun interrupt */
#define CIE2 0x0040 /* Counter 2 overrun interrupt */
#define CIE3 0x0080 /* Counter 3 overrun interrupt */
/* Useful definitions */
#define Status_IRQ 0x00ff /* All interrupts */
/* Define analogue range */
static const struct comedi_lrange range_analog = {
4, {
UNI_RANGE(5),
UNI_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(10)
}
};
static const char range_codes_analog[] = { 0x00, 0x20, 0x10, 0x30 };
/*
==============================================================================
Data & Structure declarations
==============================================================================
*/
struct icp_multi_private {
char valid; /* card is usable */
void __iomem *io_addr; /* Pointer to mapped io address */
unsigned int AdcCmdStatus; /* ADC Command/Status register */
unsigned int DacCmdStatus; /* DAC Command/Status register */
unsigned int IntEnable; /* Interrupt Enable register */
unsigned int IntStatus; /* Interrupt Status register */
unsigned int act_chanlist[32]; /* list of scanned channel */
unsigned char act_chanlist_len; /* len of scanlist */
unsigned char act_chanlist_pos; /* actual position in MUX list */
unsigned int *ai_chanlist; /* actaul chanlist */
unsigned short ao_data[4]; /* data output buffer */
unsigned int do_data; /* Remember digital output data */
};
static void setup_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int n_chan)
{
struct icp_multi_private *devpriv = dev->private;
unsigned int i, range, chanprog;
unsigned int diff;
devpriv->act_chanlist_len = n_chan;
devpriv->act_chanlist_pos = 0;
for (i = 0; i < n_chan; i++) {
/* Get channel */
chanprog = CR_CHAN(chanlist[i]);
/* Determine if it is a differential channel (Bit 15 = 1) */
if (CR_AREF(chanlist[i]) == AREF_DIFF) {
diff = 1;
chanprog &= 0x0007;
} else {
diff = 0;
chanprog &= 0x000f;
}
/* Clear channel, range and input mode bits
* in A/D command/status register */
devpriv->AdcCmdStatus &= 0xf00f;
/* Set channel number and differential mode status bit */
if (diff) {
/* Set channel number, bits 9-11 & mode, bit 6 */
devpriv->AdcCmdStatus |= (chanprog << 9);
devpriv->AdcCmdStatus |= ADC_DI;
} else
/* Set channel number, bits 8-11 */
devpriv->AdcCmdStatus |= (chanprog << 8);
/* Get range for current channel */
range = range_codes_analog[CR_RANGE(chanlist[i])];
/* Set range. bits 4-5 */
devpriv->AdcCmdStatus |= range;
/* Output channel, range, mode to ICP Multi */
writew(devpriv->AdcCmdStatus,
devpriv->io_addr + ICP_MULTI_ADC_CSR);
}
}
static int icp_multi_ai_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
struct icp_multi_private *devpriv = dev->private;
unsigned int status;
status = readw(devpriv->io_addr + ICP_MULTI_ADC_CSR);
if ((status & ADC_BSY) == 0)
return 0;
return -EBUSY;
}
static int icp_multi_insn_read_ai(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct icp_multi_private *devpriv = dev->private;
int ret = 0;
int n;
/* Disable A/D conversion ready interrupt */
devpriv->IntEnable &= ~ADC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
/* Clear interrupt status */
devpriv->IntStatus |= ADC_READY;
writew(devpriv->IntStatus, devpriv->io_addr + ICP_MULTI_INT_STAT);
/* Set up appropriate channel, mode and range data, for specified ch */
setup_channel_list(dev, s, &insn->chanspec, 1);
for (n = 0; n < insn->n; n++) {
/* Set start ADC bit */
devpriv->AdcCmdStatus |= ADC_ST;
writew(devpriv->AdcCmdStatus,
devpriv->io_addr + ICP_MULTI_ADC_CSR);
devpriv->AdcCmdStatus &= ~ADC_ST;
udelay(1);
/* Wait for conversion to complete, or get fed up waiting */
ret = comedi_timeout(dev, s, insn, icp_multi_ai_eoc, 0);
if (ret)
break;
data[n] =
(readw(devpriv->io_addr + ICP_MULTI_AI) >> 4) & 0x0fff;
}
/* Disable interrupt */
devpriv->IntEnable &= ~ADC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
/* Clear interrupt status */
devpriv->IntStatus |= ADC_READY;
writew(devpriv->IntStatus, devpriv->io_addr + ICP_MULTI_INT_STAT);
return ret ? ret : n;
}
static int icp_multi_ao_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
struct icp_multi_private *devpriv = dev->private;
unsigned int status;
status = readw(devpriv->io_addr + ICP_MULTI_DAC_CSR);
if ((status & DAC_BSY) == 0)
return 0;
return -EBUSY;
}
static int icp_multi_insn_write_ao(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct icp_multi_private *devpriv = dev->private;
int n, chan, range;
int ret;
/* Disable D/A conversion ready interrupt */
devpriv->IntEnable &= ~DAC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
/* Clear interrupt status */
devpriv->IntStatus |= DAC_READY;
writew(devpriv->IntStatus, devpriv->io_addr + ICP_MULTI_INT_STAT);
/* Get channel number and range */
chan = CR_CHAN(insn->chanspec);
range = CR_RANGE(insn->chanspec);
/* Set up range and channel data */
/* Bit 4 = 1 : Bipolar */
/* Bit 5 = 0 : 5V */
/* Bit 5 = 1 : 10V */
/* Bits 8-9 : Channel number */
devpriv->DacCmdStatus &= 0xfccf;
devpriv->DacCmdStatus |= range_codes_analog[range];
devpriv->DacCmdStatus |= (chan << 8);
writew(devpriv->DacCmdStatus, devpriv->io_addr + ICP_MULTI_DAC_CSR);
for (n = 0; n < insn->n; n++) {
/* Wait for analogue output data register to be
* ready for new data, or get fed up waiting */
ret = comedi_timeout(dev, s, insn, icp_multi_ao_eoc, 0);
if (ret) {
/* Disable interrupt */
devpriv->IntEnable &= ~DAC_READY;
writew(devpriv->IntEnable,
devpriv->io_addr + ICP_MULTI_INT_EN);
/* Clear interrupt status */
devpriv->IntStatus |= DAC_READY;
writew(devpriv->IntStatus,
devpriv->io_addr + ICP_MULTI_INT_STAT);
/* Clear data received */
devpriv->ao_data[chan] = 0;
return ret;
}
/* Write data to analogue output data register */
writew(data[n], devpriv->io_addr + ICP_MULTI_AO);
/* Set DAC_ST bit to write the data to selected channel */
devpriv->DacCmdStatus |= DAC_ST;
writew(devpriv->DacCmdStatus,
devpriv->io_addr + ICP_MULTI_DAC_CSR);
devpriv->DacCmdStatus &= ~DAC_ST;
/* Save analogue output data */
devpriv->ao_data[chan] = data[n];
}
return n;
}
static int icp_multi_insn_read_ao(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct icp_multi_private *devpriv = dev->private;
int n, chan;
/* Get channel number */
chan = CR_CHAN(insn->chanspec);
/* Read analogue outputs */
for (n = 0; n < insn->n; n++)
data[n] = devpriv->ao_data[chan];
return n;
}
static int icp_multi_insn_bits_di(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct icp_multi_private *devpriv = dev->private;
data[1] = readw(devpriv->io_addr + ICP_MULTI_DI);
return insn->n;
}
static int icp_multi_insn_bits_do(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct icp_multi_private *devpriv = dev->private;
if (comedi_dio_update_state(s, data))
writew(s->state, devpriv->io_addr + ICP_MULTI_DO);
data[1] = readw(devpriv->io_addr + ICP_MULTI_DI);
return insn->n;
}
static int icp_multi_insn_read_ctr(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
return 0;
}
static int icp_multi_insn_write_ctr(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
return 0;
}
static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
{
struct comedi_device *dev = d;
struct icp_multi_private *devpriv = dev->private;
int int_no;
/* Is this interrupt from our board? */
int_no = readw(devpriv->io_addr + ICP_MULTI_INT_STAT) & Status_IRQ;
if (!int_no)
/* No, exit */
return IRQ_NONE;
/* Determine which interrupt is active & handle it */
switch (int_no) {
case ADC_READY:
break;
case DAC_READY:
break;
case DOUT_ERROR:
break;
case DIN_STATUS:
break;
case CIE0:
break;
case CIE1:
break;
case CIE2:
break;
case CIE3:
break;
default:
break;
}
return IRQ_HANDLED;
}
#if 0
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int n_chan)
{
unsigned int i;
/* Check that we at least have one channel to check */
if (n_chan < 1) {
comedi_error(dev, "range/channel list is empty!");
return 0;
}
/* Check all channels */
for (i = 0; i < n_chan; i++) {
/* Check that channel number is < maximum */
if (CR_AREF(chanlist[i]) == AREF_DIFF) {
if (CR_CHAN(chanlist[i]) > (s->nchan / 2)) {
comedi_error(dev,
"Incorrect differential ai ch-nr");
return 0;
}
} else {
if (CR_CHAN(chanlist[i]) > s->n_chan) {
comedi_error(dev,
"Incorrect ai channel number");
return 0;
}
}
}
return 1;
}
#endif
static int icp_multi_reset(struct comedi_device *dev)
{
struct icp_multi_private *devpriv = dev->private;
unsigned int i;
/* Clear INT enables and requests */
writew(0, devpriv->io_addr + ICP_MULTI_INT_EN);
writew(0x00ff, devpriv->io_addr + ICP_MULTI_INT_STAT);
/* Set DACs to 0..5V range and 0V output */
for (i = 0; i < 4; i++) {
devpriv->DacCmdStatus &= 0xfcce;
/* Set channel number */
devpriv->DacCmdStatus |= (i << 8);
/* Output 0V */
writew(0, devpriv->io_addr + ICP_MULTI_AO);
/* Set start conversion bit */
devpriv->DacCmdStatus |= DAC_ST;
/* Output to command / status register */
writew(devpriv->DacCmdStatus,
devpriv->io_addr + ICP_MULTI_DAC_CSR);
/* Delay to allow DAC time to recover */
udelay(1);
}
/* Digital outputs to 0 */
writew(0, devpriv->io_addr + ICP_MULTI_DO);
return 0;
}
static int icp_multi_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct icp_multi_private *devpriv;
struct comedi_subdevice *s;
int ret;
devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
if (!devpriv)
return -ENOMEM;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
devpriv->io_addr = pci_ioremap_bar(pcidev, 2);
if (!devpriv->io_addr)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 5);
if (ret)
return ret;
icp_multi_reset(dev);
if (pcidev->irq) {
ret = request_irq(pcidev->irq, interrupt_service_icp_multi,
IRQF_SHARED, dev->board_name, dev);
if (ret == 0)
dev->irq = pcidev->irq;
}
s = &dev->subdevices[0];
dev->read_subdev = s;
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF;
s->n_chan = 16;
s->maxdata = 0x0fff;
s->len_chanlist = 16;
s->range_table = &range_analog;
s->insn_read = icp_multi_insn_read_ai;
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 4;
s->maxdata = 0x0fff;
s->len_chanlist = 4;
s->range_table = &range_analog;
s->insn_write = icp_multi_insn_write_ao;
s->insn_read = icp_multi_insn_read_ao;
s = &dev->subdevices[2];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 16;
s->maxdata = 1;
s->len_chanlist = 16;
s->range_table = &range_digital;
s->insn_bits = icp_multi_insn_bits_di;
s = &dev->subdevices[3];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
s->n_chan = 8;
s->maxdata = 1;
s->len_chanlist = 8;
s->range_table = &range_digital;
s->insn_bits = icp_multi_insn_bits_do;
s = &dev->subdevices[4];
s->type = COMEDI_SUBD_COUNTER;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 4;
s->maxdata = 0xffff;
s->len_chanlist = 4;
s->state = 0;
s->insn_read = icp_multi_insn_read_ctr;
s->insn_write = icp_multi_insn_write_ctr;
devpriv->valid = 1;
return 0;
}
static void icp_multi_detach(struct comedi_device *dev)
{
struct icp_multi_private *devpriv = dev->private;
if (devpriv)
if (devpriv->valid)
icp_multi_reset(dev);
if (dev->irq)
free_irq(dev->irq, dev);
if (devpriv && devpriv->io_addr)
iounmap(devpriv->io_addr);
comedi_pci_disable(dev);
}
static struct comedi_driver icp_multi_driver = {
.driver_name = "icp_multi",
.module = THIS_MODULE,
.auto_attach = icp_multi_auto_attach,
.detach = icp_multi_detach,
};
static int icp_multi_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &icp_multi_driver, id->driver_data);
}
static const struct pci_device_id icp_multi_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ICP, PCI_DEVICE_ID_ICP_MULTI) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, icp_multi_pci_table);
static struct pci_driver icp_multi_pci_driver = {
.name = "icp_multi",
.id_table = icp_multi_pci_table,
.probe = icp_multi_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(icp_multi_driver, icp_multi_pci_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");